Localization Algorithm with On-line Path Loss Estimation and Node Selection

RSS-based localization is considered a low-complexity algorithm with respect to other range techniques such as TOA or AOA. The accuracy of RSS methods depends on the suitability of the propagation models used for the actual propagation conditions. In indoor environments, in particular, it is very difficult to obtain a good propagation model. For that reason, we present a cooperative localization algorithm that dynamically estimates the path loss exponent by using RSS measurements. Since the energy consumption is a key point in sensor networks, we propose a node selection mechanism to limit the number of neighbours of a given node that are used for positioning purposes. Moreover, the selection mechanism is also useful to discard bad links that could negatively affect the performance accuracy. As a result, we derive a practical solution tailored to the strict requirements of sensor networks in terms of complexity, size and cost. We present results based on both computer simulations and real experiments with the Crossbow MICA2 motes showing that the proposed scheme offers a good trade-off in terms of position accuracy and energy efficiency

A survey of localization in wireless sensor network

Localization is one of the key techniques in wireless sensor network. The location estimation methods can be classified into target/source localization and node self-localization. In target localization, we mainly introduce the energy-based method. Then we investigate the node self-localization methods. Since the widespread adoption of the wireless sensor network, the localization methods are different in various applications. And there are several challenges in some special scenarios. In this paper, we present a comprehensive survey of these challenges: localization in non-line-of-sight, node selection criteria for localization in energy-constrained network, scheduling the sensor node to optimize the tradeoff between localization performance and energy consumption, cooperative node localization, and localization algorithm in heterogeneous network. Finally, we introduce the evaluation criteria for localization in wireless sensor network

Distributed Local Linear Parameter Estimation using Gaussian SPAWN

We consider the problem of estimating local sensor parameters, where the local parameters and sensor observations are related through linear stochastic models. Sensors exchange messages and cooperate with each other to estimate their own local parameters iteratively. We study the Gaussian Sum-Product Algorithm over a Wireless Network (gSPAWN) procedure, which is based on belief propagation, but uses fixed size broadcast messages at each sensor instead. Compared with the popular diffusion strategies for performing network parameter estimation, whose communication cost at each sensor increases with increasing network density, the gSPAWN algorithm allows sensors to broadcast a message whose size does not depend on the network size or density, making it more suitable for applications in wireless sensor networks. We show that the gSPAWN algorithm converges in mean and has mean-square stability under some technical sufficient conditions, and we describe an application of the gSPAWN algorithm to a network localization problem in non-line-of-sight environments. Numerical results suggest that gSPAWN converges much faster in general than the diffusion method, and has lower communication costs, with comparable root mean square errors

Reference Nodes Selection for Anchor-Free Localization in Wireless Sensor Networks

Dizertační práce se zabývá návrhem nového bezkotevního lokalizačního algoritmu sloužícího pro výpočet pozice uzlů v bezdrátových senzorových sítích. Provedené studie ukázaly, že dosavadní bezkotevní lokalizační algoritmy, pracující v paralelním režimu, dosahují malých lokalizačních chyb. Jejich nevýhodou ovšem je, že při sestavení množiny referenčních uzlu spotřebovávají daleko větší množství energie než algoritmy pracující v inkrementálním režimu. Paralelní lokalizační algoritmy využívají pro určení pozice referenční uzly nacházející se na protilehlých hranách bezdrátové sítě. Nový lokalizační algoritmus označený jako BRL (Boundary Recognition aided Localization) je založen na myšlence decentralizovaně detekovat uzly ležící na hranici síti a pouze z této množiny vybrat potřebný počet referenčních uzlu. Pomocí navrženého přístupu lze znažně snížit množství energie spotřebované v průběhu procesu výběru referenčních uzlů v senzorovém poli. Dalším přínosem ke snížení energetických nároku a zároveň zachování nízké lokalizační chyby je využití procesu multilaterace se třemi, eventuálně čtyřmi referenčními body. V rámci práce byly provedeny simulace několika dílčích algoritmu a jejich funkčnost byla ověřena experimentálně v reálné senzorové síti. Navržený algoritmus BRL byl porovnán z hlediska lokalizační chyby a počtu zpracovaných paketů s několika známými lokalizačními algoritmy. Výsledky simulací dokázaly, že navržený algoritmus představuje efektivní řešení pro přesnou a zároveň nízkoenergetickou lokalizaci uzlů v bezdrátových senzorových sítích.The doctoral thesis is focused on a design of a novel anchor free localization algorithm for wireless sensor networks. As introduction, the incremental and concurrent anchor free localization algorithms are presented and their performance is compared. It was found that contemporary anchor free localization algorithms working in the concurrent manner achieve a low localization error, but dissipate signicant energy reserves. A new Boundary Recognition Aided Localization algorithm presented in this thesis is based on an idea to recognize the nodes placed on the boundary of network and thus reduce the number of transmission realized during the reference nodes selection phase of the algorithm. For the position estimation, the algorithm employs the multilateration technique that work eectively with the low number of the reference nodes. Proposed algorithms are tested through the simulations and validated by the real experiment with the wireless sensor network. The novel Boundary Recognition Aided Localization algorithm is compared with the known algorithms in terms of localization error and the communication cost. The results show that the novel algorithm presents powerful solution for the anchor free localization.

An indoor variance-based localization technique utilizing the UWB estimation of geometrical propagation parameters

A novel localization framework is presented based on ultra-wideband (UWB) channel sounding, employing a triangulation method using the geometrical properties of propagation paths, such as time delay of arrival, angle of departure, angle of arrival, and their estimated variances. In order to extract these parameters from the UWB sounding data, an extension to the high-resolution RiMAX algorithm was developed, facilitating the analysis of these frequency-dependent multipath parameters. This framework was then tested by performing indoor measurements with a vector network analyzer and virtual antenna arrays. The estimated means and variances of these geometrical parameters were utilized to generate multiple sample sets of input values for our localization framework. Next to that, we consider the existence of multiple possible target locations, which were subsequently clustered using a Kim-Parks algorithm, resulting in a more robust estimation of each target node. Measurements reveal that our newly proposed technique achieves an average accuracy of 0.26, 0.28, and 0.90 m in line-of-sight (LoS), obstructed-LoS, and non-LoS scenarios, respectively, and this with only one single beacon node. Moreover, utilizing the estimated variances of the multipath parameters proved to enhance the location estimation significantly compared to only utilizing their estimated mean values