Residue Number System Based Building Blocks for Applications in Digital Signal Processing

Předkládaná disertační práce se zabývá návrhem základních bloků v systému zbytkových tříd pro zvýšení výkonu aplikací určených pro digitální zpracování signálů (DSP). Systém zbytkových tříd (RNS) je neváhová číselná soustava, jež umožňuje provádět paralelizovatelné, vysokorychlostní, bezpečné a proti chybám odolné aritmetické operace, které jsou zpracovávány bez přenosu mezi řády. Tyto vlastnosti jej činí značně perspektivním pro použití v DSP aplikacích náročných na výpočetní výkon a odolných proti chybám. Typický RNS systém se skládá ze tří hlavních částí: převodníku z binárního kódu do RNS, který počítá ekvivalent vstupních binárních hodnot v systému zbytkových tříd, dále jsou to paralelně řazené RNS aritmetické jednotky, které provádějí aritmetické operace s operandy již převedenými do RNS. Poslední část pak tvoří převodník z RNS do binárního kódu, který převádí výsledek zpět do výchozího binárního kódu. Hlavním cílem této disertační práce bylo navrhnout nové struktury základních bloků výše zmiňovaného systému zbytkových tříd, které mohou být využity v aplikacích DSP. Tato disertační práce předkládá zlepšení a návrhy nových struktur komponent RNS, simulaci a také ověření jejich funkčnosti prostřednictvím implementace v obvodech FPGA. Kromě návrhů nové struktury základních komponentů RNS je prezentován také podrobný výzkum různých sad modulů, který je srovnává a determinuje nejefektivnější sadu pro různé dynamické rozsahy. Dalším z klíčových přínosů disertační práce je objevení a ověření podmínky určující výběr optimální sady modulů, která umožňuje zvýšit výkonnost aplikací DSP. Dále byla navržena aplikace pro zpracování obrazu využívající RNS, která má vůči klasické binární implementanci nižší spotřebu a vyšší maximální pracovní frekvenci. V závěru práce byla vyhodnocena hlavní kritéria při rozhodování, zda je vhodnější pro danou aplikaci využít binární číselnou soustavu nebo RNS.This doctoral thesis deals with designing residue number system based building blocks to enhance the performance of digital signal processing applications. The residue number system (RNS) is a non-weighted number system that provides carry-free, parallel, high speed, secure and fault tolerant arithmetic operations. These features make it very attractive to be used in high-performance and fault tolerant digital signal processing (DSP) applications. A typical RNS system consists of three main components; the first one is the binary to residue converter that computes the RNS equivalent of the inputs represented in the binary number system. The second component in this system is parallel residue arithmetic units that perform arithmetic operations on the operands already represented in RNS. The last component is the residue to binary converter, which converts the outputs back into their binary representation. The main aim of this thesis was to propose novel structures of the basic components of this system in order to be later used as fundamental units in DSP applications. This thesis encloses improving and designing novel structures of these components, simulating and verifying their efficiency via FPGA implementation. In addition to suggesting novel structures of basic RNS components, a detailed study on different moduli sets that compares and determines the most efficient one for different dynamic range requirements is also presented. One of the main outcomes of this thesis is concluding and verifying the main condition that should be met when choosing a moduli set, in order to improve the timing performance of a DSP application. An RNS-based image processing application is also proposed. Its efficiency, in terms of timing performance and power consumption, is proved via comparing it with a binary-based one. Finally, the main considerations that should be taken into account when choosing to use the binary number system or RNS are also discussed in details.

SIM-DSP: A DSP-Enhanced CAD Platform for Signal Integrity Macromodeling and Simulation

Macromodeling-Simulation process for signal integrity verifications has become necessary for the high speed circuit system design. This paper aims to introduce a “VLSI Signal Integrity Macromodeling and Simulation via Digital Signal Processing Techniques” framework (known as SIM-DSP framework), which applies digital signal processing techniques to facilitate the SI verification process in the pre-layout design phase. Core identification modules and peripheral (pre-/post-)processing modules have been developed and assembled to form a verification flow. In particular, a single-step discrete cosine transform truncation (DCTT) module has been developed for modeling-simulation process. In DCTT, the response modeling problem is classified as a signal compression problem, wherein the system response can be represented by a truncated set of non-pole based DCT bases, and error can be analyzed through Parseval’s theorem. Practical examples are given to show the applicability of our proposed framework

GARFIELD + RCo Digital Upgrade: a Modern Set-up for Mass and Charge Identification of Heavy Ion Reaction Products

An upgraded GARFIELD + Ring Counter (RCo) apparatus is presented with improved performances as far as electronics and detectors are concerned. On one side fast sampling digital read out has been extended to all detectors, allowing for an important simplification of the signal processing chain together with an enriched extracted information. On the other side a relevant improvement has been made in the forward part of the setup (RCo): an increased granularity of the CsI(Tl) crystals and a higher homogeneity in the silicon detector resistivity. The renewed performances of the GARFIELD + RCo array make it suitable for nuclear reaction measurements both with stable and with Radioactive Ion Beams (RIB), like the ones foreseen for the SPES facility, where the Physics of Isospin can be studied.Comment: 13 pages, 19 figures - paper submitted to Eur. Phys. J.

Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast

New VLSI design of a MAP/BCJR decoder.

Any communication channel suffers from different kinds of noises. By employing forward error correction (FEC) techniques, the reliability of the communication channel can be increased. One of the emerging FEC methods is turbo coding (iterative coding), which employs soft input soft output (SISO) decoding algorithms like maximum a posteriori (MAP) algorithm in its constituent decoders. In this thesis we introduce a design with lower complexity and less than 0.1dB performance loss compare to the best performance observed in Max-Log-MAP algorithm. A parallel and pipeline design of a MAP decoder suitable for ASIC (Application Specific Integrated Circuits) is used to increase the throughput of the chip. The branch metric calculation unit is studied in detail and a new design with lower complexity is proposed. The design is also flexible to communication block sizes, which makes it ideal for variable frame length communication systems. A new even-spaced quantization technique for the proposed MAP decoder is utilized. Normalization techniques are studied and a suitable technique for the Max-Log-MAP decoder is explained. The decoder chip is synthesized and implemented in a 0.18 mum six-layer metal CMOS technology. (Abstract shortened by UMI.)Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .S23. Source: Masters Abstracts International, Volume: 43-05, page: 1783. Adviser: Majid Ahmadi. Thesis (M.A.Sc.)--University of Windsor (Canada), 2004

Identification of natural frequency components of articulated flexible structures

M.S.Wayne J. Boo

High-Performance VLSI Architectures for Lattice-Based Cryptography

Lattice-based cryptography is a cryptographic primitive built upon the hard problems on point lattices. Cryptosystems relying on lattice-based cryptography have attracted huge attention in the last decade since they have post-quantum-resistant security and the remarkable construction of the algorithm. In particular, homomorphic encryption (HE) and post-quantum cryptography (PQC) are the two main applications of lattice-based cryptography. Meanwhile, the efficient hardware implementations for these advanced cryptography schemes are demanding to achieve a high-performance implementation. This dissertation aims to investigate the novel and high-performance very large-scale integration (VLSI) architectures for lattice-based cryptography, including the HE and PQC schemes. This dissertation first presents different architectures for the number-theoretic transform (NTT)-based polynomial multiplication, one of the crucial parts of the fundamental arithmetic for lattice-based HE and PQC schemes. Then a high-speed modular integer multiplier is proposed, particularly for lattice-based cryptography. In addition, a novel modular polynomial multiplier is presented to exploit the fast finite impulse response (FIR) filter architecture to reduce the computational complexity of the schoolbook modular polynomial multiplication for lattice-based PQC scheme. Afterward, an NTT and Chinese remainder theorem (CRT)-based high-speed modular polynomial multiplier is presented for HE schemes whose moduli are large integers

Number Systems for Deep Neural Network Architectures: A Survey

Deep neural networks (DNNs) have become an enabling component for a myriad of artificial intelligence applications. DNNs have shown sometimes superior performance, even compared to humans, in cases such as self-driving, health applications, etc. Because of their computational complexity, deploying DNNs in resource-constrained devices still faces many challenges related to computing complexity, energy efficiency, latency, and cost. To this end, several research directions are being pursued by both academia and industry to accelerate and efficiently implement DNNs. One important direction is determining the appropriate data representation for the massive amount of data involved in DNN processing. Using conventional number systems has been found to be sub-optimal for DNNs. Alternatively, a great body of research focuses on exploring suitable number systems. This article aims to provide a comprehensive survey and discussion about alternative number systems for more efficient representations of DNN data. Various number systems (conventional/unconventional) exploited for DNNs are discussed. The impact of these number systems on the performance and hardware design of DNNs is considered. In addition, this paper highlights the challenges associated with each number system and various solutions that are proposed for addressing them. The reader will be able to understand the importance of an efficient number system for DNN, learn about the widely used number systems for DNN, understand the trade-offs between various number systems, and consider various design aspects that affect the impact of number systems on DNN performance. In addition, the recent trends and related research opportunities will be highlightedComment: 28 page