With the rapid development of modern control systems, a significant number of industrial systems may suffer from component failures. An accurate yet faster fault prognosis and resilience can improve system availability and reduce unscheduled downtime. Therefore, in this dissertation, model-based prognosis and resilience control schemes have been developed for online prediction and accommodation of faults for distributed parameter systems (DPS). First, a novel fault detection, estimation and prediction framework is introduced utilizing a novel observer for a class of linear DPS with bounded disturbance by modeling the DPS as a set of partial differential equations.
To relax the state measurability in DPS, filters are introduced to redesign the detection observer. Upon detecting a fault, an adaptive term is activated to estimate the multiplicative fault and a tuning law is derived to tune the fault parameter magnitude. Then based on this estimated fault parameter together with its failure limit, time-to-failure (TTF) is derived for prognosis. A novel fault accommodation scheme is developed to handle actuator and sensor faults with boundary measurements. Next, a fault isolation scheme is presented to differentiate actuator, sensor and state faults with a limited number of measurements for a class of linear and nonlinear DPS.
Subsequently, actuator and sensor fault detection and prediction for a class of nonlinear DPS are considered with bounded disturbance by using a Luenberger observer. Finally, a novel resilient control scheme is proposed for nonlinear DPS once an actuator fault is detected by using an additional boundary measurement. In all the above methods, Lyapunov analysis is utilized to show the boundedness of the closed-loop signals during fault detection, prediction and resilience under mild assumptions --Abstract, page iv
