On Numerical Analysis in Residue Number Systems

Recent attempts to utilize residue number systems in digital computers have raised numerous questions about adapting the techniques of numerical analysis to residue number systems. Among these questions are the fundamental problems of how to compare the magnitudes of two numbers, how to detect additive and multiplicative overflow, and how to divide in residue number systems. These three problems are treated in separate chapters of this thesis and methods are developed therein whereby magnitude comparison, overflow detection, and division can be performed in residue number systems. In an additional chapter, the division method is extended to provide an algorithm for the direct approximation of square roots in residue number systems. Numerous examples are provided illustrating the nature of the problems considered and showing the use of the solutions presented in practical computations. In a final chapter are presented the results of extensive trial calculations for which a conventional digital computer was programmed to simulate the use of the division and square root algorithms in approximating quotients and square roots in residue number systems. These results indicate that, in practice, these division and square root algorithms usually converge to the quotient or square root somewhat faster than is suggested by the theory

Floating Point Square Root under HUB Format

Unit-Biased (HUB) is an emerging format based on shifting the representation line of the binary numbers by half unit in the last place. The HUB format is specially relevant for computers where rounding to nearest is required because it is performed simply by truncation. From a hardware point of view, the circuits implementing this representation save both area and time since rounding does not involve any carry propagation. Designs to perform the four basic operations have been proposed under HUB format recently. Nevertheless, the square root operation has not been confronted yet. In this paper we present an architecture to carry out the square root operation under HUB format for floating point numbers. The results of this work keep supporting the fact that the HUB representation involves simpler hardware than its conventional counterpart for computers requiring round-to-nearest mode.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Residue Number System Based Building Blocks for Applications in Digital Signal Processing

Předkládaná disertační práce se zabývá návrhem základních bloků v systému zbytkových tříd pro zvýšení výkonu aplikací určených pro digitální zpracování signálů (DSP). Systém zbytkových tříd (RNS) je neváhová číselná soustava, jež umožňuje provádět paralelizovatelné, vysokorychlostní, bezpečné a proti chybám odolné aritmetické operace, které jsou zpracovávány bez přenosu mezi řády. Tyto vlastnosti jej činí značně perspektivním pro použití v DSP aplikacích náročných na výpočetní výkon a odolných proti chybám. Typický RNS systém se skládá ze tří hlavních částí: převodníku z binárního kódu do RNS, který počítá ekvivalent vstupních binárních hodnot v systému zbytkových tříd, dále jsou to paralelně řazené RNS aritmetické jednotky, které provádějí aritmetické operace s operandy již převedenými do RNS. Poslední část pak tvoří převodník z RNS do binárního kódu, který převádí výsledek zpět do výchozího binárního kódu. Hlavním cílem této disertační práce bylo navrhnout nové struktury základních bloků výše zmiňovaného systému zbytkových tříd, které mohou být využity v aplikacích DSP. Tato disertační práce předkládá zlepšení a návrhy nových struktur komponent RNS, simulaci a také ověření jejich funkčnosti prostřednictvím implementace v obvodech FPGA. Kromě návrhů nové struktury základních komponentů RNS je prezentován také podrobný výzkum různých sad modulů, který je srovnává a determinuje nejefektivnější sadu pro různé dynamické rozsahy. Dalším z klíčových přínosů disertační práce je objevení a ověření podmínky určující výběr optimální sady modulů, která umožňuje zvýšit výkonnost aplikací DSP. Dále byla navržena aplikace pro zpracování obrazu využívající RNS, která má vůči klasické binární implementanci nižší spotřebu a vyšší maximální pracovní frekvenci. V závěru práce byla vyhodnocena hlavní kritéria při rozhodování, zda je vhodnější pro danou aplikaci využít binární číselnou soustavu nebo RNS.This doctoral thesis deals with designing residue number system based building blocks to enhance the performance of digital signal processing applications. The residue number system (RNS) is a non-weighted number system that provides carry-free, parallel, high speed, secure and fault tolerant arithmetic operations. These features make it very attractive to be used in high-performance and fault tolerant digital signal processing (DSP) applications. A typical RNS system consists of three main components; the first one is the binary to residue converter that computes the RNS equivalent of the inputs represented in the binary number system. The second component in this system is parallel residue arithmetic units that perform arithmetic operations on the operands already represented in RNS. The last component is the residue to binary converter, which converts the outputs back into their binary representation. The main aim of this thesis was to propose novel structures of the basic components of this system in order to be later used as fundamental units in DSP applications. This thesis encloses improving and designing novel structures of these components, simulating and verifying their efficiency via FPGA implementation. In addition to suggesting novel structures of basic RNS components, a detailed study on different moduli sets that compares and determines the most efficient one for different dynamic range requirements is also presented. One of the main outcomes of this thesis is concluding and verifying the main condition that should be met when choosing a moduli set, in order to improve the timing performance of a DSP application. An RNS-based image processing application is also proposed. Its efficiency, in terms of timing performance and power consumption, is proved via comparing it with a binary-based one. Finally, the main considerations that should be taken into account when choosing to use the binary number system or RNS are also discussed in details.

