55,853 research outputs found
Sensor fault detection with low computational cost : a proposed neural network-based control scheme
The paper describes a low computational power method for detecting sensor faults. A typical fault detection unit for multiple sensor fault detection with modelbased approaches, requires a bank of estimators. The estimators can be either observer or artificial intelligence based. The proposed control scheme uses an artificial intelligence approach for the development of the fault detection unit abbreviated as ‘i-FD’. In contrast with the bank-estimators approach the proposed i-FD unit is using only one estimator for multiple sensor fault detection. The efficacy of the scheme is tested on an Electro-Magnetic Suspension (EMS) system and compared with a bank of Kalman estimators in simulation environment
Robust Fault Detection of Switched Linear Systems with State Delays
This correspondence deals with the problem of robust fault detection for discrete-time switched systems with state delays under an arbitrary switching signal. The fault detection filter is used as the residual generator, in which the filter parameters are dependent on the system mode. Attention is focused on designing the robust fault detection filter such that, for unknown inputs, control inputs, and model uncertainties, the estimation error between the residuals and faults is minimized. The problem of robust fault detection is converted into an H infin-filtering problem. By a switched Lyapunov functional approach, a sufficient condition for the solvability of this problem is established in terms of linear matrix inequalities. A numerical example is provided to demonstrate the effectiveness of the proposed method
Case study: Bio-inspired self-adaptive strategy for spike-based PID controller
A key requirement for modern large scale
neuromorphic systems is the ability to detect and diagnose faults
and to explore self-correction strategies. In particular, to perform
this under area-constraints which meet scalability requirements
of large neuromorphic systems. A bio-inspired online fault
detection and self-correction mechanism for neuro-inspired PID
controllers is presented in this paper. This strategy employs a
fault detection unit for online testing of the PID controller; uses a
fault detection manager to perform the detection procedure
across multiple controllers, and a controller selection mechanism
to select an available fault-free controller to provide a corrective
step in restoring system functionality. The novelty of the
proposed work is that the fault detection method, using synapse
models with excitatory and inhibitory responses, is applied to a
robotic spike-based PID controller. The results are presented for
robotic motor controllers and show that the proposed bioinspired
self-detection and self-correction strategy can detect
faults and re-allocate resources to restore the controller’s
functionality. In particular, the case study demonstrates the
compactness (~1.4% area overhead) of the fault detection
mechanism for large scale robotic controllers.Ministerio de Economía y Competitividad TEC2012-37868-C04-0
Teaching old sensors New tricks: archetypes of intelligence
In this paper a generic intelligent sensor software architecture is described which builds upon the basic requirements of related industry standards (IEEE 1451 and SEVA BS- 7986). It incorporates specific functionalities such as real-time fault detection, drift compensation, adaptation to environmental changes and autonomous reconfiguration. The modular based structure of the intelligent sensor architecture provides enhanced flexibility in regard to the choice of specific algorithmic realizations. In this context, the particular aspects of fault detection and drift estimation are discussed. A mixed indicative/corrective fault detection approach is proposed while it is demonstrated that reversible/irreversible state dependent drift can be estimated using generic algorithms such as the EKF or on-line density estimators. Finally, a parsimonious density estimator is presented and validated through simulated and real data for use in an operating regime dependent fault detection framework
On two variations of identifying codes
Identifying codes have been introduced in 1998 to model fault-detection in
multiprocessor systems. In this paper, we introduce two variations of
identifying codes: weak codes and light codes. They correspond to
fault-detection by successive rounds. We give exact bounds for those two
definitions for the family of cycles
Zonotopic fault detection observer design for Takagi–Sugeno fuzzy systems
This paper considers zonotopic fault detection observer design in the finite-frequency domain for discrete-time Takagi–Sugeno fuzzy systems with unknown but bounded disturbances and measurement noise. We present a novel fault detection observer structure, which is more general than the commonly used Luenberger form. To make the generated residual sensitive to faults and robust against disturbances, we develop a finite-frequency fault detection observer based on generalised Kalman–Yakubovich–Popov lemma and P-radius criterion. The design conditions are expressed in terms of linear matrix inequalities. The major merit of the proposed method is that residual evaluation can be easily implemented via zonotopic approach. Numerical examples are conducted to demonstrate the proposed methodPeer ReviewedPostprint (author's final draft
The Soviet Viewpoint on Nuclear Weapons in International Law
A flexible, model based fault detection and isolation (FDI) system for an arbitrary configuration of a water tank world has been designed and implemented in MATLAB, SIMULINK and dSPACE. The fault detection is performed with local change detection algorithms, and the fault isolation is performed with residual patterns automatically generated from the total configuration
Robust fault detection for networked systems with communication delay and data missing
n this paper, the robust fault detection problem is investigated for a class of discrete-time networked systems with unknown input and multiple state delays. A novel measurement model is utilized to represent both the random measurement delays and the stochastic data missing phenomenon, which typically result from the limited capacity of the communication networks. The network status is assumed to vary in a Markovian fashion and its transition probability matrix is uncertain but resides in a known convex set of a polytopic type. The main purpose of this paper is to design a robust fault detection filter such that, for all unknown inputs, possible parameter uncertainties and incomplete measurements, the error between the residual signal and the fault signal is made as small as possible. By casting the addressed robust fault detection problem into an auxiliary robust H∞ filtering problem of a certain Markovian jumping system, a sufficient condition for the existence of the desired robust fault detection filter is established in terms of linear matrix inequalities. A numerical example is provided to illustrate the effectiveness and applicability of the proposed technique
On design of quantized fault detection filters with randomly occurring nonlinearities and mixed time-delays
This paper is concerned with the fault detection problem for a class of discrete-time systems with randomly occurring nonlinearities, mixed stochastic time-delays as well as measurement quantizations. The nonlinearities are assumed to occur in a random way. The mixed time-delays comprise both the multiple discrete time-delays and the infinite distributed delays that occur in a random way as well. A sequence of stochastic variables is introduced to govern the random occurrences of the nonlinearities, discrete time-delays and distributed time-delays, where all the stochastic variables are mutually independent but obey the Bernoulli distribution. The main purpose of this paper is to design a fault detection filter such that, in the presence of measurement quantization, the overall fault detection dynamics is exponentially stable in the mean square and, at the same time, the error between the residual signal and the fault signal is made as small as possible. Sufficient conditions are first established via intensive stochastic analysis for the existence of the desired fault detection filters, and then the explicit expression of the desired filter gains is derived by means of the feasibility of certain matrix inequalities. Also, the optimal performance index for the addressed fault detection problem can be obtained by solving an auxiliary convex optimization problem. A practical example is provided to show the usefulness and effectiveness of the proposed design method
Distributed Adaptive Fault-Tolerant Control of Uncertain Multi-Agent Systems
This paper presents an adaptive fault-tolerant control (FTC) scheme for a
class of nonlinear uncertain multi-agent systems. A local FTC scheme is
designed for each agent using local measurements and suitable information
exchanged between neighboring agents. Each local FTC scheme consists of a fault
diagnosis module and a reconfigurable controller module comprised of a baseline
controller and two adaptive fault-tolerant controllers activated after fault
detection and after fault isolation, respectively. Under certain assumptions,
the closed-loop system's stability and leader-follower consensus properties are
rigorously established under different modes of the FTC system, including the
time-period before possible fault detection, between fault detection and
possible isolation, and after fault isolation
- …