Man-Machine Interface System for Neuromuscular Training and Evaluation Based on EMG and MMG Signals

This paper presents the UVa-NTS (University of Valladolid Neuromuscular Training System), a multifunction and portable Neuromuscular Training System. The UVa-NTS is designed to analyze the voluntary control of severe neuromotor handicapped patients, their interactive response, and their adaptation to neuromuscular interface systems, such as neural prostheses or domotic applications. Thus, it is an excellent tool to evaluate the residual muscle capabilities in the handicapped. The UVa-NTS is composed of a custom signal conditioning front-end and a computer. The front-end electronics is described thoroughly as well as the overall features of the custom software implementation. The software system is composed of a set of graphical training tools and a processing core. The UVa-NTS works with two classes of neuromuscular signals: the classic myoelectric signals (MES) and, as a novelty, the myomechanic signals (MMS). In order to evaluate the performance of the processing core, a complete analysis has been done to classify its efficiency and to check that it fulfils with the real-time constraints. Tests were performed both with healthy and selected impaired subjects. The adaptation was achieved rapidly, applying a predefined protocol for the UVa-NTS set of training tools. Fine voluntary control was demonstrated to be reached with the myoelectric signals. And the UVa-NTS demonstrated to provide a satisfactory voluntary control when applying the myomechanic signals

Una implementación de un sistema de control domótico basada en servicios web

El objetivo de este trabajo es presentar una implementación de un Sistema Domótico para controlar diferentes dispositivos eléctricos de una vivienda tanto en forma local como así también en forma remota, utilizando una conexión a Internet hogareña. Para permitir estos dos puntos de acceso, el sistema incluye un servidor que provee servicios web a las aplicaciones controladoras instaladas en el hogar. Este servidor también ofrece una interfaz que utiliza AJAX para optimizar la manipulación de los dispositivos. Finalmente, se presentan consideraciones sobre la generación de rutinas ejecutables de encendido y apagado de los electrodomésticos utilizando herramientas de aprendizaje automatizado.The aim of this project is to show the development of a Domotic System to control differents electrical devices in a house either from inside the building or by remote control using the Internet. In order to have these two functions available, the system includes a Server that provides Web Services to the controlling applications in the house. This Server also offers an interface that uses AJAX to optimize device handling. Finally, considerations about how to generate executing turn on/off routines of electrical household appliances using machine learning tools are presentedIV Workshop de Ingeniería de Software y Base de DatosRed de Universidades con Carreras en Informática (RedUNCI

Una implementación de un sistema de control domótico basada en servicios web

El objetivo de este trabajo es presentar una implementación de un Sistema Domótico para controlar diferentes dispositivos eléctricos de una vivienda tanto en forma local como así también en forma remota, utilizando una conexión a Internet hogareña. Para permitir estos dos puntos de acceso, el sistema incluye un servidor que provee servicios web a las aplicaciones controladoras instaladas en el hogar. Este servidor también ofrece una interfaz que utiliza AJAX para optimizar la manipulación de los dispositivos. Finalmente, se presentan consideraciones sobre la generación de rutinas ejecutables de encendido y apagado de los electrodomésticos utilizando herramientas de aprendizaje automatizado.The aim of this project is to show the development of a Domotic System to control differents electrical devices in a house either from inside the building or by remote control using the Internet. In order to have these two functions available, the system includes a Server that provides Web Services to the controlling applications in the house. This Server also offers an interface that uses AJAX to optimize device handling. Finally, considerations about how to generate executing turn on/off routines of electrical household appliances using machine learning tools are presentedIV Workshop de Ingeniería de Software y Base de DatosRed de Universidades con Carreras en Informática (RedUNCI

TaskCBP: an intelligent agent for task planning in elderly care

This paper presents an autonomous intelligent agent developed for healthcare in geriatric residences. The paper focuses on the role of ambient intelligence in the automation of healthcare services. The work here presented shows the development of an autonomous agent, TaskCBP, which incorporates a model of human thinking, such as reasoning based on past experiences. The planning mechanism integrated within the agent has been implemented by means of a novel QSOR neural network. The system has been tested and this paper presents the results obtaine

