2,948 research outputs found
Kappa Coefficients for Circular Classifications
Circular classifications are classification scales with categories that exhibit a certain periodicity. Since linear scales have endpoints, the standard weighted kappas used for linear scales are not appropriate for analyzing agreement between two circular classifications. A family of kappa coefficients for circular classifications is defined. The kappas differ only in one parameter. It is studied how the circular kappas are related and if the values of the circular kappas depend on the number of categories. It turns out that the values of the circular kappas can be strictly ordered in precisely two ways. The orderings suggest that the circular kappas are measuring the same thing, but to a different extent. If one accepts the use of magnitude guidelines, it is recommended to use stricter criteria for circular kappas that tend to produce higher values
Kappa coefficients for dichotomous-nominal classifications
Two types of nominal classifications are distinguished, namely regular nominal classifications and dichotomous-nominal classifications. The first type does not include an 'absence' category (for example, no disorder), whereas the second type does include an 'absence' category. Cohen's unweighted kappa can be used to quantify agreement between two regular nominal classifications with the same categories, but there are no coefficients for assessing agreement between two dichotomous-nominal classifications. Kappa coefficients for dichotomous-nominal classifications with identical categories are defined. All coefficients proposed belong to a one-parameter family. It is studied how the coefficients for dichotomous-nominal classifications are related and if the values of the coefficients depend on the number of categories. It turns out that the values of the new kappa coefficients can be strictly ordered in precisely two ways. The orderings suggest that the new coefficients are measuring the same thing, but to a different extent. If one accepts the use of magnitude guidelines, it is recommended to use stricter criteria for the new coefficients that tend to produce higher values
Multiscale Object-Based Classification and Feature Extraction along Arctic Coasts
Permafrost coasts are experiencing accelerated erosion in response to above average warming in the Arctic resulting in local, regional, and global consequences. However, Arctic coasts are expansive in scale, constituting 30–34% of Earth’s coastline, and represent a particular challenge for wide-scale, high temporal measurement and monitoring. This study addresses the potential strengths and limitations of an object-based approach to integrate with an automated workflow by assessing the accuracy of coastal classifications and subsequent feature extraction of coastal indicator features. We tested three object-based classifications; thresholding, supervised, and a deep learning model using convolutional neural networks, focusing on a Pleaides satellite scene in the Western Canadian Arctic. Multiple spatial resolutions (0.6, 1, 2.5, 5, 10, and 30 m/pixel) and segmentation scales (100, 200, 300, 400, 500, 600, 700, and 800) were tested to understand the wider applicability across imaging platforms. We achieved classification accuracies greater than 85% for the higher image resolution scenarios using all classification methods. Coastal features, waterline and tundra, or vegetation, line, generated from image classifications were found to be within the image uncertainty 60% of the time when compared to reference features. Further, for very high resolution scenarios, segmentation scale did not affect classification accuracy; however, a smaller segmentation scale (i.e., smaller image objects) led to improved feature extraction. Similar results were generated across classification approaches with a slight improvement observed when using deep learning CNN, which we also suggest has wider applicability. Overall, our study provides a promising contribution towards broad scale monitoring of Arctic coastal erosion.info:eu-repo/semantics/publishedVersio
On the added value of quad-pol data in a multi-temporal crop classification framework based on RADARSAT-2 imagery
Polarimetric SAR images are a rich data source for crop mapping. However, quad-pol
sensors have some limitations due to their complexity, increased data rate, and reduced coverage
and revisit time. The main objective of this study was to evaluate the added value of quad-pol
data in a multi-temporal crop classification framework based on SAR imagery. With this aim, three
RADARSAT-2 scenes were acquired between May and June 2010. Once we analyzed the separability
and the descriptive analysis of the features, an object-based supervised classification was performed
using the Random Forests classification algorithm. Classification results obtained with dual-pol
(VV-VH) data as input were compared to those using quad-pol data in different polarization bases
(linear H-V, circular, and linear 45º), and also to configurations where several polarimetric features
(Pauli and Cloude–Pottier decomposition features and co-pol coherence and phase difference) were
added. Dual-pol data obtained satisfactory results, equal to those obtained with quad-pol data
(in H-V basis) in terms of overall accuracy (0.79) and Kappa values (0.69). Quad-pol data in circular
and linear 45º bases resulted in lower accuracies. The inclusion of polarimetric features, particularly
co-pol coherence and phase difference, resulted in enhanced classification accuracies with an overall
accuracy of 0.86 and Kappa of 0.79 in the best case, when all the polarimetric features were added.
