AC mains synchronization loop for precalculated-based PFC converters using the output voltage measure

Common implementations of power factor correction include sensors for the input and output voltages and the input current. Many alternatives have been considered to reduce the number of sensors, especially the current sensor. One strategy is to precalculate the duty cycles that must be applied to every ac main, so the system only needs to synchronize them with the input voltage, and include a simple output voltage loop. The main problem with this approach is the sensibility to any synchronization error, because the input current is not measured, so its evolution is not continuously corrected. This paper shows how the synchronization error alters the current and the power factor, and it proposes several methods to detect and correct this error. All methods use the output voltage ADC, which is already used to control the output voltage, so the cost of the system is not increased. This technique can also be applied to any current sensorless PFC converter, because they are usually affected by leading or lagging currents, so the synchronization can be modified to reduce these effects. Results show that the implementation of this synchronization loop keeps a high-power factor under a wide synchronization error range, while the added logic is not significant.This research was funded by Spanish Ministerio de Economía y Competitividad grant number TEC2013-43017-R

Nonlinear Cascaded Control for a DC-DC Boost Converter

The Boost Converter is a type of DC-DC converter that operates using switching techniques and is designed to elevate the voltage level. This paper presents a cascaded control for a boost converter to ensure that the inductor current and output capacitor voltage remain in a safe operating zone. Ensuring safe operating conditions and stable closed-loop poles is crucial because it guarantees that both current and voltage remain within the designated operating range. This preventive measure prevents any damage to components like capacitors (C), inductors (L), and switches. Unstable operation, on the other hand, could lead to oscillations and an undesirable increase in the amplitude of current and voltage, posing a risk to all components involved. The research contribution involves an investigation of cascaded control, utilizing power and energy concepts due to their advantageous effects on system performance and design. By implementing nonlinear controllers based on a large-signal averaged model, the closed-loop poles remain independent of operating points, eliminating the need for small-signal linearization. Small-signal linearization makes the controlled system dependent on the operating point. Two controllers are introduced based on power and energy concept, which is easy to understand. The potential practical application of the proposed cascaded control approach is in high-power applications. Tracking the energy stored in the output capacitor is first investigated to validate the proposed control scheme by varying the output voltage reference from 32 V to 50 V. Then, the regulation of the energy voltage is explored by varying the load resistance for the output voltage at 50 V. Both are done using a switched model using MATLAB/Simulink software. Simulation results are given to demonstrate the effectiveness of the proposed method. The key metrics used to assess the effectiveness of the proposed control scheme are the undershoot voltage and robustness. The results show that the studied system's tracking, regulating operations and robustness properties are as expected. The proposed method faces a challenge with the number of sensors required. To address this, observers can be utilized to reduce sensor usage while maintaining measurement accuracy. The proposed method can be applied to other power electronic systems

Implementation of a Cascade Fault Tolerant Control and Fault Diagnosis Design for a Modular Power Supply

The main objective of this research work was to develop reliable and intelligent power sources for the future. To achieve this objective, a modular stand-alone solar energy-based direct current (DC) power supply was designed and implemented. The converter topology used is a two-stage interleaved boost converter, which is monitored in closed loop. The diagnosis method is based on analytic redundancy relations (ARRs) deduced from the bond graph (BG) model, which can be used to detect the failures of power switches, sensors, and discrete components such as the output capacitor. The proposed supervision scheme including a passive fault-tolerant cascade proportional integral sliding mode control (PI-SMC) for the two-stage boost converter connected to a solar panel is suitable for real applications. Most model-based diagnosis approaches for power converters typically deal with open circuit and short circuit faults, but the proposed method offers the advantage of detecting the failures of other vital components. Practical experiments on a newly designed and constructed prototype, along with simulations under PSIM software, confirm the efficiency of the control scheme and the successful recovery of a faulty stage by manual isolation. In future work, the automation of this reconfiguration task could be based on the successful simulation results of the diagnosis method.This research was funded by the Tunisian Ministry of Higher Education and Scientific Research

Inversion-Based Approach for Detection and Isolation of Faults in Switched Linear Systems

This paper addresses the problem of the left inversion of switched linear systems from a diagnostics perspective. The problem of left inversion is to reconstruct the input of a system with the knowledge of its output, whose differentiation is usually required. In the case of this work, the objective is to reconstruct the system’s unknown inputs, based on the knowledge of its outputs, switching sequence and known inputs. With the inverse model of the switched linear system, a real-time Fault Detection and Isolation (FDI) algorithm with an integrated Fuzzy Logic System (FLS) that is capable of detecting and isolating abrupt faults occurring in the system is developed. In order to attenuate the effects of unknown disturbances and noise at the output of the inverse model, a smoothing strategy is also used. The results are illustrated with an example. The performance of the method is validated experimentally in a dc-dc boost converter, using a low-cost microcontroller, without any additional components.This work was funded by FCT—Fundação para a Ciência e a Tecnologia, within the project SAICTPAC/0004/2015—POCI-01-0145-FEDER-016434.info:eu-repo/semantics/publishedVersio