Self-testing and repairing computer Patent

Self testing and repairing computer comprising control and diagnostic unit and rollback points for error correctio

Sign Detection and Signed Integer Comparison for the 3-Moduli Set {2^n±1,2^(n+k)}

Comparison, division and sign detection are considered complicated operations in residue number system (RNS). A straightforward solution is to convert RNS numbers into binary formats and then perform complicated operations using conventional binary operators. If efficient circuits are provided for comparison, division and sign detection, the application of RNS can be extended to the cases including these operations.For RNS comparison in the 3-moduli set , we have only found one hardware realization. In this paper, an efficient RNS comparator is proposed for the moduli set  which employs sign detection method and operates more efficient than its counterparts. The proposed sign detector and comparator utilize dynamic range partitioning (DRP), which has been recently presented for unsigned RNS comparison. Delay and cost of the proposed comparator are lower than the previous works and makes it appropriate for RNS applications with limited delay and cost

Design and implementation of high-radix arithmetic systems based on the SDNR/RNS data representation

This project involved the design and implementation of high-radix arithmetic systems based on the hybrid SDNRIRNS data representation. Some real-time applications require a real-time arithmetic system. An SDNR/RNS arithmetic system provides parallel, real-time processing. The advantages and disadvantages of high-radix SDNR/RNS arithmetic, and the feasibility of implementing SDNR/RNS arithmetic systems in CMOS VLSI technology, were investigated in this project. A common methodological model, which included the stages of analysis, design, implementation, testing, and simulation, was followed. The combination of the SDNR and RNS transforms potential complex logic networks into simpler logic blocks. It was found that when constructing a SDNRIRNS adder, factors such as the radix, digit set, and moduli must be taken into account. There are many avenues still to explore. For example, implementing other arithmetic systems in the same CMOS VLSI technology used in this project and comparing them to equivalent SDNR/RNS systems would provide a set of benchmarks. These benchmarks would be useful in addressing issues relating to relative performance

A Survey on the Best Choice for Modulus of Residue Code

Nowadays, the development of technology and the growing need for dense and complex chips have led chip industries to increase their attention on the circuit testability. Also, using the electronic chips in certain industries, such as the space industry, makes the design of fault tolerant circuits a challenging issue. Coding is one of the most suitable methods for error detection and correction. The residue code, as one of the best choices for error detection aims, is wildly used in large arithmetic circuits such as multiplier and also finds a wide range of applications in processors and digital filters. The modulus value in this technique directly effect on the area overhead parameter. A large area overhead is one of the most important disadvantages especially for testing the small circuits. The purpose of this paper is to study and investigate the best choice for residue code check base that is used for simple and small circuits such as a simple ripple carry adder. The performances are evaluated by applying stuck-at-faults and transition-faults by simulators. The efficiency is defined based on fault coverage and normalized area overhead. The results show that the modulus 3 with 95% efficiency provided the best result. Residue code with this modulus for checking a ripple carry adder, in comparison with duplex circuit, 30% improves the efficiency

Implementing IIR filters via residue number systems.

by Tai Leong Charn.Bibliography: leaves R-i-iiiThesis (M.Phil.)--Chinese University of Hong Kong, 198