Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Developing a distributed electronic health-record store for India

The DIGHT project is addressing the problem of building a scalable and highly available information store for the Electronic Health Records (EHRs) of the over one billion citizens of India

Engine performance characteristics and evaluation of variation in the length of intake plenum

In the engine with multipoint fuel injection system using electronically controlled fuel injectors has an intake manifold in which only the air flows and, the fuel is injected into the intake valve. Since the intake manifolds transport mainly air, the supercharging effects of the variable length intake plenum will be different from carbureted engine. Engine tests have been carried out with the aim of constituting a base study to design a new variable length intake manifold plenum. The objective in this research is to study the engine performance characteristics and to evaluate the effects of the variation in the length of intake plenum. The engine test bed used for experimental work consists of a control panel, a hydraulic dynamometer and measurement instruments to measure the parameters of engine performance characteristics. The control panel is being used to perform administrative and management operating system. Besides that, the hydraulic dynamometer was used to measure the power of an engine by using a cell filled with liquid to increase its load. Thus, measurement instrument is provided in this test to measure the as brake torque, brake power, thermal efficiency and specific fuel consumption. The results showed that the variation in the plenum length causes an improvement on the engine performance characteristics especially on the fuel consumption at high load and low engine speeds which are put forward the system using for urban roads. From this experiment, it will show the behavior of engine performance

Assembly and Disassembly Planning by using Fuzzy Logic & Genetic Algorithms

The authors propose the implementation of hybrid Fuzzy Logic-Genetic Algorithm (FL-GA) methodology to plan the automatic assembly and disassembly sequence of products. The GA-Fuzzy Logic approach is implemented onto two levels. The first level of hybridization consists of the development of a Fuzzy controller for the parameters of an assembly or disassembly planner based on GAs. This controller acts on mutation probability and crossover rate in order to adapt their values dynamically while the algorithm runs. The second level consists of the identification of theoptimal assembly or disassembly sequence by a Fuzzy function, in order to obtain a closer control of the technological knowledge of the assembly/disassembly process. Two case studies were analyzed in order to test the efficiency of the Fuzzy-GA methodologies

Fully automated urban traffic system

The replacement of the driver with an automatic system which could perform the functions of guiding and routing a vehicle with a human's capability of responding to changing traffic demands was discussed. The problem was divided into four technological areas; guidance, routing, computing, and communications. It was determined that the latter three areas being developed independent of any need for fully automated urban traffic. A guidance system that would meet system requirements was not being developed but was technically feasible

Damage identification in structural health monitoring: a brief review from its implementation to the Use of data-driven applications

The damage identification process provides relevant information about the current state of a structure under inspection, and it can be approached from two different points of view. The first approach uses data-driven algorithms, which are usually associated with the collection of data using sensors. Data are subsequently processed and analyzed. The second approach uses models to analyze information about the structure. In the latter case, the overall performance of the approach is associated with the accuracy of the model and the information that is used to define it. Although both approaches are widely used, data-driven algorithms are preferred in most cases because they afford the ability to analyze data acquired from sensors and to provide a real-time solution for decision making; however, these approaches involve high-performance processors due to the high computational cost. As a contribution to the researchers working with data-driven algorithms and applications, this work presents a brief review of data-driven algorithms for damage identification in structural health-monitoring applications. This review covers damage detection, localization, classification, extension, and prognosis, as well as the development of smart structures. The literature is systematically reviewed according to the natural steps of a structural health-monitoring system. This review also includes information on the types of sensors used as well as on the development of data-driven algorithms for damage identification.Peer ReviewedPostprint (published version

