Multi-sensor and data fusion approach for determining yield limiting factors and for in-situ measurement of yellow rust and fusarium head blight in cereals

The world’s population is increasing and along with it, the demand for food. A novel parametric model (Volterra Non-linear Regressive with eXogenous inputs (VNRX)) is introduced for quantifying influences of individual and multiple soil properties on crop yield and normalised difference vegetation Index. The performance was compared to a random forest method over two consecutive years, with the best results of 55.6% and 52%, respectively. The VNRX was then implemented using high sampling resolution soil data collected with an on-line visible and near infrared (vis-NIR) spectroscopy sensor predicting yield variation of 23.21%. A hyperspectral imager coupled with partial least squares regression was successfully applied in the detection of fusarium head blight and yellow rust infection in winter wheat and barley canopies, under laboratory and on-line measurement conditions. Maps of the two diseases were developed for four fields. Spectral indices of the standard deviation between 500 to 650 nm, and the squared difference between 650 and 700 nm, were found to be useful in differentiating between the two diseases, in the two crops, under variable water stress. The optimisation of the hyperspectral imager for field measurement was based on signal-to-noise ratio, and considered; camera angle and distance, integration time, and light source angle and distance from the crop canopy. The study summarises in the proposal of a new method of disease management through suggested selective harvest and fungicide applications, for winter wheat and barley which theoretically reduced fungicide rate by an average of 24% and offers a combined saving of the two methods of £83 per hectare

Spatiotemporal dynamics of stress factors in wheat analysed by multisensoral remote sensing and geostatistics

Plant stresses, in particular fungal diseases, basically show a high variability in space and time with respect to their impact on the host. Recent ‘Precision Agriculture’ techniques allow for a spatially and temporally adjusted pest control that might reduce the amount of cost-intensive and ecologically harmful agrochemicals. Conventional stress detection techniques such as random monitoring do not meet demands of such optimally placed management actions. The prerequisite is a profound knowledge about the controlled phenomena as well as their accurate sensor-based detection. Therefore, the present study focused on spatiotemporal dynamics of stress factors in wheat, Europe’s main crop. Primarily, the spatiotemporal characteristics of the fungal diseases, powdery mildew (Blumeria graminis) and leaf rust (Puccinia recondita), were analysed by remote sensing techniques and geo-statistics on leaf and field scale. Basically, there are two different approaches to sensor-based detection of crop stresses: near-range sensors and airborne-/satellite-borne sensors. In order to assess the potential of both approaches, various experiments in field and laboratory were carried out with the use of multiple sensors operated at different scales. Besides the spatial dimension of crop stresses, all studies focussed on the temporal dimension of these phenomena, since this is the key question for an operational use of these techniques. In addition, a comparison between multispectral and hyperspectral data gave an indication of their suitability for this purpose. The results exhibit very high spatiotemporal dynamics for both fungal diseases. However, powdery mildew and leaf rust showed different characteristics, with leaf rust showing a more systematic temporal progress. The physiological behaviours of the phenomena, which are strongly influenced by various environmental factors, define the optimal disease detection date as well as the temporal resolution required for sensor-based disease detection. Due to the high spatiotemporal dynamics of the investigated diseases, a general recommendation of optimal detection periods can not be given, but critical periods are highlighted for each pathogen. The results indicate that multispectral remote sensing data with high spatial resolution shows a high potential for quantifying crop vigour by using spectral mixture analyses. Simulated endmembers for the identification of stressed wheat areas were utilized, whereby promising results could be achieved. However, due to the low spectral resolution of these data, a discrimination of stress factors or early disease detection is not possible. Hyperspectral data was therefore used to point out the potential of early detection of crop diseases, which is a crucial and restrictive factor for Precision Agriculture applications. In a laboratory experiment, leaf rust infections could be detected by hyperspectral data five days after inoculation. In a field experiment with respect to early stress detection, it could be demonstrated that hyperspectral data outperformed multispectral data. High accuracy for the detection of powdery mildew infections in the field was thereby achieved. Due to the fact that typical spatiotemporal characteristics for each pathogen were found, there is a high potential for decision support systems, considering all variables that affect the disease progress. Besides the further analysis of hyperspectral data for disease detection, the development of a decision support system is the subject of the upcoming last period of the Research Training Group 722

Crop Disease Detection Using Remote Sensing Image Analysis

Pest and crop disease threats are often estimated by complex changes in crops and the applied agricultural practices that result mainly from the increasing food demand and climate change at global level. In an attempt to explore high-end and sustainable solutions for both pest and crop disease management, remote sensing technologies have been employed, taking advantages of possible changes deriving from relative alterations in the metabolic activity of infected crops which in turn are highly associated to crop spectral reflectance properties. Recent developments applied to high resolution data acquired with remote sensing tools, offer an additional tool which is the opportunity of mapping the infected field areas in the form of patchy land areas or those areas that are susceptible to diseases. This makes easier the discrimination between healthy and diseased crops, providing an additional tool to crop monitoring. The current book brings together recent research work comprising of innovative applications that involve novel remote sensing approaches and their applications oriented to crop disease detection. The book provides an in-depth view of the developments in remote sensing and explores its potential to assess health status in crops

UAVs for Vegetation Monitoring: Overview and Recent Scientific Contributions

This paper reviewed a set of twenty-one original and innovative papers included in a special issue on UAVs for vegetation monitoring, which proposed new methods and techniques applied to diverse agricultural and forestry scenarios. Three general categories were considered: (1) sensors and vegetation indices used, (2) technological goals pursued, and (3) agroforestry applications. Some investigations focused on issues related to UAV flight operations, spatial resolution requirements, and computation and data analytics, while others studied the ability of UAVs for characterizing relevant vegetation features (mainly canopy cover and crop height) or for detecting different plant/crop stressors, such as nutrient content/deficiencies, water needs, weeds, and diseases. The general goal was proposing UAV-based technological solutions for a better use of agricultural and forestry resources and more efficient production with relevant economic and environmental benefits