A current-source DC-AC converter and control strategy for grid-connected PV applications

This paper presents a two-stage current-source DC-AC converter for grid-connected PV applications which is composed of an input step-up stage, followed by a step-down stage and an unfolding inverter. A decentralized control strategy of the DC-DC stage allows maximizing the renewable energy harvest using an Incremental Conductance MPPT algorithm and synthesizing an output current to be injected into the grid with low harmonic distortion. Double-loop PI controllers are used for the boost stage. The DC bus voltage of the buck stage is regulated using a PI controller, and an inner Proportional-Resonant (PR) controller tracks a sinusoidal reference. The PR controller proposed in this paper, includes a reduced number of resonant stages meeting the energy quality required by standards, which results in good stability margins. Finally, a SOGI-FLL algorithm synchronizes the inverter operation with the grid. Experimental results show an excellent dynamic response of the system, and the injected current complies with the IEEE Std. 1547–2018 specifications regarding harmonic content using a control law with a low computational burden.Fil: Buzzio, Christian. Universidad Nacional de Río Cuarto. Facultad de Ingeniería. Grupo de Electrónica Aplicada; Argentina. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; ArgentinaFil: Poloni, Yamil Sergio. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; ArgentinaFil: Oggier, Germán Elías. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; ArgentinaFil: García, Guillermo Osvaldo. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; Argentin

Active Neutral Point-Clamped Five-Level Inverter With Single-Stage Dynamic Voltage Boosting Capability

The circuit performance of conventional active neutral point-clamped (ANPC) inverter is widely accepted in many renewable energy-based applications like photovoltaic (PV) or electric vehicle grid-connected systems. This is mainly because of its excellent characteristics in terms of voltage/current stress profile of the switches, bidirectional power flow capability, and efficient operation. Nonetheless, due to its half-dc link voltage utilization in the ac output voltage, another power processing stage with additional active and passive elements is required to make its output voltage compatible with the grid when low and wide varying input dc source is available. In this paper, a novel ANPC-based five-level (ANPC5L) inverter with a single-stage boost-integrated circuit design is presented. The proposed topology is able to make the peak output voltage of the conventional ANPC5L inverter followed by a front-end bidirectional boost converter double using the same number of power switches but with less total standing voltage across semiconductors. The working principles of the proposed topology is discussed. Experimental results obtained from 1.3 kW laboratory-built prototype under the grid-connected condition are also given to support the discussion

Design and Advanced Model Predictive Control of Wide Bandgap Based Power Converters

The field of power electronics (PE) is experiencing a revolution by harnessing the superior technical characteristics of wide-band gap (WBG) materials, namely Silicone Carbide (SiC) and Gallium Nitride (GaN). Semiconductor devices devised using WBG materials enable high temperature operation at reduced footprint, offer higher blocking voltages, and operate at much higher switching frequencies compared to conventional Silicon (Si) based counterpart. These characteristics are highly desirable as they allow converter designs for challenging applications such as more-electric-aircraft (MEA), electric vehicle (EV) power train, and the like. This dissertation presents designs of a WBG based power converters for a 1 MW, 1 MHz ultra-fast offboard EV charger, and 250 kW integrated modular motor drive (IMMD) for a MEA application. The goal of these designs is to demonstrate the superior power density and efficiency that are achievable by leveraging the power of SiC and GaN semiconductors. Ultra-fast EV charging is expected to alleviate the challenge of range anxiety , which is currently hindering the mass adoption of EVs in automotive market. The power converter design presented in the dissertation utilizes SiC MOSFETs embedded in a topology that is a modification of the conventional three-level (3L) active neutral-point clamped (ANPC) converter. A novel phase-shifted modulation scheme presented alongside the design allows converter operation at switching frequency of 1 MHz, thereby miniaturizing the grid-side filter to enhance the power density. IMMDs combine the power electronic drive and the electric machine into a single unit, and thus is an efficient solution to realize the electrification of aircraft. The IMMD design presented in the dissertation uses GaN devices embedded in a stacked modular full-bridge converter topology to individually drive each of the motor coils. Various issues and solutions, pertaining to paralleling of GaN devices to meet the high current requirements are also addressed in the thesis. Experimental prototypes of the SiC ultra-fast EV charger and GaN IMMD were built, and the results confirm the efficacy of the proposed designs. Model predictive control (MPC) is a nonlinear control technique that has been widely investigated for various power electronic applications in the past decade. MPC exploits the discrete nature of power converters to make control decisions using a cost function. The controller offers various advantages over, e.g., linear PI controllers in terms of fast dynamic response, identical performance at a reduced switching frequency, and ease of applicability to MIMO applications. This dissertation also investigates MPC for key power electronic applications, such as, grid-tied VSC with an LCL filter and multilevel VSI with an LC filter. By implementing high performance MPC controllers on WBG based power converters, it is possible to formulate designs capable of fast dynamic tracking, high power operation at reduced THD, and increased power density