Optimisation of High Reliability Integrated Motor Drives

The development of integrated motor drives (IMDs) with high volumetric power density and reliability are crucial for the continued development and adoption of electric vehicles (EV). The development of the wide bandgap (WBG) devices, especially Silicon Carbide (SiC) MOSFETs, enables new possibilities for traction drive systems. However, to maximise the benefits of SiC, the IMD design process, including passive component selection, control and thermal management should be optimised. This thesis goes through the initial major design steps in SiC power system design, from SiC device analysis and modelling to circuit design and electrothermal simulation of an IMD system. A novel approach to discrete SiC MOSFET selection, using a method of calculating performance based on experimental data, is described. Dynamic behaviour of a family of 1200 V MOSFETs is studied at temperatures up to 175 °C using a double pulse test to show the combined effect of the differences in internal design between MOSFETs with different current ratings. It is observed that the 30 mΩ MOSFET had a 24 % higher switching loss than a 140 mΩ at a 30 A load current. The study then goes on to compare the effect of switching frequency, paralleling of MOSFETs and the device type used to demonstrate the inverter design with the lowest power losses, which will equate to low temperatures and high lifetime. The novel methodology can find the optimal choice of MOSFET from the family, and number required through paralleling, for a circuit when given the load current, temperature and switching. Understanding the device interdependencies in a single family is utilised to also predict the relative performance between SiC MOSFETs from different manufacturers. An axial-flux permanent magnet synchronous motor (PMSM) driven by a three-phase SiC inverter is simulated in PLECS using experimentally validated MOSFET models chosen by the device selection methodology. Electrothermal analysis shows the influence of switching frequency, temperature, MOSFETs paralleling and DC-link capacitance on voltage ripple, total harmonic distortion, efficiency and MOSFET loss and temperature profiles. With a 60 % decrease in THD and 50 % increase in maximum MOSFET junction temperature when switching frequency is increased from 10 to 100 kHz. The high-temperature stress on the semiconductors due to close proximity with the ma- chine stator means reliability is an important consideration that is yet to be fully investigated in IMD optimisations. This study uses a lifetime model specific to the transistor package TO-247 in reliability optimisation for IMD for the first time. It requires detailed MOSFET simulation outputs to provide a highly accurate lifetime for discrete SiC MOSFETs. Both single and multi-objective optimisations of the volume and lifetime of the three- phase inverter are presented. The single objective optimisation demonstrates the minimum volume and the corresponding switching frequency and lifetime when between three and six MOSFETs are paralleled at a temperature range between 50 and 150 °C. Design constraints were set limiting the feasible switching frequency range to between 13 kHz because of THD and 118 kHz because of efficiency limits, corresponding to required DC-link capacitors of 520 and 55 μF respectively. Increases in temperature were found to further limit the maximum switching frequency and therefore increase the minimum volume of the inverter. A Pareto front identifies a range of possible solutions for the volume and lifetime of an inverter with six paralleled MOSFETs through the multi-objective objective procedure. Further analysis of these possible solutions identified a single optimal solution for the system, using a DC-link capacitance of 190 μF at 45 kHz, giving a combined volume of the capacitor and MOSFETs of 440 cm3 and a lifetime of 12,000 hours. Finally, the electrothermal analysis of a dual inverter driving a symmetric six-phase PMSM is presented with the benefits of modular multi-phase systems in IMDs summarised. Effect on performance of lower per-phase current, interleaving strategies and fault tolerance are analysed and compared to equivalent three-phase systems, for 60 kW and 120 kW operation. A novel method for lifetime prediction of systems with paralleled MOSFETs or fault tolerance capabilities considering incremental damage is developed based on TO-247 lifetime calculations from PLECS simulation, and component-level reliability profiles using Monte Carlo analysis. The dual inverter is used to model the system and implements control schemes for both single-phase and single inverter failure while maintaining the 4000 rpm and 140 Nm speed and torque requirements. A twofold increase in B10 lifetime of is observed when the effect of paralleled SiC MOSFETs prevents immediate system failure in a three-phase inverter. A computational fluid dynamics (CFD) and 3D finite element thermal model are designed to study the inverter behaviour based on the thermal analysis of its shared cooling plate with a 300 mm diameter axial flux PMSM. Concentric layout designs minimise the variation of junction temperatures to 5 °C and the effect of the flow rate and temperature of the coolant in the PMSM cold plate is presented between 5 and 30 l/min. The multi-objective optimisation procedure used to compare the dual inverter demonstrated it outperformed the three-phase inverter with 15 % smaller required DC-link capacitance, higher efficiency and increased lifetime in part due to its fault-tolerant nature. The optimal dual inverter considering the design constraints consists of four 40 μF KEMET film capacitors operating with a switching frequency of 46 kHz giving an inverter volume of 300 cm3 and a lifetime of 16.3 years, assuming 1000 hours of operation annually

High-speed civil transport flight- and propulsion-control technological issues

Technology advances required in the flight and propulsion control system disciplines to develop a high speed civil transport (HSCT) are identified. The mission and requirements of the transport and major flight and propulsion control technology issues are discussed. Each issue is ranked and, for each issue, a plan for technology readiness is given. Certain features are unique and dominate control system design. These features include the high temperature environment, large flexible aircraft, control-configured empennage, minimizing control margins, and high availability and excellent maintainability. The failure to resolve most high-priority issues can prevent the transport from achieving its goals. The flow-time for hardware may require stimulus, since market forces may be insufficient to ensure timely production. Flight and propulsion control technology will contribute to takeoff gross weight reduction. Similar technology advances are necessary also to ensure flight safety for the transport. The certification basis of the HSCT must be negotiated between airplane manufacturers and government regulators. Efficient, quality design of the transport will require an integrated set of design tools that support the entire engineering design team