Soft information based protocols in network coded relay networks

Future wireless networks aim at providing higher quality of service (QoS) to mobile users. The emergence of relay technologies has shed light on new methodologies through which the system capacity can be dramatically increased with low deployment cost. In this thesis, novel relay technologies have been proposed in two practical scenarios: wireless sensor networks (WSN) and cellular networks. In practical WSN designs, energy conservation is the single most important requirement. This thesis draws attention to a multiple access relay channels model in the WSN. The network coded symbol for the received signals from correlated sources has been derived; the network coded symbol vector is then converted into a sparse vector, after which a compressive sensing (CS) technique is applied over the sparse signals. A theoretical proof analysis is derived regarding the reliability of the network coded symbol formed in the proposed protocol. The proposed protocol results in a better bit error rate (BER) performance in comparison to the direct implementation of CS on the EF protocol. Simulation results validate our analyses. Another hot topic is the application of relay technologies to the cellular networks. In this thesis, a practical two-way transmission scheme is proposed based on the EF protocol and the network coding technique. A trellis coded quantization/modulation (TCQ/M) scheme is used in the network coding process. The soft network coded symbols are quantized into only one bit thus requiring the same transmission bandwidth as the simplest decode-and-forward protocol. The probability density function of the network coded symbol is derived to help to form the quantization codebook for the TCQ. Simulations show that the proposed soft forwarding protocol can achieve full diversity with only a transmission rate of 1, and its BER performance is equivalent to that of an unquantized EF protocol

Soft information based protocols in network coded relay networks

Future wireless networks aim at providing higher quality of service (QoS) to mobile users. The emergence of relay technologies has shed light on new methodologies through which the system capacity can be dramatically increased with low deployment cost. In this thesis, novel relay technologies have been proposed in two practical scenarios: wireless sensor networks (WSN) and cellular networks. In practical WSN designs, energy conservation is the single most important requirement. This thesis draws attention to a multiple access relay channels model in the WSN. The network coded symbol for the received signals from correlated sources has been derived; the network coded symbol vector is then converted into a sparse vector, after which a compressive sensing (CS) technique is applied over the sparse signals. A theoretical proof analysis is derived regarding the reliability of the network coded symbol formed in the proposed protocol. The proposed protocol results in a better bit error rate (BER) performance in comparison to the direct implementation of CS on the EF protocol. Simulation results validate our analyses. Another hot topic is the application of relay technologies to the cellular networks. In this thesis, a practical two-way transmission scheme is proposed based on the EF protocol and the network coding technique. A trellis coded quantization/modulation (TCQ/M) scheme is used in the network coding process. The soft network coded symbols are quantized into only one bit thus requiring the same transmission bandwidth as the simplest decode-and-forward protocol. The probability density function of the network coded symbol is derived to help to form the quantization codebook for the TCQ. Simulations show that the proposed soft forwarding protocol can achieve full diversity with only a transmission rate of 1, and its BER performance is equivalent to that of an unquantized EF protocol

Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey

Wireless sensor networks (WSNs) consist of autonomous and resource-limited devices. The devices cooperate to monitor one or more physical phenomena within an area of interest. WSNs operate as stochastic systems because of randomness in the monitored environments. For long service time and low maintenance cost, WSNs require adaptive and robust methods to address data exchange, topology formulation, resource and power optimization, sensing coverage and object detection, and security challenges. In these problems, sensor nodes are to make optimized decisions from a set of accessible strategies to achieve design goals. This survey reviews numerous applications of the Markov decision process (MDP) framework, a powerful decision-making tool to develop adaptive algorithms and protocols for WSNs. Furthermore, various solution methods are discussed and compared to serve as a guide for using MDPs in WSNs

Analysis and Design of Non-Orthogonal Multiple Access (NOMA) Techniques for Next Generation Wireless Communication Systems

The current surge in wireless connectivity, anticipated to amplify significantly in future wireless technologies, brings a new wave of users. Given the impracticality of an endlessly expanding bandwidth, there’s a pressing need for communication techniques that efficiently serve this burgeoning user base with limited resources. Multiple Access (MA) techniques, notably Orthogonal Multiple Access (OMA), have long addressed bandwidth constraints. However, with escalating user numbers, OMA’s orthogonality becomes limiting for emerging wireless technologies. Non-Orthogonal Multiple Access (NOMA), employing superposition coding, serves more users within the same bandwidth as OMA by allocating different power levels to users whose signals can then be detected using the gap between them, thus offering superior spectral efficiency and massive connectivity. This thesis examines the integration of NOMA techniques with cooperative relaying, EXtrinsic Information Transfer (EXIT) chart analysis, and deep learning for enhancing 6G and beyond communication systems. The adopted methodology aims to optimize the systems’ performance, spanning from bit-error rate (BER) versus signal to noise ratio (SNR) to overall system efficiency and data rates. The primary focus of this thesis is the investigation of the integration of NOMA with cooperative relaying, EXIT chart analysis, and deep learning techniques. In the cooperative relaying context, NOMA notably improved diversity gains, thereby proving the superiority of combining NOMA with cooperative relaying over just NOMA. With EXIT chart analysis, NOMA achieved low BER at mid-range SNR as well as achieved optimal user fairness in the power allocation stage. Additionally, employing a trained neural network enhanced signal detection for NOMA in the deep learning scenario, thereby producing a simpler signal detection for NOMA which addresses NOMAs’ complex receiver problem

