Sub-micron technology development and system-on-chip (Soc) design - data compression core

Data compression removes redundancy from the source data and thereby increases storage capacity of a storage medium or efficiency of data transmission in a communication link. Although several data compression techniques have been implemented in hardware, they are not flexible enough to be embedded in more complex applications. Data compression software meanwhile cannot support the demand of high-speed computing applications. Due to these deficiencies, in this project we develop a parameterized lossless universal data compression IP core for high-speed applications. The design of the core is based on the combination of Lempel-Ziv-Storer-Szymanski (LZSS) compression algorithm and Huffman coding. The resulting IP core offers a data-independent throughput that can process a symbol in every clock cycle. The design is described in parameterized VHDL code to enable a user to make a suitable compromise between resource constraints, operation speed and compression saving, so that it can be adapted for any target application. In implementation on Altera FLEX10KE FPGA device, the design offers a performance of 800 Mbps with an operating frequency of 50 MHz. This IP core is suitable for high-speed computing applications or for storage systems

SEPARATING INSTRUCTION FETCHES FROM MEMORY ACCESSES : ILAR (INSTRUCTION LINE ASSOCIATIVE REGISTERS)

Due to the growing mismatch between processor performance and memory latency, many dynamic mechanisms which are “invisible” to the user have been proposed: for example, trace caches and automatic pre-fetch units. However, these dynamic mechanisms have become inadequate due to implicit memory accesses that have become so expensive. On the other hand, compiler-visible mechanisms like SWAR (SIMD Within A Register) and LARs (Line Associative Registers) are potentially more effective at improving data access performance. This thesis investigates applying the same ideas to improve instruction access. ILAR (Instruction LARs) store instructions in wide registers. Instruction blocks are explicitly loaded into ILAR, using block compression to enhance memory bandwidth. The control flow of the program then refers to instructions directly by their position within an ILAR, rather than by lengthy memory addresses. Because instructions are accessed directly from within registers, there is no implicit instruction fetch from memory. This thesis proposes an instruction set architecture for ILAR, investigates a mechanism to load ILAR using the best available block compression algorithm and also develop hardware descriptions for both ILAR and a conventional memory cache model so that performance comparisons could be made on the instruction fetch stage

Robust Header Compression (ROHC) in Next-Generation Network Processors

Robust Header Compression (ROHC) provides for more efficient use of radio links for wireless communication in a packet switched network. Due to its potential advantages in the wireless access area andthe proliferation of network processors in access infrastructure, there exists a need to understand the resource requirements and architectural implications of implementing ROHC in this environment. We presentan analysis of the primary functional blocks of ROHC and extract the architectural implications on next-generation network processor design for wireless access. The discussion focuses on memory space andbandwidth dimensioning as well as processing resource budgets. We conclude with an examination of resource consumption and potential performance gains achievable by offloading computationally intensiveROHC functions to application specific hardware assists. We explore the design tradeoffs for hardware as-sists in the form of reconfigurable hardware, Application-Specific Instruction-set Processors (ASIPs), andApplication-Specific Integrated Circuits (ASICs)

Design and FPGA Implementation of High Speed DWT-IDWT Architecture with Pipelined SPIHT Architecture for Image Compression

Image compression demands high speed architectures for transformation and encoding process Medical image compression demands lossless compression schemes and faster architectures A trade-off between speed and area decides the complexity of image compression algorithms In this work a high speed DWT architecture and pipelined SPIHT architecture is designed modeled and implemented on FPGA platform DWT computation is performed using matrix multiplication operation and is implemented on Virtex-5 FPGA that consumes less than 1 of the hardware resource The SPIHT algorithm that is performed using pipelined architecture and hence achieves higher throughput and latency The SPIHT algorithm operates at a frequency of 260 MHz and occupies area less than 15 of the resources The architecture designed is suitable for high speed image compression application

Lossy and Lossless Compression Techniques to Improve the Utilization of Memory Bandwidth and Capacity

