An investigation on detonator triggering effect subjected to radio frequency energy exposure

No Abstract. Keywords: blast; premature detonation; explosive; radio frequency energ

Sistema inalámbrico de adquisición de datos en tiempo real para la caracterización aerodinámica de una turbina eólica

Context:  Wind energy sources utilize renewable, free, and environmentally friendly resources, so there are projects focused on the design of wind turbines to increase their efficiency. Simulations using computational fluid dynamics techniques allow designs to be analyzed. which, are then validated through experimentation and wind tunnel measurements. Method: Data acquisition is performed by using Wind Sensor Rev.P sensors to measure wind velocity, and MMA7361 accelerometer to measure the vibrations generated by the wind in the turbine. Additionally, an ESP32 is required to process and transmit the data via Bluetooth, thus facilitating the installation of the real-time monitoring module inside the wind tunnel. Results: A monitoring module with a sampling rate of 5 ms was obtained, thus allowing real-time data acquisition, with a resolution of 12 bits for good data capturing accuracy and a transmission rate of approximately 74000 bps. An application capable of plotting 3D acceleration and 2D wind speed signals was also created. Conclusions: The device developed serves as a support for future wind turbine design projects since it is wireless, its installation is simple, it facilitates data collection inside a wind tunnel, and it allows visualizing the turbine’s behavior in real time by means of a graphic interface.Contexto: Las fuentes de energía eólica aprovechan recursos renovables, gratuitos y respetuosos con el medioambiente, por lo cual existen proyectos enfocados en diseñar turbinas eólicas para aumentar su eficiencia. Las simulaciones mediante técnicas de dinámica de fluidos computacionales permiten analizar diseños, los cuales son luego validados mediante experimentación y mediciones en túneles de viento. Método: La adquisición de datos se realiza mediante el uso de los sensores Wind Sensor Rev.P para medir la velocidad del viento y del acelerómetro MMA7361 para medir las vibraciones generadas por el viento en la turbina. Adicionalmente se requiere una ESP32 para procesar y transmitir los datos mediante Bluetooth, facilitando la instalación del módulo de monitoreo en tiempo real dentro del túnel de viento. Resultados: Se obtuvo un módulo de monitoreo con una frecuencia de muestreo de 5 ms, lo que permite la adquisición de los datos en tiempo real, con una resolución de 12 bits para una buena precisión en la toma de datos y una velocidad de transmisión de aproximadamente 74000 bits por segundo. También se creó una aplicación capaz de graficar las señales de aceleración en 3D y velocidad del viento en 2D. Conclusiones: El dispositivo desarrollado sirve como soporte para futuros proyectos de diseño de aerogeneradores, ya que es inalámbrico, su instalación es sencilla, facilita la recolección de datos dentro de un túnel de viento y permite visualizar el comportamiento de la turbina en tiempo real mediante una interfaz gráfica

Energy harvesting of low-grade waste heat with colloid based technology

L'abstract è presente nell'allegato / the abstract is in the attachmen

Three-tier wireless sensor network infrastructure for environmental monitoring

Doctor of PhilosophyDepartment of Biological & Agricultural EngineeringNaiqian ZhangA two-tier wireless data communication system was developed to remotely monitor sediment concentration in streams in real time. The system used wireless motes and other devices to form a wireless sensor network to acquire data from multiple sensors. The system also used a Stargate, a single-board computer, as a gateway to manage and control data flow and wireless data transfer. The sensor signals were transmitted from an AirCard on the Stargate to an Internet server through the General Packet Radio Service (GPRS) provided by a commercial GSM cellular carrier. Various types of antennas were used to boost the signal level in a radio-hostile environment. Both short- and long-distance wireless data communications were achieved. Power supplies for the motes, Stargate, and AirCard were improved for reliable and robust field applications. The application software was developed using Java, C, nesC, LabView, and SQL to ensure seamless data transfer and enable both on-site and remote monitoring. Remote field tests were carried out at different locations with different GPRS signal strengths and a variety of landscapes. A three-tier wireless sensor network was then developed and deployed at three military installations around the country – Fort Riley in Kansas, Fort Benning in Georgia, and Aberdeen Proving Ground in Maryland - to remotely monitor sediment concentration and movement in real time. Sensor nodes, gateway stations, repeater stations, and central stations were strategically deployed to insure reliable signal transmissions. Radio signal strength was tested to analyze effects of distance, vegetation, and topographical barriers. Omni- and Yagi-directional antennas with different gains were tested to achieve robust, long-range communication in a wireless-hostile environment. Sampling times of sensor nodes within a local sensor network were synchronized at the gateway station. Error detection algorithms were developed to detect errors caused by interference and other impairments of the transmission path. GSM and CDMA cellular modems were used at different locations based on cellular coverage. Data were analyzed to verify the effectiveness and reliability of the three-tier WSN

