8,087 research outputs found
Development of Economic Water Usage Sensor and Cyber-Physical Systems Co-Simulation Platform for Home Energy Saving
In this thesis, two Cyber-Physical Systems (CPS) approaches were considered to reduce residential building energy consumption. First, a flow sensor was developed for residential gas and electric storage water heaters. The sensor utilizes unique temperature changes of tank inlet and outlet pipes upon water draw to provide occupant hot water usage. Post processing of measured pipe temperature data was able to detect water draw events. Conservation of energy was applied to heater pipes to determine relative internal water flow rate based on transient temperature measurements. Correlations between calculated flow and actual flow were significant at a 95% confidence level. Using this methodology, a CPS water heater controller can activate existing residential storage water heaters according to occupant hot water demand. The second CPS approach integrated an open-source building simulation tool, EnergyPlus, into a CPS simulation platform developed by the National Institute of Standards and Technology (NIST). The NIST platform utilizes the High Level Architecture (HLA) co-simulation protocol for logical timing control and data communication. By modifying existing EnergyPlus co-simulation capabilities, NIST’s open-source platform was able to execute an uninterrupted simulation between a residential house in EnergyPlus and an externally connected thermostat controller. The developed EnergyPlus wrapper for HLA co-simulation can allow active replacement of traditional real-time data collection for building CPS development. As such, occupant sensors and simple home CPS product can allow greater residential participation in energy saving practices, saving up to 33% on home energy consumption nationally
Enabling Micro-level Demand-Side Grid Flexiblity in Resource Constrained Environments
The increased penetration of uncertain and variable renewable energy presents
various resource and operational electric grid challenges. Micro-level
(household and small commercial) demand-side grid flexibility could be a
cost-effective strategy to integrate high penetrations of wind and solar
energy, but literature and field deployments exploring the necessary
information and communication technologies (ICTs) are scant. This paper
presents an exploratory framework for enabling information driven grid
flexibility through the Internet of Things (IoT), and a proof-of-concept
wireless sensor gateway (FlexBox) to collect the necessary parameters for
adequately monitoring and actuating the micro-level demand-side. In the summer
of 2015, thirty sensor gateways were deployed in the city of Managua
(Nicaragua) to develop a baseline for a near future small-scale demand response
pilot implementation. FlexBox field data has begun shedding light on
relationships between ambient temperature and load energy consumption, load and
building envelope energy efficiency challenges, latency communication network
challenges, and opportunities to engage existing demand-side user behavioral
patterns. Information driven grid flexibility strategies present great
opportunity to develop new technologies, system architectures, and
implementation approaches that can easily scale across regions, incomes, and
levels of development
Central monitoring system for ambient assisted living
Smart homes for aged care enable the elderly to stay in their own homes longer. By means of various types of ambient and wearable sensors information is gathered on people living in smart homes for aged care. This information is then processed to determine the activities of daily living (ADL) and provide vital information to carers. Many examples of smart homes for aged care can be found in literature, however, little or no evidence can be found with respect to interoperability of various sensors and devices along with associated functions. One key element with respect to interoperability is the central monitoring system in a smart home. This thesis analyses and presents key functions and requirements of a central monitoring system. The outcomes of this thesis may benefit developers of smart homes for aged care
Recommended from our members
Model-Driven Analytics of Energy Meter Data in Smart Homes
The proliferation of smart meter deployments has led to significant interest in analyzing home energy use as part of the emerging \u27smart grid\u27. As buildings account for nearly 40% of society\u27s energy use, data from smart meters provides significant opportunities for both utilities and consumers to optimize energy use, minimize waste, and provide insight into how modern homes and devices use energy. Meter data is often difficult to analyze, however, owing to the aggregation of many disparate and complex loads as well as relatively coarse measurement granularities. At utility scales, analysis is further complicated by the vast quantity of data, which precludes the use of computationally intensive techniques when monitoring hundreds or even thousands of homes.
