On implementing dynamically reconfigurable architectures

Dynamically reconfigurable architectures have the ability to change their structure at each step of a computation. This dissertation studies various aspects of implementing dynamic reconfiguration, ranging from hardware building blocks and low-level architectures to modeling issues and high-level algorithm design. First we derive conditions under which classes of communication sets can be optimally scheduled on the circuit-switched tree (CST). Then we present a method to configure the CST to perform in constant time all communications scheduled for a step. This results in a constant time implementation of a step of a segmentable bus, a fundamental dynamically reconfigurable structure. We introduce a new bus delay measure (bends-cost) and define the bends-cost LR-Mesh; the LR-Mesh is a widely used reconfigurable model. Unlike the (idealized) LR-Mesh, which ignores bus delay, the bends-cost LR-Mesh uses the number of bends in a bus to estimate its delay. We present an implementation for which the bends-cost is an accurate estimate of the actual delay. We present algorithms to simulate various LR-Mesh configuration classes on the bends-cost LR-Mesh. For semimonotonic configurations, a Θ(N)*Θ(N) bends-cost LR-Mesh with bus delay at most D can simulate a step of the idealized N*N LR-Mesh in O((log N/(log D-log Δ))2) time (where Δ is the delay of an N-element segmentable bus), while employing about the same number of processors. For some special cases this time reduces to O(log N/(log D-log Δ)). If D=Nε, for an arbitrarily small constant ε \u3e 0, then the running times of bends-cost LR-Mesh algorithms are within a constant of their idealized counterparts. We also prove that with a polynomial blowup in the number of processors and D=Nε, the bends-cost LR-Mesh can simulate any step of an idealized LR-Mesh in constant time, thereby establishing that these models have the same power. We present an implementation (in VHDL) of the Enhanced Self Reconfigurable Gate Array (E-SRGA) architecture and perform a cost-benefit study for different dynamic reconfiguration features. This study shows our approach to be feasible

06141 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 02.04.06 to 07.04.06, the Dagstuhl Seminar 06141 ``Dynamically Reconfigurable Architectures\u27\u27 was held in the International Conference and Research Center (IBFI), Schloss Dagstuhl. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

10281 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 11.07.10 to 16.07.10, Dagstuhl Seminar 10281 ``Dynamically Reconfigurable Architectures \u27\u27 was held in Schloss Dagstuhl~--~Leibniz Center for Informatics. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

Virtual Prototyping for Dynamically Reconfigurable Architectures using Dynamic Generic Mapping

This paper presents a virtual prototyping methodology for Dynamically Reconfigurable (DR) FPGAs. The methodology is based around a library of VHDL image processing components and allows the rapid prototyping and algorithmic development of low-level image processing systems. For the effective modelling of dynamically reconfigurable designs a new technique named, Dynamic Generic Mapping is introduced. This method allows efficient representation of dynamic reconfiguration without needing any additional components to model the reconfiguration process. This gives the designer more flexibility in modelling dynamic configurations than other methodologies. Models created using this technique can then be simulated and targeted to a specific technology using the same code. This technique is demonstrated through the realisation of modules for a motion tracking system targeted to a DR environment, RIFLE-62

Generic approach for graph-based description of dynamically reconfigurable architectures

Architectural adaptation is studied for handling adaptation in autonomic distributed systems. It is achieved by implementing a model-based approach for managing reconfiguration of dynamic architectures. Describing such architectures includes defining rules for describing both architectural styles and theirs reconfiguration mechanisms. Within this research context, the work presented in this paper is conducted using formal specification based on graphs and graph rewriting appropriately for tackling architectural adaptation problems. A graph-based general approach for describing architectures and handling their dynamic reconfiguration is introduced. Our approach is illustrated in the context of a distributed hierarchical application. The formal models that allow the generation of a graph grammar for dynamic architecture description and the automatic definition of transformation rules for achieving intern self-protecting during the adaptation are elaborated

Model-based design of correct controllers for dynamically reconfigurable architectures

International audienceDynamically reconfigurable hardware has been identified as a promising solution for the design of energy efficient embedded systems. However, its adoption is limited by the costly design effort including verification and validation, which is even more complex than for non dynamically reconfigurable systems. In this paper, we propose a tool-supported formal method to automatically design a correct-by-construction control of the reconfiguration. By representing system behaviors with automata, we exploit automated algorithms to synthesize controllers that safely enforce reconfiguration strategies formulated as properties to be satisfied by control. We design generic modeling patterns for a class of reconfigurable architectures, taking into account both hardware architecture and applications, as well as relevant control objectives. We validate our approach on two case studies implemented on FPGAs

Hyperreconfigurable architectures for fast run time reconfiguration

Dynamically reconfigurable architectures or systems are able to reconfigure their function and/or structure to suit changing needs of a computation during run time. The increasing flexibility of modern dynamically reconfigurable systems improves their adaptability but also makes fast reconfiguration difficult because of the large amount of necessary reconfiguration information. However, even when a computation uses this flexibility it is not use it all the time. Therefore, we propose to make the potential for reconfiguration itself reconfigurable. This allows for speeding up reconfiguration operations during phases where only parts of the total flexibility are required. Such architectures are called hyperreconfigurable and uses two types of reconfiguration operations: hyperreconfigurations for changing the reconfiguration potential and ordinary reconfigurations for actually configuring a new context for a computation