Recent Advances in Wireless Communications and Networks

This book focuses on the current hottest issues from the lowest layers to the upper layers of wireless communication networks and provides "real-time" research progress on these issues. The authors have made every effort to systematically organize the information on these topics to make it easily accessible to readers of any level. This book also maintains the balance between current research results and their theoretical support. In this book, a variety of novel techniques in wireless communications and networks are investigated. The authors attempt to present these topics in detail. Insightful and reader-friendly descriptions are presented to nourish readers of any level, from practicing and knowledgeable communication engineers to beginning or professional researchers. All interested readers can easily find noteworthy materials in much greater detail than in previous publications and in the references cited in these chapters

NASA Tech Briefs, October 2002

Topics include: a technology focus on sensors, electronic components and systems, software, materials, materials, mechanics, manufacturing, physical sciences, information sciences, book and reports, motion control and a special section of Photonics Tech Briefs

Acoustics for underwater neutrino telescopes

En esta tesis se tratan diferentes aspectos de la acústica presente en un telescopio submarino de neutrinos, principalmente en dos vertientes: en el sistema de posicionamiento acústico utilizado para la monitorización de las posiciones de los módulos ópticos presentes a lo largo del detector, así como en sistemas para detección acústica de neutrinos, técnica que actualmente está en fase de estudio. Todos los estudios realizados están enmarcados dentro de dos colaboraciones europeas para el diseño, construcción y operación de telescopios submarinos de neutrinos: Antares (en fase de operación) y KM3NET (en fase de diseño). Objetivos. Los objetivos de este trabajo pueden resumirse en los siguientes aspectos: - Estudios y análisis del sistema de posicionamiento acústico de Antares. Desarrollo del software para la para la automatización del procesado de los datos de dicho sistema e incorporación de los resultados en la base de datos del experimento. Análisis de los datos proporcionados por dicho sistema con el fin de validar su correcto funcionamiento. - Diseño y desarrollo del sistema de posicionamiento acústico para KM3NeT, telescopio unas 20 veces más grande que Antares. - Estudios para la evaluación de la generación acústica paramétrica para el desarrollo de un calibrador compacto capaz de generar señales tipo neutrino útiles en sistemas de detección acústica. Elementos de la metodología a destacar. Cabe destacar aquí que el trabajo se ha desarrollado en el marco de dos colaboraciones internacionales: ANTARES y KM3NeT, financiados con fondos europeos y nacionales. Por su contexto y el carácter de las actividades realizadas ha sido necesaria la formación en distintos campos: telescopios de neutrinos y astropartículas, pero también en otras áreas como la acústica submarina. Además, se ha desarrollado diversas capacidades y destrezas en diversos ámbitos: en instrumentación, en aplicaciones informáticas, en análisis de datos, etc. Más concretamente, se ha trabajado en aplicaciones informáticas para los desarrollos y análisis en ANTARES.Bou Cabo, M. (2011). Acoustics for underwater neutrino telescopes [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/10989Palanci

Energy Efficiency

This book is one of the most comprehensive and up-to-date books written on Energy Efficiency. The readers will learn about different technologies for energy efficiency policies and programs to reduce the amount of energy. The book provides some studies and specific sets of policies and programs that are implemented in order to maximize the potential for energy efficiency improvement. It contains unique insights from scientists with academic and industrial expertise in the field of energy efficiency collected in this multi-disciplinary forum

2014 Abstract Booklet

Complete Schedule of Events for the 16th Annual Undergraduate Research Symposium at Minnesota State University, Mankato