In this thesis, I present an architecture for enabling smart homes using smart energy meters, encompassing efficient data collection and analysis to understand the behavior of home devices. I consider four primary challenges within this domain: (1) providing low-overhead data collection and processing for many devices, (2) designing models characterizing the energy use of modern devices, (3) using these models to track the real-time behavior of known devices, and (4) automatic identification of unknown devices in the home.
To enable practical smart homes, my proposed architecture combines low-cost, off-the-shelf sensing equipment with a hybrid local and cloud-based processing backend. To analyze data within the environment, I first characterize the basic device types present in today\u27s homes (e.g., resistive, inductive, or non-linear) and distill the essential usage characteristics of each type. Using these characteristics, I construct a set of models that more accurately represents real-world devices than previous simplistic models. I then leverage this modeling framework to track the behavior of specific devices, using a technique that runs in close to real-time and can scale to many devices. Finally, I present a technique to automatically identify unknown devices attached to smart outlets in homes, which relieves homeowners of the need to manually describe devices in order to employ smart home optimizations
SHELDON Smart habitat for the elderly.
An insightful document concerning active and assisted living under different perspectives: Furniture and habitat, ICT solutions and Healthcare
The Emerging Internet of Things Marketplace From an Industrial Perspective: A Survey
The Internet of Things (IoT) is a dynamic global information network
consisting of internet-connected objects, such as Radio-frequency
identification (RFIDs), sensors, actuators, as well as other instruments and
smart appliances that are becoming an integral component of the future
internet. Over the last decade, we have seen a large number of the IoT
solutions developed by start-ups, small and medium enterprises, large
corporations, academic research institutes (such as universities), and private
and public research organisations making their way into the market. In this
paper, we survey over one hundred IoT smart solutions in the marketplace and
examine them closely in order to identify the technologies used,
functionalities, and applications. More importantly, we identify the trends,
opportunities and open challenges in the industry-based the IoT solutions.
Based on the application domain, we classify and discuss these solutions under
five different categories: smart wearable, smart home, smart, city, smart
environment, and smart enterprise. This survey is intended to serve as a
guideline and conceptual framework for future research in the IoT and to
motivate and inspire further developments. It also provides a systematic
exploration of existing research and suggests a number of potentially
significant research directions.Comment: IEEE Transactions on Emerging Topics in Computing 201
Detecting Activities of Daily Living and Routine Behaviours in Dementia Patients Living Alone Using Smart Meter Load Disaggregation
The emergence of an ageing population is a significant public health concern. This has led to an increase in the number of people living with progressive neurodegenerative disorders. The strain this places on services means providing 24-hour monitoring is not sustainable. No solution exists to non-intrusively monitor the wellbeing of patients with dementia, resulting in delayed intervention. Using machine learning and signal processing, domestic energy supplies can be disaggregated to detect appliance usage. This enables Activities of Daily Living (ADLs) to be assessed. The aim is to facilitate early intervention and enable patients to stay in their homes for longer. A Support Vector Machine (SVM) and Random Decision Forest classifier are modelled using data from three test homes. The trained models are then used to monitor two patients with dementia during a six-month clinical trial undertaken in partnership with Mersey Care NHS Foundation Trust. In the case of load disaggregation, the SVM achieved (AUC=0.86074, Sen=0.756 and Spec=0.92838). While the Decision Forest achieved (AUC=0.9429, Sen=0.9634 and Spec=0.9634). ADLs are also analysed to identify the behavioural patterns of the occupant while detecting alterations in routine. The approach is sensitive in identifying behavioural routines and detecting anomalies in patient behaviour
IoT and Blockchain for Smart Cities
Blockchain is a Distributed Ledger Technology (DLT) that makes it possible to secure any type of transaction. This is because the information stored on the Blockchain is immutable, impeding any type of fraud or modification of the data. It was first created for Bitcoin transactions; however, the research community has realized its potential quickly, and started using it for purposes other than cryptocurrency transactions. Blockchain may even be used to secure and provide reliability to the data being transmitted between computational systems, ensuring their immutability. Given the amount of data produced within a smart city, the use of Blockchain is imperative in smart cities, as it protects them from cyberattacks and fraud. Moreover, the transparency of the information stored on Blockchain means that it helps create a more just and democratic society
- …