Applications for wireless sensor networks : tracking with binary proximity sensors

El interés cada vez mayor por las redes de sensores inalámbricos pueden ser entendido simplemente pensando en lo que esencialmente son: un gran número de pequeños nodos sensores autoalimentados que recogen información o detectan eventos especiales y se comunican de manera inalámbrica, con el objetivo final de entregar sus datos procesados a una estación base. Los nodos sensores están densamente desplegados dentro del área de interés, se pueden desplegar al azar y tienen capacidad de cooperación. Por lo general, estos dispositivos son pequeños y de bajo costo, de modo que pueden ser producidos y desplegados en gran numero aunque sus recursos en términos de energía, memoria, velocidad de cálculo y ancho de banda están enormemente limitados. Detección, tratamiento y comunicación son tres elementos clave cuya combinación en un pequeño dispositivo permite lograr un gran número de aplicaciones. Las redes de sensores proporcionan oportunidades sin fin, pero al mismo tiempo plantean retos formidables, tales como lograr el máximo rendimiento de una energía que es escasa y por lo general un recurso no renovable. Sin embargo, los recientes avances en la integración a gran escala, integrado de hardware de computación, comunicaciones, y en general, la convergencia de la informática y las comunicaciones, están haciendo de esta tecnología emergente una realidad. Del mismo modo, los avances en la nanotecnología están empezando a hacer que todo gire entorno a las redes de pequeños sensores y actuadores distribuidos. Hay diferentes tipos de sensores tales como sensores de presión, acelerómetros, cámaras, sensores térmicos o un simple micrófono. Supervisan las condiciones presentes en diferentes lugares tales como la temperatura, humedad, el movimiento, la luminosidad, presión, composición del suelo, los niveles de ruido, la presencia o ausencia de ciertos tipos de objetos, los niveles de tensión mecánica sobre objetos adheridos y las características momentáneas tales como la velocidad , la dirección y el tamaño de un objeto, etc. Se comprobara el estado de las Redes Inalámbricas de Sensores y se revisaran los protocolos más famosos. Así mismo, se examinara la identificación por radiofrecuencia (RFID) ya que se está convirtiendo en algo actual y su presencia importante. La RFID tiene un papel crucial que desempeñar en el futuro en el mundo de los negocios y los individuos por igual. El impacto mundial que ha tenido la identificación sin cables está ejerciendo fuertes presiones en la tecnología RFID, los servicios de investigación y desarrollo, desarrollo de normas, el cumplimiento de la seguridad y la privacidad y muchos más. Su potencial económico se ha demostrado en algunos países mientras que otros están simplemente en etapas de planificación o en etapas piloto, pero aun tiene que afianzarse o desarrollarse a través de la modernización de los modelos de negocio y aplicaciones para poder tener un mayor impacto en la sociedad. Las posibles aplicaciones de redes de sensores son de interés para la mayoría de campos. La monitorización ambiental, la guerra, la educación infantil, la vigilancia, la micro-cirugía y la agricultura son solo unos pocos ejemplos de los muchísimos campos en los que tienen cabida las redes mencionadas anteriormente. Estados Unidos de América es probablemente el país que más ha investigado en esta área por lo que veremos muchas soluciones propuestas provenientes de ese país. Universidades como Berkeley, UCLA (Universidad de California, Los Ángeles) Harvard y empresas como Intel lideran dichas investigaciones. Pero no solo EE.UU. usa e investiga las redes de sensores inalámbricos. La Universidad de Southampton, por ejemplo, está desarrollando una tecnología para monitorear el comportamiento de los glaciares mediante redes de sensores que contribuyen a la investigación fundamental en glaciología y de las redes de sensores inalámbricos. Así mismo, Coalesenses GmbH (Alemania) y Zurich ETH están trabajando en diversas aplicaciones para redes de sensores inalámbricos en numerosas áreas. Una solución española será la elegida para ser examinada más a fondo por ser innovadora, adaptable y polivalente. Este estudio del sensor se ha centrado principalmente en aplicaciones de tráfico, pero no se puede olvidar la lista de más de 50 aplicaciones diferentes que ha sido publicada por la firma creadora de este sensor específico. En la actualidad hay muchas tecnologías de vigilancia de vehículos, incluidos los sensores de bucle, cámaras de video, sensores de imagen, sensores infrarrojos, radares de microondas, GPS, etc. El