Performance Gains of Optimal Antenna Deployment for Massive MIMO Systems

We consider the uplink of a single-cell multi-user multiple-input multiple-output (MIMO) system with several single antenna transmitters/users and one base station with $N$ antennas in the $N\rightarrow\infty$ regime. The base station antennas are evenly distributed to $n$ admissable locations throughout the cell. First, we show that a reliable (per-user) rate of $O(\log n)$ is achievable through optimal locational optimization of base station antennas. We also prove that an $O(\log n)$ rate is the best possible. Therefore, in contrast to a centralized or circular deployment, where the achievable rate is at most a constant, the rate with a general deployment can grow logarithmically with $n$, resulting in a certain form of "macromultiplexing gain." Second, using tools from high-resolution quantization theory, we derive an accurate formula for the best achievable rate given any $n$ and any user density function. According to our formula, the dependence of the optimal rate on the user density function $f$ is curiously only through the differential entropy of $f$. In fact, the optimal rate decreases linearly with the differential entropy, and the worst-case scenario is a uniform user density. Numerical simulations confirm our analytical findings.Comment: GLOBECOM 201

The Necessity of Relay Selection

We determine necessary conditions on the structure of symbol error rate (SER) optimal quantizers for limited feedback beamforming in wireless networks with one transmitter-receiver pair and R parallel amplify-and-forward relays. We call a quantizer codebook "small" if its cardinality is less than R, and "large" otherwise. A "d-codebook" depends on the power constraints and can be optimized accordingly, while an "i-codebook" remains fixed. It was previously shown that any i-codebook that contains the single-relay selection (SRS) codebook achieves the full-diversity order, R. We prove the following: Every full-diversity i-codebook contains the SRS codebook, and thus is necessarily large. In general, as the power constraints grow to infinity, the limit of an optimal large d-codebook contains an SRS codebook, provided that it exists. For small codebooks, the maximal diversity is equal to the codebook cardinality. Every diversity-optimal small i-codebook is an orthogonal multiple-relay selection (OMRS) codebook. Moreover, the limit of an optimal small d-codebook is an OMRS codebook. We observe that SRS is nothing but a special case of OMRS for codebooks with cardinality equal to R. As a result, we call OMRS as "the universal necessary condition" for codebook optimality. Finally, we confirm our analytical findings through simulations.Comment: 29 pages, 4 figure

Distributed Beamforming in Wireless Multiuser Relay-Interference Networks with Quantized Feedback

We study quantized beamforming in wireless amplify-and-forward relay-interference networks with any number of transmitters, relays, and receivers. We design the quantizer of the channel state information to minimize the probability that at least one receiver incorrectly decodes its desired symbol(s). Correspondingly, we introduce a generalized diversity measure that encapsulates the conventional one as the first-order diversity. Additionally, it incorporates the second-order diversity, which is concerned with the transmitter power dependent logarithmic terms that appear in the error rate expression. First, we show that, regardless of the quantizer and the amount of feedback that is used, the relay-interference network suffers a second-order diversity loss compared to interference-free networks. Then, two different quantization schemes are studied: First, using a global quantizer, we show that a simple relay selection scheme can achieve maximal diversity. Then, using the localization method, we construct both fixed-length and variable-length local (distributed) quantizers (fLQs and vLQs). Our fLQs achieve maximal first-order diversity, whereas our vLQs achieve maximal diversity. Moreover, we show that all the promised diversity and array gains can be obtained with arbitrarily low feedback rates when the transmitter powers are sufficiently large. Finally, we confirm our analytical findings through simulations.Comment: 41 pages, 14 figures, submitted to IEEE Transactions on Information Theory, July 2010. This work was presented in part at IEEE Global Communications Conference (GLOBECOM), Nov. 200

Very Low-Rate Variable-Length Channel Quantization for Minimum Outage Probability

