FPGA based data acquisition system for COMPASS experiment

This paper discusses the present data acquisition system (DAQ) of the COMPASS experiment at CERN and presents development of a new DAQ. The new DAQ must preserve present data format and be able to communicate with FPGA cards. Parts of the new DAQ are based on state machines and they are implemented in C++ with usage of the QT framework, the DIM library, and the IPBus technology. Prototype of the system is prepared and communication through DIM between parts was tested. An implementation of the IPBus technology was prepared and tested. The new DAQ proved to be able to fulfill requirements.Comment: 8 pages, CHEP 201

A digital calorimetric trigger for the COMPASS experiment at CERN

In order to provide a trigger for the Primakoff reaction, in 2009, the trigger system of the COMPASS experiment at CERN will be extend by an electromagnetic calorimeter trigger. Since it was decided to gain from various benefits of digital data processing, an FPGA based implementation of the trigger is foreseen, running on the front-end electronics, which are used for data acquisition at the same time. This, however, includes further modification of the existing trigger system to combine the digital calorimeter trigger, with its higher latency, and the analogue trigger signals, which will also make use of digital data processing

A Large-Scale FPGA-Based Trigger and Dead-Time Free DAQ System for the Kaos Spectrometer at MAMI

The Kaos spectrometer is maintained by the A1 collaboration at the Mainz Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions. For its electron-arm two vertical planes of fiber arrays, each comprising approximately 10 000 fibers, are operated close to zero degree scattering angle and in close proximity to the electron beam. A nearly dead-time free DAQ system to acquire timing and tracking information has been installed for this spectrometer arm. The signals of 144 multi-anode photomultipliers are collected by 96-channel front-end boards, digitized by double-threshold discriminators and the signal time is picked up by state-of-the-art F1 time-to-digital converter chips. In order to minimize background rates a sophisticated trigger logic was implemented in newly developed Vuprom modules. The trigger performs noise suppression, signal cluster finding, particle tracking, and coincidence timing, and can be expanded for kinematical matching (e'K^+) coincidences. The full system was designed to process more than 4 000 read-out channels and to cope with the high electron flux in the spectrometer and the high count rate requirement of the detectors. It was successfully in-beam tested at MAMI in 2009.Comment: Contributed to 17th IEEE Real Time Conference (RT10), Lisbon, 24-28 May 201

Development and Performance Verification of the GANDALF High-Resolution Transient Recorder System

With present-day detectors in high energy physics one often faces fast analog pulses of a few nanoseconds length which cover large dynamic ranges. In many experiments both amplitude and timing information have to be measured with high accuracy. Additionally, the data rate per readout channel can reach several MHz, which leads to high demands on the separation of pile-up pulses. For an upgrade of the COMPASS experiment at CERN we have designed the GANDALF transient recorder with a resolution of 12bit@1GS/s and an analog bandwidth of 500\:MHz. Signals are digitized with high precision and processed by fast algorithms to extract pulse arrival times and amplitudes in real-time and to generate trigger signals for the experiment. With up to 16 analog channels, deep memories and a high data rate interface, this 6U-VME64x/VXS module is not only a dead-time free digitization unit but also has huge numerical capabilities provided by the implementation of a Virtex5-SXT FPGA. Fast algorithms implemented in the FPGA may be used to disentangle possible pile-up pulses and determine timing information from sampled pulse shapes with a time resolution better than 50 ps.Comment: 5 pages, 9 figure

Programmable Trigger Logic Unit Based on FPGA Technology

A programmable trigger logic module (TRILOMO) was implemented successfully in an FPGA using their internal look-up tables to save Boolean functions. Up to 16 trigger input signals can be combined logically for a fast trigger decision. The new feature is that the trigger decision is VME register based. The changes are made without modifying the FPGA code. Additionally the module has an excellent signal delay adjustment.Comment: 4 pages, 4 figure