Plant Breeding and Management Strategies to Minimize the Impact of Water Scarcity and Biotic Stress in Cereal Crops under Mediterranean Conditions

Wheat and rice are two main staple food crops that may suffer from yield losses due to drought episodes that are increasingly impacted by climate change, in addition to new epidemic outbreaks. Sustainable intensification of production will rely on several strategies, such as efficient use of water and variety improvement. This review updates the latest findings regarding complementary approaches in agronomy, genetics, and phenomics to cope with climate change challenges. The agronomic approach focuses on a case study examining alternative rice water management practices, with their impact on greenhouse gas emissions and biodiversity for ecosystem services. The genetic approach reviews in depth the latest technologies to achieve fungal disease resistance, as well as the use of landraces to increase the genetic diversity of new varieties. The phenomics approach explores recent advances in high-throughput remote sensing technologies useful in detecting both biotic and abiotic stress effects on breeding programs. The complementary nature of all these technologies indicates that only interdisciplinary work will ensure significant steps towards a more sustainable agriculture under future climate change scenarios.info:eu-repo/semantics/publishedVersio

Application of UAV based high-resolution remote sensing for crop monitoring

Advances in technologies could offer enormous potential for crop monitoring applications, allowing the real-time acquisition of various environmental data. Technology such as high spatio-temporal imagery of unmanned aerial vehicles (UAV’s) can be widely used in crop monitoring applications. These technologies are expected to revolutionize the global agriculture practices, by enabling decision-making during the crop cycle days. Such results allow the effective practice of agricultural inputs, aiding precision agriculture pillars, i.e., applying the right practice in the right place, with the right amount and time. However, the actual exploitation of UAV’s has not been much strong in smart farming, mainly due to the challenges faced during selecting and deploying relevant technologies, including data acquisition and processing methods. The major problem is that there is still no consistent workflow for the use of UAV’s in such areas, as this mechanization is relatively new. In this article, the latest applications of UAV’s for crop monitoring are reviewed. It covers the most common applications, the types of UAV’s used and then we focused on data acquisition methods and technologies, employing the benefit and drawbacks of each. It also indicates the most popular image processing methods and summarizes the potential application in agricultural operations. 

Evaluating management zone maps for variable rate fungicide application and selective harvest

Currently the majority of crop protection approaches are based on homogeneous rate fungicide application (HRFA) over the entire field area. With the increasing pressures on fungicide applications, associated with increased environmental impact and cost, an alternative approach based on variable rate fungicide application (VRFA) and selective harvest (SH) is needed. This study was undertaken to evaluate the economic viability of adopting VRSA and SH in winter wheat and the environmental benefit in terms of chemical reduction is also discussed. High resolution data of crop canopy properties, yellow rust, fusarium head blight (FHB), soil properties and yield were subjected to k-means cluster analysis to develop management zone (MZ) maps for one field in Bedfordshire, UK. Virtual cost-benefit analysis for VRFA was performed on three fungicide application timings, namely, T1 and T2 focused on yellow rust, and T3 focused on FHB. Cost-benefit analysis was also applied to SH, which assumed different selling prices between healthy and grain downgraded due to mycotoxin infection. Results showed that in this study VRFA allowed for fungicide reductions of 22.24% at T1 and T2 and 25.93% at T3 when compared to HRFA. SH reduced the risk of market rejection due to low quality and high mycotoxin content. Gross profit of combining SH and VRFA was £83.35 per hectare per year, divided into SH £48.04 ha−1, and VRFA £8.8 ha−1 for T1 and T2 and £17.7 ha−1 for T3. Total profit when considering soil and crop scanning costs would be £66.85 ha−1 per year, which is roughly equivalent to €80 or $90 ha−1 per year. This study was restricted to a single field but demonstrates the potential of fungicide reductions and economic viability of this MZ concept

Spatio-temporal monitoring of wheat yellow rust using UAV multispectral imagery

This work is focused on the spatio-temporal monitoring of winter wheat inoculated with various levels of yellow rust inoculum during the entire growth season. A dedicated work ow is devised to obtain time-series five-bands (visible-infrared) aerial imageries with a multispectral camera and an Unmanned Aerial Vehicle. A number of spectral indices are drawn so that the sensitive ones can be identi fied by statistical dependency analysis; particularly, their discriminating capabilities are evaluated at diffeerent stages for both wheat pixel segmentation and yellow rust severity. Then the spatial-temporal changes of sensitive bands/indices are evaluated and analysed quantitatively. A validation fi eld experiment was designed in 2017-2018 by inoculating wheat with one of the six levels of yellow rust inoculum. Five-bands RedEdge camera on-board DJI S1000 was used to capture aerial images at eight time points covering the entire growth season at an altitude of about 20 meters with a ground resolution of 1-1.5 cm/pixel. Experimental results via spatio-temporal analysis show that: (1) various bands/indices should be used for wheat segmentation at different stages; (2) no bands/indices differences are observed for yellow rust inoculated wheat plots in both incubation stage (9 days after inoculation) and early onset stage (25 days after inoculation); (3) NIR and Red are the sensitive bands for wheat yellow rust in disease stages (45 days after inoculation); and their normalized difference NDVI index provides an even higher statistical dependency; (4) bands/indices' sensitivity to yellow rust changes over time and decreases in later Heading stage until being very low in Ripening stage (61 days after inoculation). This experimental study provides a crucial guidance for future early spatio-temporal yellow rust monitoring at farmland scales