rendimiento es aceptable, pero no suficiente, debido a su limitada cobertura y caros costos de implementación y mantenimiento, especialmente este ultimo. Tienen defectos tales como: línea de visión, baja exactitud, dependen mucho del ambiente y del clima, no se puede realizar trabajos de mantenimiento sin interrumpir las mediciones, la noche puede condicionar muchos de ellos, tienen altos costos de instalación y mantenimiento, etc. Por consiguiente, en las aplicaciones reales de circulación, los datos recibidos son insuficientes o malos en términos de tiempo real debido al escaso número de detectores y su costo. Con el aumento de vehículos en las redes viales urbanas las tecnologías de detección de vehículos se enfrentan a nuevas exigencias. Las redes de sensores inalámbricos son actualmente una de las tecnologías más avanzadas y una revolución en la detección de información remota y en las aplicaciones de recogida. Las perspectivas de aplicación en el sistema inteligente de transporte son muy amplias. Con este fin se ha desarrollado un programa de localización de objetivos y recuento utilizando una red de sensores binarios. Esto permite que el sensor necesite mucha menos energía durante la transmisión de información y que los dispositivos sean más independientes con el fin de tener un mejor control de tráfico. La aplicación se centra en la eficacia de la colaboración de los sensores en el seguimiento más que en los protocolos de comunicación utilizados por los nodos sensores. Las operaciones de salida y retorno en las vacaciones son un buen ejemplo de por qué es necesario llevar la cuenta de los coches en las carreteras. Para ello se ha desarrollado una simulación en Matlab con el objetivo localizar objetivos y contarlos con una red de sensores binarios. Dicho programa se podría implementar en el sensor que Libelium, la empresa creadora del sensor que se examinara concienzudamente, ha desarrollado. Esto permitiría que el aparato necesitase mucha menos energía durante la transmisión de información y los dispositivos sean más independientes. Los prometedores resultados obtenidos indican que los sensores de proximidad binarios pueden formar la base de una arquitectura robusta para la vigilancia de áreas amplias y para el seguimiento de objetivos. Cuando el movimiento de dichos objetivos es suficientemente suave, no tiene cambios bruscos de trayectoria, el algoritmo ClusterTrack proporciona un rendimiento excelente en términos de identificación y seguimiento de trayectorias los objetos designados como blancos. Este algoritmo podría, por supuesto, ser utilizado para numerosas aplicaciones y se podría seguir esta línea de trabajo para futuras investigaciones. No es sorprendente que las redes de sensores de binarios de proximidad hayan atraído mucha atención últimamente ya que, a pesar de la información mínima de un sensor de proximidad binario proporciona, las redes de este tipo pueden realizar un seguimiento de todo tipo de objetivos con la precisión suficiente. Abstract The increasing interest in wireless sensor networks can be promptly understood simply by thinking about what they essentially are: a large number of small sensing self-powered nodes which gather information or detect special events and communicate in a wireless fashion, with the end goal of handing their processed data to a base station. The sensor nodes are densely deployed inside the phenomenon, they deploy random and have cooperative capabilities. Usually these devices are small and inexpensive, so that they can be produced and deployed in large numbers, and so their resources in terms of energy, memory, computational speed and bandwidth are severely constrained. Sensing, processing and communication are three key elements whose combination in one tiny device gives rise to a vast number of applications. Sensor networks provide endless opportunities, but at the same time pose formidable challenges, such as the fact that energy is a scarce and usually non-renewable resource. However, recent advances in low power Very Large Scale Integration, embedded computing, communication hardware, and in general, the convergence of computing and communications, are making this emerging technology a reality. Likewise, advances in nanotechnology and Micro Electro-Mechanical Systems are pushing toward networks of tiny distributed sensors and actuators. There are different sensors such as pressure, accelerometer, camera, thermal, and microphone. They monitor conditions at different locations, such as temperature, humidity, vehicular movement, lightning condition, pressure, soil makeup, noise levels, the presence or absence of certain kinds of