TDC Chip and Readout Driver Developments for COMPASS and LHC-Experiments

A new TDC-chip is under development for the COMPASS experiment at CERN. The ASIC, which exploits the 0.6 micrometer CMOS sea-of-gate technology, will allow high resolution time measurements with digitization of 75 ps, and an unprecedented degree of flexibility accompanied by high rate capability and low power consumption. Preliminary specifications of this new TDC chip are presented. Furthermore a FPGA based readout-driver and buffer-module as an interface between the front-end of the COMPASS detector systems and an optical S-LINK is in development. The same module serves also as remote fan-out for the COMPASS trigger distribution and time synchronization system. This readout-driver monitors the trigger and data flow to and from front-ends. In addition, a specific data buffer structure and sophisticated data flow control is used to pursue local pre-event building. At start-up the module controls all necessary front-end initializations.Comment: 5 pages, 4 figure

Artificial Spill Generator at COMPASS

openThe Artificial Spill Generator firmware for controlling, monitoring, and generating accelerator timing signals, has been developed for the DAQ system of CERN SPS M2 beamline experiments COMPASS and AMBER, within the frame of the Summer Student Program. In this work, the COMPASS experimental context is described, reporting its field of research, the main purposes of its creation, and the architecture of its spectrometer setup. A more detailed presentation of its Trigger and DAQ systems is also produced, providing a description of the bigger architecture in which the Artificial Spill Generator was first devised and eventually deployed. The structure and behaviour of the M2 beam line of CERN SPS exploited by COMPASS is explained, providing links with the functioning of the FPGA-based continuously run- ning DAQ currently used in the experiment. Moreover, the hardware and software monitoring tools of the DAQ are presented, making comments on how they interact with the Artificial Spill Generator. Eventually, the logic and the behavior of the firmware are reported in detail, explaining the different tasks and measurements associated with such a module. After having passed all the required tests, the Artificial Spill Generator firmware has been programmed into an FPGA board, which is currently still implemented in COMPASS and AMBER DAQ systems, improving their acquisition performances

The Communication Library DIALOG for iFDAQ of the COMPASS Experiment

Modern experiments in high energy physics impose great demands on the reliability, the efficiency, and the data rate of Data Acquisition Systems (DAQ). This contribution focuses on the development and deployment of the new communication library DIALOG for the intelligent, FPGA-based Data Acquisition System (iFDAQ) of the COMPASS experiment at CERN. The iFDAQ utilizing a hardware event builder is designed to be able to readout data at the maximum rate of the experiment. The DIALOG library is a communication system both for distributed and mixed environments, it provides a network transparent inter-process communication layer. Using the high-performance and modern C++ framework Qt and its Qt Network API, the DIALOG library presents an alternative to the previously used DIM library. The DIALOG library was fully incorporated to all processes in the iFDAQ during the run 2016. From the software point of view, it might be considered as a significant improvement of iFDAQ in comparison with the previous run. To extend the possibilities of debugging, the online monitoring of communication among processes via DIALOG GUI is a desirable feature. In the paper, we present the DIALOG library from several insights and discuss it in a detailed way. Moreover, the efficiency measurement and comparison with the DIM library with respect to the iFDAQ requirements is provided

The COMPASS Experiment at CERN

The COMPASS experiment makes use of the CERN SPS high-intensitymuon and hadron beams for the investigation of the nucleon spin structure and the spectroscopy of hadrons. One or more outgoing particles are detected in coincidence with the incoming muon or hadron. A large polarized target inside a superconducting solenoid is used for the measurements with the muon beam. Outgoing particles are detected by a two-stage, large angle and large momentum range spectrometer. The setup is built using several types of tracking detectors, according to the expected incident rate, required space resolution and the solid angle to be covered. Particle identification is achieved using a RICH counter and both hadron and electromagnetic calorimeters. The setup has been successfully operated from 2002 onwards using a muon beam. Data with a hadron beam were also collected in 2004. This article describes the main features and performances of the spectrometer in 2004; a short summary of the 2006 upgrade is also given.Comment: 84 papes, 74 figure