Model based fault diagnosis and prognosis of class of linear and nonlinear distributed parameter systems modeled by partial differential equations

With the rapid development of modern control systems, a significant number of industrial systems may suffer from component failures. An accurate yet faster fault prognosis and resilience can improve system availability and reduce unscheduled downtime. Therefore, in this dissertation, model-based prognosis and resilience control schemes have been developed for online prediction and accommodation of faults for distributed parameter systems (DPS). First, a novel fault detection, estimation and prediction framework is introduced utilizing a novel observer for a class of linear DPS with bounded disturbance by modeling the DPS as a set of partial differential equations. To relax the state measurability in DPS, filters are introduced to redesign the detection observer. Upon detecting a fault, an adaptive term is activated to estimate the multiplicative fault and a tuning law is derived to tune the fault parameter magnitude. Then based on this estimated fault parameter together with its failure limit, time-to-failure (TTF) is derived for prognosis. A novel fault accommodation scheme is developed to handle actuator and sensor faults with boundary measurements. Next, a fault isolation scheme is presented to differentiate actuator, sensor and state faults with a limited number of measurements for a class of linear and nonlinear DPS. Subsequently, actuator and sensor fault detection and prediction for a class of nonlinear DPS are considered with bounded disturbance by using a Luenberger observer. Finally, a novel resilient control scheme is proposed for nonlinear DPS once an actuator fault is detected by using an additional boundary measurement. In all the above methods, Lyapunov analysis is utilized to show the boundedness of the closed-loop signals during fault detection, prediction and resilience under mild assumptions --Abstract, page iv

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Mathematical control of complex systems 2013

Mathematical control of complex systems have already become an ideal research area for control engineers, mathematicians, computer scientists, and biologists to understand, manage, analyze, and interpret functional information/dynamical behaviours from real-world complex dynamical systems, such as communication systems, process control, environmental systems, intelligent manufacturing systems, transportation systems, and structural systems. This special issue aims to bring together the latest/innovative knowledge and advances in mathematics for handling complex systems. Topics include, but are not limited to the following: control systems theory (behavioural systems, networked control systems, delay systems, distributed systems, infinite-dimensional systems, and positive systems); networked control (channel capacity constraints, control over communication networks, distributed filtering and control, information theory and control, and sensor networks); and stochastic systems (nonlinear filtering, nonparametric methods, particle filtering, partial identification, stochastic control, stochastic realization, system identification)

Dynamic state reconciliation and model-based fault detection for chemical processes

In this paper, we present a method for the fault detection based on the residual generation. The main idea is to reconstruct the outputs of the system from the measurements using the extended Kalman filter. The estimations are compared to the values of the reference model and so, deviations are interpreted as possible faults. The reference model is simulated by the dynamic hybrid simulator, PrODHyS. The use of this method is illustrated through an application in the field of chemical processe

Integration of a failure monitoring within a hybrid dynamic simulation environment

The complexity and the size of the industrial chemical processes induce the monitoring of a growing number of process variables. Their knowledge is generally based on the measurements of system variables and on the physico-chemical models of the process. Nevertheless this information is imprecise because of process and measurement noise. So the research ways aim at developing new and more powerful techniques for the detection of process fault. In this work, we present a method for the fault detection based on the comparison between the real system and the reference model evolution generated by the extended Kalman filter. The reference model is simulated by the dynamic hybrid simulator, PrODHyS. It is a general object-oriented environment which provides common and reusable components designed for the development and the management of dynamic simulation of industrial systems. The use of this method is illustrated through a didactic example relating to the field of Chemical Process System Engineering

Measurements, Models, Systems and Design

531 s.