Multi-objective optimisation for battery electric vehicle powertrain topologies

Electric vehicles are becoming more popular in the market. To be competitive, manufacturers need to produce vehicles with a low energy consumption, a good range and an acceptable driving performance. These are dependent on the choice of components and the topology in which they are used. In a conventional gasoline vehicle, the powertrain topology is constrained to a few well-understood layouts; these typically consist of a single engine driving one axle or both axles through a multi-ratio gearbox. With electric vehicles, there is more flexibility, and the design space is relatively unexplored. In this paper, we evaluate several different topologies as follows: a traditional topology using a single electric motor driving a single axle with a fixed gear ratio; a topology using separate motors for the front axle and the rear axle, each with its own fixed gear ratio; a topology using in-wheel motors on a single axle; a four-wheel-drive topology using in-wheel motors on both axes. Multi-objective optimisation techniques are used to find the optimal component sizing for a given requirement set and to investigate the trade-offs between the energy consumption, the powertrain cost and the acceleration performance. The paper concludes with a discussion of the relative merits of the different topologies and their applicability to real-world passenger cars

Advanced methodology for the optimal sizing of the energy storage system in a hybrid electric refuse collector vehicle using real routes

This paper presents a new methodology for optimal sizing of the energy storage system ( ESS ), with the aim of being used in the design process of a hybrid electric (HE) refuse collector vehicle ( RCV ). This methodology has, as the main element, to model a multi-objective optimisation problem that considers the specific energy of a basic cell of lithium polymer ( Li – Po ) battery and the cost of manufacture. Furthermore, optimal space solutions are determined from a multi-objective genetic algorithm that considers linear inequalities and limits in the decision variables. Subsequently, it is proposed to employ optimal space solutions for sizing the energy storage system, based on the energy required by the drive cycle of a conventional refuse collector vehicle. In addition, it is proposed to discard elements of optimal space solutions for sizing the energy storage system so as to achieve the highest fuel economy in the hybrid electric refuse collector vehicle design phase.Postprint (published version

Feasibility of Electrified Propulsion for Ultra-Efficient Commercial Aircraft Final Report

MIT, Aurora Flight Sciences, and USC have collaborated to assess the feasibility of electric, hybridelectric, and turbo-electric propulsion for ultra-efficient commercial transportation. The work has drawn on the team expertise in disciplines related to aircraft design, propulsion-airframe integration, electric machines and systems, engineering system design, and optimization. A parametric trade space analysis has been carried out to assess vehicle performance across a range of transport missions and propulsion architectures to establish how electrified propulsion systems scale. An optimization approach to vehicle conceptual design modeling was taken to enable rapid multidisciplinary design space exploration and sensitivity analysis. The results of the analysis indicate vehicle aero-propulsive integration benefits enabled by electrification are required to offset the increased weight and loss associated with the electric system and achieve enhanced performance; the report describes the conceptual configurations than can offer such enhancements. The main contribution of the present work is the definition of electric vehicle design attributes for potential efficiency improvements at different scales. Based on these results, key areas for future research are identified, and extensions to the trade space analysis suitable for higher fidelity electrified commercial aircraft design and analysis have been developed

Optimized energy management strategies and sizing of hybrid storage systems for transport applications

205 p. El contenido del capítulo 4, sección 4.3 está sujeto a confidencialidad.Esta tesis doctoral aborda la temática acerca del óptimo dimensionamiento y operación de sistemashíbridos de almacenamiento de energía (HESS), combinando baterías y supercapacitores, con el objetivode ser integrados en vehículos para movilidad pública en entornos urbanos. Por una parte, se propone unainnovadora estrategia energética, basada en lógica difusa, para gestionar la división de la demanda depotencia entre las fuentes de energía disponibles a bordo del vehículo. La estrategia adaptativa que sepropone evalúa la información energética actual y futura (estimada) para adaptar, de una formaoptimizada y eficiente, la operación del sistema con el objetivo de mejorar el aprovechamiento de laenergía almacenada en los recursos a bordo del vehículo.Por otro lado, se ha propuesto una metodología para la co-optimización de la estrategia de gestión ydimensionamiento del HESS. Esta metodología de optimización evalúa tanto técnica comoeconómicamente las posibles soluciones mediante un problema multi-objetivo basado en algoritmosgenéticos. Para determinar el costo de reemplazo del HESS han sido aplicados modelo de envejecimientoy estimación de vida y se ha considerado la vida útil del vehículo.Con el objetivo de validar la propuesta de esta tesis doctoral, dos casos de estudio relevantes en latransportación pública han sido seleccionados: Tranvía Eléctrico Híbrido y Autobús Eléctrico Híbrido

Combined design and control optimization of hybrid vehicles

Hybrid vehicles play an important role in reducing energy consumption and pollutant emissions of ground transportation. The increased mechatronic system complexity, however, results in a heavy challenge for efficient component sizing and power coordination among multiple power sources. This chapter presents a convex programming framework for the combined design and control optimization of hybrid vehicles. An instructive and straightforward case study of design and energy control optimization for a fuel cell/supercapacitor hybrid bus is delineated to demonstrate the effectiveness and the computational advantage of the convex programming methodology. Convex modeling of key components in the fuel cell/supercapactior hybrid powertrain is introduced, while a pseudo code in CVX is also provided to elucidate how to practically implement the convex optimization. The generalization, applicability, and validity of the convex optimization framework are also discussed for various powertrain configurations (i.e., series, parallel, and series-parallel), different energy storage systems (e.g., battery, supercapacitor, and dual buffer), and advanced vehicular design and controller synthesis accounting for the battery thermal and aging conditions. The proposed methodology is an efficient tool that is valuable for researchers and engineers in the area of hybrid vehicles to address realistic optimal control problems

Toward Holistic Energy Management Strategies for Fuel Cell Hybrid Electric Vehicles in Heavy-Duty Applications

The increasing need to slow down climate change for environmental protection demands further advancements toward regenerative energy and sustainable mobility. While individual mobility applications are assumed to be satisfied with improving battery electric vehicles (BEVs), the growing sector of freight transport and heavy-duty applications requires alternative solutions to meet the requirements of long ranges and high payloads. Fuel cell hybrid electric vehicles (FCHEVs) emerge as a capable technology for high-energy applications. This technology comprises a fuel cell system (FCS) for energy supply combined with buffering energy storages, such as batteries or ultracapacitors. In this article, recent successful developments regarding FCHEVs in various heavy-duty applications are presented. Subsequently, an overview of the FCHEV drivetrain, its main components, and different topologies with an emphasis on heavy-duty trucks is given. In order to enable system layout optimization and energy management strategy (EMS) design, functionality and modeling approaches for the FCS, battery, ultracapacitor, and further relevant subsystems are briefly described. Afterward, common methodologies for EMS are structured, presenting a new taxonomy for dynamic optimization-based EMS from a control engineering perspective. Finally, the findings lead to a guideline toward holistic EMS, encouraging the co-optimization of system design, and EMS development for FCHEVs. For the EMS, we propose a layered model predictive control (MPC) approach, which takes velocity planning, the mitigation of degradation effects, and the auxiliaries into account simultaneously