Communication coopérative, codage distribué, réseaux sans fil de relais

With the rapid growth of wireless technologies, devices and mobile applications, the quest of high throughput and omnipresent connectivity in wireless networks increases rapidly as well. It is well known that cooperation increases significantly the spectral efficiency (coding gain) and the reliability (diversity gain) of the transmission between the nodes. The concept of cooperation in wireless relays network is still one of the most active research topics in wireless communication, scientists are still searching for the optimal cooperation strategies that make the possible gains at the maximum. Cooperation results when nodes in a network share their power and/or bandwidth resources to mutually enhance their transmissions and receptions. In wireless relay networks, the relays are special nodes that are used to improve the quality of communication between the source nodes and the destination nodes. In particular, the use of relays guarantees more efficient and reliable networks. In this work, we focus on a special wireless relay network where a set of sources (mobiles) want to communicate their messages to a common destination (base station) with the help of a set of relaysAt the beginning of this work, we focused on the cooperative scheme where the relay, after a fixed portion of time, tries to understand (decode) the source’s messages and forwards helpful signals for the correctly decoded ones. One of the limitations of the previous cooperative scheme is the fixe listening time of the relays, which cannot be adapted to the quality of the instantaneous sources-relays links. To solve this problem we propose a more advanced cooperative scheme where the listening time of each relay can be dynamic and not fixed in advanced. So the relay that has strong links with the sources can start cooperating earlier than the other relays with weak links. Currently, we are investigating other directions of possible improvements, for example, how can we use feedback signals to improve the efficiency of the network.Avec la croissance rapide des appareils et des applications mobiles, les besoins en débit et en connectivité dans les réseaux sans fil augmentent rapidement. Il est prouvé que les communications coopératives peuvent augmenter significativement l’efficacité spectrale et la fiabilité des transmissions entre les nœuds extrémaux. Le concept de coopération dans un réseau sans fil compte parmi les sujets de recherche les plus actifs en télécommunications, le but étant d'identifier les stratégies de coopération qui maximiseraient les gains en efficacité spectrale et en puissance d'émission. Pour coopérer, les nœuds du réseau partagent leurs ressources (énergie, bande de fréquence, etc. ...) pour améliorer mutuellement leurs transmissions et leurs réceptions. Dans les réseaux sans fil avec relais, les relais sont des nœuds dédiés à améliorer la qualité de la communication entre les nœuds sources et destination.Dans la première partie de la thèse, nous nous concentrons sur un réseau sans fil avec relais spécifique où l'ensemble de sources (mobiles) veulent communiquer leurs messages à une destination commune (station de base) avec l'aide d'un ensemble de relais (contexte cellulaire, sens montant). Nous étudions, sur les plans théorique et pratique, un schéma coopératif dans lequel les relais, après une durée d'écoute fixée a priori, essayent de décoder les messages des sources et commencent à transmettre des signaux utiles pour ceux qui sont décodés correctement. Ces signaux utiles sont le résultat d'un codage canal-réseau conjoint.Une des limitations du système coopératif précédent est précisément que le temps d'écoute des relais est figé et ne peut pas être adapté à la qualité fluctuante (aléatoire) des liens instantanés sources-relais. Pour pallier cette difficulté, nous proposons et analysons, dans une seconde partie de la thèse, un schéma de coopération plus avancé où le temps d'écoute de chaque relais peut être dynamique. Dans ces conditions, un relais bénéficiant d'une meilleure qualité de réception des sources peut commencer à coopérer plus tôt que d'autres relais ayant une qualité de réception moindre.Enfin, dans la troisième et dernière partie de la thèse, nous considérons la présence d'une information de retour limitée (limited feedback) entre la destination et les sources et les relais, et tentons de caractériser l'efficacité spectrale d'un tel système

Towards Massive Connectivity Support for Scalable mMTC Communications in 5G networks

The fifth generation of cellular communication systems is foreseen to enable a multitude of new applications and use cases with very different requirements. A new 5G multiservice air interface needs to enhance broadband performance as well as provide new levels of reliability, latency and supported number of users. In this paper we focus on the massive Machine Type Communications (mMTC) service within a multi-service air interface. Specifically, we present an overview of different physical and medium access techniques to address the problem of a massive number of access attempts in mMTC and discuss the protocol performance of these solutions in a common evaluation framework