objects, mechanical stress levels on attached objects, the current characteristics such as speed, direction and size of an object, etc. The state of Wireless Sensor Networks will be checked and the most famous protocols reviewed. As Radio Frequency Identification (RFID) is becoming extremely present and important nowadays, it will be examined as well. RFID has a crucial role to play in business and for individuals alike going forward. The impact of ‘wireless’ identification is exerting strong pressures in RFID technology and services research and development, standards development, security compliance and privacy, and many more. The economic value is proven in some countries while others are just on the verge of planning or in pilot stages, but the wider spread of usage has yet to take hold or unfold through the modernisation of business models and applications. Possible applications of sensor networks are of interest to the most diverse fields. Environmental monitoring, warfare, child education, surveillance, micro-surgery, and agriculture are only a few examples. Some real hardware applications in the United States of America will be checked as it is probably the country that has investigated most in this area. Universities like Berkeley, UCLA (University of California, Los Angeles) Harvard and enterprises such as Intel are leading those investigations. But not just USA has been using and investigating wireless sensor networks. University of Southampton e.g. is to develop technology to monitor glacier behaviour using sensor networks contributing to fundamental research in glaciology and wireless sensor networks. Coalesenses GmbH (Germany) and ETH Zurich are working in applying wireless sensor networks in many different areas too. A Spanish solution will be the one examined more thoroughly for being innovative, adaptable and multipurpose. This study of the sensor has been focused mainly to traffic applications but it cannot be forgotten the more than 50 different application compilation that has been published by this specific sensor’s firm. Currently there are many vehicle surveillance technologies including loop sensors, video cameras, image sensors, infrared sensors, microwave radar, GPS, etc. The performance is acceptable but not sufficient because of their limited coverage and expensive costs of implementation and maintenance, specially the last one. They have defects such as: line-ofsight, low exactness, depending on environment and weather, cannot perform no-stop work whether daytime or night, high costs for installation and maintenance, etc. Consequently, in actual traffic applications the received data is insufficient or bad in terms of real-time owed to detector quantity and cost. With the increase of vehicle in urban road networks, the vehicle detection technologies are confronted with new requirements. Wireless sensor network is the state of the art technology and a revolution in remote information sensing and collection applications. It has broad prospect of application in intelligent transportation system. An application for target tracking and counting using a network of binary sensors has been developed. This would allow the appliance to spend much less energy when transmitting information and to make more independent devices in order to have a better traffic control. The application is focused on the efficacy of collaborative tracking rather than on the communication protocols used by the sensor nodes. Holiday crowds are a good case in which it is necessary to keep count of the cars on the roads. To this end a Matlab simulation has been produced for target tracking and counting using a network of binary sensors that e.g. could be implemented in Libelium’s solution. Libelium is the enterprise that has developed the sensor that will be deeply examined. This would allow the appliance to spend much less energy when transmitting information and to make more independent devices. The promising results obtained indicate that binary proximity sensors can form the basis for a robust architecture for wide area surveillance and tracking. When the target paths are smooth enough ClusterTrack particle filter algorithm gives excellent performance in terms of identifying and tracking different target trajectories. This algorithm could, of course, be used for different applications and that could be done in future researches. It is not surprising that binary proximity sensor networks have attracted a lot of attention lately. Despite the minimal information a binary proximity sensor provides, networks of these sensing modalities can track all kinds of different targets classes accurate enough