Improvements were also observed in the identification of some particular crops, but major crops like
cereals, rapeseed, and sunflower already achieved a satisfactory accuracy with the VV-VH dual-pol
configuration and obtained only minor improvements. Therefore, it can be concluded that C-band
VV-VH dual-pol data is almost ready to be used operationally for crop mapping as long as at least
three acquisitions in dates reflecting key growth stages representing typical phenology differences of
the present crops are available. In the near future, issues regarding the classification of crops with
small field sizes and heterogeneous cover (i.e., fallow and grasslands) need to be tackled to make this
application fully operational
A Comparative Analysis of Phytovolume Estimation Methods Based on UAV-Photogrammetry and Multispectral Imagery in a Mediterranean Forest
Management and control operations are crucial for preventing forest fires, especially in Mediterranean forest areas with dry climatic periods. One of them is prescribed fires, in which the biomass fuel present in the controlled plot area must be accurately estimated. The most used methods for estimating biomass are time-consuming and demand too much manpower. Unmanned aerial vehicles (UAVs) carrying multispectral sensors can be used to carry out accurate indirect measurements of terrain and vegetation morphology and their radiometric characteristics. Based on the UAV-photogrammetric project products, four estimators of phytovolume were compared in a Mediterranean forest area, all obtained using the difference between a digital surface model (DSM) and a digital terrain model (DTM). The DSM was derived from a UAV-photogrammetric project based on the structure from a motion algorithm. Four different methods for obtaining a DTM were used based on an unclassified dense point cloud produced through a UAV-photogrammetric project (FFU), an unsupervised classified dense point cloud (FFC), a multispectral vegetation index (FMI), and a cloth simulation filter (FCS). Qualitative and quantitative comparisons determined the ability of the phytovolume estimators for vegetation detection and occupied volume. The results show that there are no significant differences in surface vegetation detection between all the pairwise possible comparisons of the four estimators at a 95% confidence level, but FMI presented the best kappa value (0.678) in an error matrix analysis with reference data obtained from photointerpretation and supervised classification. Concerning the accuracy of phytovolume estimation, only FFU and FFC presented differences higher than two standard deviations in a pairwise comparison, and FMI presented the best RMSE (12.3 m) when the estimators were compared to 768 observed data points grouped in four 500 m2 sample plots. The FMI was the best phytovolume estimator of the four compared for low vegetation height in a Mediterranean forest. The use of FMI based on UAV data provides accurate phytovolume estimations that can be applied on several environment management activities, including wildfire prevention. Multitemporal phytovolume estimations based on FMI could help to model the forest resources evolution in a very realistic way
Recommended from our members
Assessment of Vessel Density on Non-Contrast Computed Tomography to Detect Basilar Artery Occlusion
Introduction: Basilar artery occlusion (BAO) may be clinically occult due to variable and non-specific symptomatology. We evaluated the qualitative and quantitative determination of a hyperdense basilar artery (HDBA) on non-contrast computed tomography (NCCT) brain for the diagnosis of BAO.Methods: We conducted a case control study of patients with confirmed acute BAO vs a control group of suspected acute stroke patients without BAO. Two EM attending physicians, one third-year EM resident, and one medical student performed qualitative and quantitative assessments for the presence of a HDBA on axial NCCT images. Our primary outcome measures were sensitivity and specificity for BAO. Our secondary outcomes were inter-rater and intra-rater reliability of the qualitative and quantitative assessments.Results: We included 60 BAO and 65 control patients in our analysis. Qualitative assessment of the hyperdense basilar artery sign was poorly sensitive (54%–72%) and specific (55%–89%). Quantitative measurement improved the specificity of hyperdense basilar artery assessment for diagnosing BAO, with a threshold of 61.0–63.8 Hounsfield units demonstrating relatively high specificity of 85%–94%. There was moderate inter-rater agreement for the qualitative assessment of HDBA (Fleiss’ kappa statistic 0.508, 95% confidence interval: 0.435–0.581). Agreement improved for quantitative assessments, but still fell in the moderate range (Shrout-Fleiss intraclass correlation coefficient: 0.635). Intra-rater reliability for the quantitative assessments of the two attending physician reviewers demonstrated substantial consistency.Conclusion: Our results highlight the importance of carefully examining basilar artery density when interpreting the NCCT of patients with altered consciousness or other signs and symptoms concerning for an acute basilar artery occlusion. If the Hounsfield unit density of the basilar artery exceeds 61 Hounsfield units, BAO should be highly suspected
Assessing Synthetic Aperture Radar (SAR)-Derived Temporal Patterns and Digital Terrain Data for Palustrine Wetland Mapping
Palustrine wetland systems are important ecosystems and provide numerous ecosystems services to support society. Unfortunately, they remain under constant threat of devastation due to land use practices and global climate change, which underscores the need to identify, map, and monitor these landscape features. This study explores harmonic coefficients and seasonal median values derived from Sentinel-1 synthetic aperture radar (SAR) data, as well as digital elevation model (DEM)-derived terrain variables, to predict palustrine wetland locations in the Vermont counties of Bennington, Chittenden, and Essex. Support vector machine (SVM) and random forest (RF) machine learning models were used with various combinations of the three datasets: terrain, SAR seasonal medians, and SAR harmonic time series coefficients. For Bennington County, using the harmonic and terrain data with a RF model yielded the most accurate results, with an overall accuracy of 76%. The terrain data alone and RF model produced the highest overall accuracy in Chittenden County with an accuracy of 85%. In Essex County any combination of the three datasets and the RF model yielded the highest overall accuracy of 81%. Generally, this study documented better performance using the RF algorithm in comparison to SVM. Terrain variables were generally important for differentiating wetlands from uplands and waterbodies. However, Sentinel-1 data, represented as harmonic regression coefficients and seasonal medians, provided limited predictive power. Although Sentinel-1 SAR data were of limited value in the explored case studies, findings may not extrapolate to other SAR datasets using different polarizations, wavelengths, and/or spatial resolutions
- …