Outdoor altitude stabilization of QuadRotor based on type-2 fuzzy and fuzzy PID

This paper presents a design of altitude stabilization of QuadRotor based on type-2 fuzzy and fuzzy PID. This practical design is implemented outdoor. Barometric and sonar sensor were used in this experiment as an input for the controller YoHe. The throttle signal as a control input was provided by the controller to leveling QuadRotor in particular altitude and known well as altitude stabilization. The parameter of type-2 fuzzy and fuzzy PID was tuned in several heights to get the best control parameter for any height. Type-2 fuzzy produced better result than fuzzy PID but had a slow response in the beginning

Forkloader Position Control for A Mini Heavy Loaded Vehicle using Fuzzy Logic-Antiwindup Control

This paper presents a proposed integrated Takagi-Sugeno-Kang (TSK) type Fuzzy Logic control (TSK-FLC) with Antiwindup elements for a forkloader position control of a Mini Heavy Loaded Forklift Autonomous Guided Vehicle (MHeLFAGV). The study was carried out by modeling TSK-FLC as a close-loop control for the each axis of the fork-lift’s movement. The degree of membership is designed with reference to the system response, in which ultrasonic sensor with 1cm resolution is used. Moreover, the rule base is determined and optimized to deal with microcontroller processing speed. In order to cater for the windup phenomenon, a proportional and integrated antiwindup elements are integrated into the TSK-FLC model. This control strategy consumes less memory and is expected to increase the time response of the control system. The experiment and analysis is done on the actual forkloader unit of MHeLFAGV system. The experiment was done on the vertical axis motion since horizontal motion will have the same characteristic pattern of implementation and characteristic of tuning. The experiment shows that the proposed integrated TSK-FLC with antiwindup elements is able to speed up the time response of the system and eliminate the overshoot as well as oscillation on the forkloader movement

Forkloader Position Control for A Mini Heavy Loaded Vehicle using Fuzzy Logic-Antiwindup Control

This paper presents a proposed integrated Takagi-Sugeno-Kang (TSK) type Fuzzy Logic control (TSK-FLC) with Antiwindup elements for a forkloader position control of a Mini Heavy Loaded Forklift Autonomous Guided Vehicle (MHeLFAGV). The study was carried out by modeling TSK-FLC as a close-loop control for the each axis of the fork-lift’s movement. The degree of membership is designed with reference to the system response, in which ultrasonic sensor with 1cm resolution is used. Moreover, the rule base is determined and optimized to deal with microcontroller processing speed. In order to cater for the windup phenomenon, a proportional and integrated antiwindup elements are integrated into the TSK-FLC model. This control strategy consumes less memory and is expected to increase the time response of the control system. The experiment and analysis is done on the actual forkloader unit of MHeLFAGV system. The experiment was done on the vertical axis motion since horizontal motion will have the same characteristic pattern of implementation and characteristic of tuning. The experiment shows that the proposed integrated TSK-FLC with antiwindup elements is able to speed up the time response of the system and eliminate the overshoot as well as oscillation on the forkloader movement. 

Development of an automatics parallel parking system for nonholonomic mobile robot

This paper depicts the development of backward automatic parallel parking system for nonholonomic mobile robot. The configuration of the system consists of ultrasonic sensor, rotary encoder, controller, and actuators. The path planning algorithm is developed based on the data acquired from the sensor. The proposed idea of the path planning is based on the geometrical equations in which the needed information is referring to the distance between the mobile robot and the adjacent object. The ultrasonic sensor and rotary encoder respectively used to detect parking area and measure the detected space. A PIC32MX360F512L microcontroller is used in order to generate the algorithm and control the movement of the mobile robot. System implementation is briefly described to depict the system as a whole. Experimental results are presented to demonstrate and validate effectiveness of the technique used

Proceedings of the 4th field robot event 2006, Stuttgart/Hohenheim, Germany, 23-24th June 2006

Zeer uitgebreid verslag van het 4e Fieldrobotevent, dat gehouden werd op 23 en 24 juni 2006 in Stuttgart/Hohenhei

Fuzzy Robot Controller Tuning with Biogeography-Based Optimization

Biogeography-based optimization (BBO) is an evolutionary algorithm (EA) based upon the models of biogeography, which describe the relationship between habitat suitability and the migration of species across habitats. In this work, we apply BBO to the problem of tuning the fuzzy tracking controller of mobile robots. This is an extension of previous work, in which we used BBO to tune a proportional-derivative (PD) controller for these robots. We show that BBO can successfully tune the shape of membership functions for a fuzzy controller with both simulation and real world experimental results

Extruder for food product (otak–otak) with heater and roll cutter

Food extrusion is a form of extrusion used in food industries. It is a process by which a set of mixed ingredients are forced through an opening in a perforated plate or die with a design specific to the food, and is then cut to a specified size by blades [1]. Summary of the invention principal objects of the present invention are to provide a machine capable of continuously producing food products having an’ extruded filler material of meat or similarity and an extruded outer covering of a moldable food product, such as otak-otak, that completely envelopes the filler material

Navigation and Control of Automated Guided Vehicle using Fuzzy Inference System and Neural Network Technique

Automatic motion planning and navigation is the primary task of an Automated Guided Vehicle (AGV) or mobile robot. All such navigation systems consist of a data collection system, a decision making system and a hardware control system. Artificial Intelligence based decision making systems have become increasingly more successful as they are capable of handling large complex calculations and have a good performance under unpredictable and imprecise environments. This research focuses on developing Fuzzy Logic and Neural Network based implementations for the navigation of an AGV by using heading angle and obstacle distances as inputs to generate the velocity and steering angle as output. The Gaussian, Triangular and Trapezoidal membership functions for the Fuzzy Inference System and the Feed forward back propagation were developed, modelled and simulated on MATLAB. The reserach presents an evaluation of the four different decision making systems and a study has been conducted to compare their performances. The hardware control for an AGV should be robust and precise. For practical implementation a prototype, that functions via DC servo motors and a gear systems, was constructed and installed on a commercial vehicle

A Tutorial on Learning Human Welder\u27s Behavior: Sensing, Modeling, and Control

Human welder\u27s experiences and skills are critical for producing quality welds in manual GTAW process. Learning human welder\u27s behavior can help develop next generation intelligent welding machines and train welders faster. In this tutorial paper, various aspects of mechanizing the welder\u27s intelligence are surveyed, including sensing of the weld pool, modeling of the welder\u27s adjustments and this model-based control approach. Specifically, different sensing methods of the weld pool are reviewed and a novel 3D vision-based sensing system developed at University of Kentucky is introduced. Characterization of the weld pool is performed and human intelligent model is constructed, including an extensive survey on modeling human dynamics and neuro-fuzzy techniques. Closed-loop control experiment results are presented to illustrate the robustness of the model-based intelligent controller despite welding speed disturbance. A foundation is thus established to explore the mechanism and transformation of human welder\u27s intelligence into robotic welding system. Finally future research directions in this field are presented