High-level services for networks-on-chip

Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed

Ubiquitous Robotics System for Knowledge-based Auto-configuration System for Service Delivery within Smart Home Environments

The future smart home will be enhanced and driven by the recent advance of the Internet of Things (IoT), which advocates the integration of computational devices within an Internet architecture on a global scale [1, 2]. In the IoT paradigm, the smart home will be developed by interconnecting a plethora of smart objects both inside and outside the home environment [3-5]. The recent take-up of these connected devices within home environments is slowly and surely transforming traditional home living environments. Such connected and integrated home environments lead to the concept of the smart home, which has attracted significant research efforts to enhance the functionality of home environments with a wide range of novel services. The wide availability of services and devices within contemporary smart home environments make their management a challenging and rewarding task. The trend whereby the development of smart home services is decoupled from that of smart home devices increases the complexity of this task. As such, it is desirable that smart home services are developed and deployed independently, rather than pre-bundled with specific devices, although it must be recognised that this is not always practical. Moreover, systems need to facilitate the deployment process and cope with any changes in the target environment after deployment. Maintaining complex smart home systems throughout their lifecycle entails considerable resources and effort. These challenges have stimulated the need for dynamic auto-configurable services amongst such distributed systems. Although significant research has been directed towards achieving auto-configuration, none of the existing solutions is sufficient to achieve auto-configuration within smart home environments. All such solutions are considered incomplete, as they lack the ability to meet all smart home requirements efficiently. These requirements include the ability to adapt flexibly to new and dynamic home environments without direct user intervention. Fulfilling these requirements would enhance the performance of smart home systems and help to address cost-effectiveness, considering the financial implications of the manual configuration of smart home environments. Current configuration approaches fail to meet one or more of the requirements of smart homes. If one of these approaches meets the flexibility criterion, the configuration is either not executed online without affecting the system or requires direct user intervention. In other words, there is no adequate solution to allow smart home systems to adapt dynamically to changing circumstances, hence to enable the correct interconnections among its components without direct user intervention and the interruption of the whole system. Therefore, it is necessary to develop an efficient, adaptive, agile and flexible system that adapts dynamically to each new requirement of the smart home environment. This research aims to devise methods to automate the activities associated with customised service delivery for dynamic home environments by exploiting recent advances in the field of ubiquitous robotics and Semantic Web technologies. It introduces a novel approach called the Knowledge-based Auto-configuration Software Robot (Sobot) for Smart Home Environments, which utilises the Sobot to achieve auto-configuration of the system. The research work was conducted under the Distributed Integrated Care Services and Systems (iCARE) project, which was designed to accomplish and deliver integrated distributed ecosystems with a homecare focus. The auto-configuration Sobot which is the focus of this thesis is a key component of the iCARE project. It will become one of the key enabling technologies for generic smart home environments. It has a profound impact on designing and implementing a high quality system. Its main role is to generate a feasible configuration that meets the given requirements using the knowledgebase of the smart home environment as a core component. The knowledgebase plays a pivotal role in helping the Sobot to automatically select the most appropriate resources in a given context-aware system via semantic searching and matching. Ontology as a technique of knowledgebase representation generally helps to design and develop a specific domain. It is also a key technology for the Semantic Web, which enables a common understanding amongst software agents and people, clarifies the domain assumptions and facilitates the reuse and analysis of its knowledge. The main advantages of the Sobot over traditional applications is its awareness of the changing digital and physical environments and its ability to interpret these changes, extract the relevant contextual data and merge any new information or knowledge. The Sobot is capable of creating new or alternative feasible configurations to meet the system’s goal by utilising inferred facts based on the smart home ontological model, so that the system can adapt to the changed environment. Furthermore, the Sobot has the capability to execute the generated reconfiguration plan without interrupting the running of the system. A proof-of-concept testbed has been designed and implemented. The case studies carried out have shown the potential of the proposed approach to achieve flexible and reliable auto-configuration of the smart home system, with promising directions for future research