Main memory is a critical resource in modern computer systems and is in increasing demand. An increasing number of on-chip cores and specialized accelerators improves the potential processing throughput but also calls for higher data rates and greater memory capacity. In addition, new emerging data-intensive applications further increase memory traffic and footprint. On the other hand, memory bandwidth is pin limited and power constrained and is therefore more difficult to scale. Memory capacity is limited by cost and energy considerations.This thesis proposes a variety of memory compression techniques as a means to reduce the memory bottleneck. These techniques target two separate problems in the memory hierarchy: memory bandwidth and memory capacity. In order to reduce transferred data volumes, lossy compression is applied which is able to reach more aggressive compression ratios. A reduction of off-chip memory traffic leads to reduced memory latency, which in turn improves the performance and energy efficiency of the system. To improve memory capacity, a novel approach to memory compaction is presented.The first part of this thesis introduces Approximate Value Reconstruction (AVR), which combines a low-complexity downsampling compressor with an LLC design able to co-locate compressed and uncompressed data. Two separate thresholds limit the error introduced by approximation. For applications that tolerate aggressive approximation in large fractions of their data, in a system with 1GB of 1600MHz DDR4 per core and 1MB of LLC space per core, AVR reduces memory traffic by up to 70%, execution time by up to 55%, and energy costs by up to 20% introducing at most 1.2% error in the application output.The second part of this thesis proposes Memory Squeeze (MemSZ), introducing a parallelized implementation of the more advanced Squeeze (SZ) compression method. Furthermore, MemSZ improves on the error limiting capability of AVR by keeping track of life-time accumulated error. An alternate memory compression architecture is also proposed, which utilizes 3D-stacked DRAM as a last-level cache. In a system with 1GB of 800MHz DDR4 per core and 1MB of LLC space per core, MemSZ improves execution time, energy and memory traffic over AVR by up to 15%, 9%, and 64%, respectively.The third part of the thesis describes L2C, a hybrid lossy and lossless memory compression scheme. L2C applies lossy compression to approximable data, and falls back to lossless if an error threshold is exceeded. In a system with 4GB of 800MHz DDR4 per core and 1MB of LLC space per core, L2C improves on the performance of MemSZ by 9%, and energy consumption by 3%.The fourth and final contribution is FlatPack, a novel memory compaction scheme. FlatPack is able to reduce the traffic overhead compared to other memory compaction systems, thus retaining the bandwidth benefits of compression. Furthermore, FlatPack is flexible to changes in block compressibility both over time and between adjacent blocks. When available memory corresponds to 50% of the application footprint, in a system with 4GB of 800MHz DDR4 per core and 1MB of LLC space per core, FlatPack increases system performance compared to current state-of-the-art designs by 36%, while reducing system energy consumption by 12%

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

FPGA based technical solutions for high throughput data processing and encryption for 5G communication: A review

The field programmable gate array (FPGA) devices are ideal solutions for high-speed processing applications, given their flexibility, parallel processing capability, and power efficiency. In this review paper, at first, an overview of the key applications of FPGA-based platforms in 5G networks/systems is presented, exploiting the improved performances offered by such devices. FPGA-based implementations of cloud radio access network (C-RAN) accelerators, network function virtualization (NFV)-based network slicers, cognitive radio systems, and multiple input multiple output (MIMO) channel characterizers are the main considered applications that can benefit from the high processing rate, power efficiency and flexibility of FPGAs. Furthermore, the implementations of encryption/decryption algorithms by employing the Xilinx Zynq Ultrascale+MPSoC ZCU102 FPGA platform are discussed, and then we introduce our high-speed and lightweight implementation of the well-known AES-128 algorithm, developed on the same FPGA platform, and comparing it with similar solutions already published in the literature. The comparison results indicate that our AES-128 implementation enables efficient hardware usage for a given data-rate (up to 28.16 Gbit/s), resulting in higher efficiency (8.64 Mbps/slice) than other considered solutions. Finally, the applications of the ZCU102 platform for high-speed processing are explored, such as image and signal processing, visual recognition, and hardware resource management

Analysis, Optimization & Execution of General Purpose Multimedia Applications on subword VLIW Datapaths

To be added later..