We identify a practical vector quantizer design problem where any fixed-length quantizer (FLQ) yields non-zero distortion at any finite rate, while there is a variable-length quantizer (VLQ) that can achieve zero distortion with arbitrarily low rate. The problem arises in a $t \times 1$ multiple-antenna fading channel where we would like to minimize the channel outage probability by employing beamforming via quantized channel state information at the transmitter (CSIT). It is well-known that in such a scenario, finite-rate FLQs cannot achieve the full-CSIT (zero distortion) outage performance. We construct VLQs that can achieve the full-CSIT performance with finite rate. In particular, with $P$ denoting the power constraint of the transmitter, we show that the necessary and sufficient VLQ rate that guarantees the full-CSIT performance is $\Theta(1/P)$. We also discuss several extensions (e.g. to precoding) of this result

Energy Efficiency in Two-Tiered Wireless Sensor Networks

We study a two-tiered wireless sensor network (WSN) consisting of $N$ access points (APs) and $M$ base stations (BSs). The sensing data, which is distributed on the sensing field according to a density function $f$, is first transmitted to the APs and then forwarded to the BSs. Our goal is to find an optimal deployment of APs and BSs to minimize the average weighted total, or Lagrangian, of sensor and AP powers. For $M=1$, we show that the optimal deployment of APs is simply a linear transformation of the optimal $N$-level quantizer for density $f$, and the sole BS should be located at the geometric centroid of the sensing field. Also, for a one-dimensional network and uniform $f$, we determine the optimal deployment of APs and BSs for any $N$ and $M$. Moreover, to numerically optimize node deployment for general scenarios, we propose one- and two-tiered Lloyd algorithms and analyze their convergence properties. Simulation results show that, when compared to random deployment, our algorithms can save up to 79\% of the power on average.Comment: 11 pages, 7 figure

Optical wireless communication based indoor positioning algorithms: performance optimisation and mathematical modelling

In this paper, the performance of the optimal beam radius indoor positioning (OBRIP) and two-receiver indoor positioning (TRIP) algorithms are analysed by varying system parameters in the presence of an indoor optical wireless channel modelled in line of sight configuration. From all the conducted simulations, the minimum average error value obtained for TRIP is 0.61 m against 0.81 m obtained for OBRIP for room dimensions of 10 m × 10 m × 3 m. In addition, for each simulated condition, TRIP, which uses two receivers, outperforms OBRIP and reduces position estimation error up to 30%. To get a better understanding of error in position estimation for different combinations of beam radius and separation between light emitting diodes, the 90th percentile error is determined using a cumulative distribution frequency (CDF) plot, which gives an error value of 0.94 m for TRIP as compared to 1.20 m obtained for OBRIP. Both algorithms also prove to be robust towards change in receiver tilting angle, thus providing flexibility in the selection of the parameters to adapt to any indoor environment. In addition, in this paper, a mathematical model based on the concept of raw moments is used to confirm the findings of the simulation results for the proposed algorithms. Using this mathematical model, closed-form expressions are derived for standard deviation of uniformly distributed points in an optical wireless communication based indoor positioning system with circular and rectangular beam shapes

Distributed Channel Quantization for Two-User Interference Networks

We introduce conferencing-based distributed channel quantizers for two-user interference networks where interference signals are treated as noise. Compared with the conventional distributed quantizers where each receiver quantizes its own channel independently, the proposed quantizers allow multiple rounds of feedback communication in the form of conferencing between receivers. We take the network outage probabilities of sum rate and minimum rate as performance measures and consider quantizer design in the transmission strategies of time sharing and interference transmission. First, we propose distributed quantizers that achieve the optimal network outage probability of sum rate for both time sharing and interference transmission strategies with an average feedback rate of only two bits per channel state. Then, for the time sharing strategy, we propose a distributed quantizer that achieves the optimal network outage probability of minimum rate with finite average feedback rate; conventional quantizers require infinite rate to achieve the same performance. For the interference transmission strategy, a distributed quantizer that can approach the optimal network outage probability of minimum rate closely is also proposed. Numerical simulations confirm that our distributed quantizers based on conferencing outperform the conventional ones.Comment: 30 pages, 4 figure