Enhanced Living Environments

This open access book was prepared as a Final Publication of the COST Action IC1303 “Algorithms, Architectures and Platforms for Enhanced Living Environments (AAPELE)”. The concept of Enhanced Living Environments (ELE) refers to the area of Ambient Assisted Living (AAL) that is more related with Information and Communication Technologies (ICT). Effective ELE solutions require appropriate ICT algorithms, architectures, platforms, and systems, having in view the advance of science and technology in this area and the development of new and innovative solutions that can provide improvements in the quality of life for people in their homes and can reduce the financial burden on the budgets of the healthcare providers. The aim of this book is to become a state-of-the-art reference, discussing progress made, as well as prompting future directions on theories, practices, standards, and strategies related to the ELE area. The book contains 12 chapters and can serve as a valuable reference for undergraduate students, post-graduate students, educators, faculty members, researchers, engineers, medical doctors, healthcare organizations, insurance companies, and research strategists working in this area

Diseño de un sistema domótico de altas prestaciones destinado a viviendas residenciales

La finalidad de este proyecto es obtener el diseño de un sistema de altas prestaciones que permita realizar funciones propias de la domótica con especial énfasis en aquellas funciones relativas a la seguridad. Para realizar todas las funciones necesarias se ha diseñado un sistema con capacidad de procesar audio y video, comunicarse vía Internet, telefonía o SMS y realizar las comunicaciones necesarias en el sistema de forma inalámbrica. En primer lugar se dimensiona el sistema, mostrando un abanico de las funcionalidades más útiles diferenciando entre los ámbitos de seguridad, ahorro de energía, comunicaciones y mejora del confort; con la finalidad de buscar un sistema que cubra las necesidades reales de los usuarios. Realizar todas estas funciones nos conduce a los requisitos que son necesarios en el sistema y se propone un sistema formado por las funciones más usuales, con el fin de poder llegar a ofrecer una solución concreta. Siguiendo la concepción del sistema a nivel teórico, se analizan los diferentes tipos de arquitectura que utilizan la mayoría de sistemas domóticos actuales. Una vez vistas las ventajas y desventajas de las posibles configuraciones, se establece como la arquitectura más adecuada un sistema de tipo centralizado modular. Una vez llegados a este punto, se busca plasmar todo el diseño teórico sobre el soporte hardware más adecuado. Por lo que se analiza una primera posibilidad consistente en utilizar elementos que ya existen en el mercado que nos puedan ser útiles y una segunda posibilidad mediante la fabricación de nuestros propios módulos de comunicación. Estos módulos funcionan de forma inalámbrica y nos permiten conectar un gran número de dispositivos, sin necesidad de realizar la instalación que requieren los sistemas cableados. Mediante el análisis de todos estos elementos, llegamos a obtener dos soluciones claramente diferenciadas, una primera donde prima la fiabilidad respecto al coste total y una segunda, donde la fiabilidad es menor pero el coste se reduce sustancialmente. Entre las dos soluciones planteadas, el sistema de bajo coste se ajusta a nuestros objetivos iniciales, en los cuales se buscaba un sistema barato y que se pudiera introducir en un mercado amplio. Además el sistema de funcionamiento al estar abierto a todo tipo de dispositivos, genera muchas posibilidades de desarrollo con el único inconveniente de mejorar la fiabilidad del conjunto

Combining SOA and BPM Technologies for Cross-System Process Automation

This paper summarizes the results of an industry case study that introduced a cross-system business process automation solution based on a combination of SOA and BPM standard technologies (i.e., BPMN, BPEL, WSDL). Besides discussing major weaknesses of the existing, custom-built, solution and comparing them against experiences with the developed prototype, the paper presents a course of action for transforming the current solution into the proposed solution. This includes a general approach, consisting of four distinct steps, as well as specific action items that are to be performed for every step. The discussion also covers language and tool support and challenges arising from the transformation