Modern VLSI Analogue Filter Design: Methodology and Software Development

This thesis describes various approaches for the design of modern analogue filters and provides a practical filter and equaliser design aids system XFILT. The thesis begins by placing the analogue filter design technique and software into a historical and technology perspective. The evolution of the analogue filter is traced from early work, through the passive-RLC to transconductor-C and switched-current realisations. The software development in VLSI analogue filter automation is reviewed. For SC filter design, a cascade SC design approach which includes a novel pole-zero pairing method and a comprehensive comparison of SC filter realisation using different biquads are presented. Very useful guidelines for the choice of a suitable biquad structure according to the nature of the filter problem are presented. The canonical realisations of SC filter are studied. The multirate SC system design is described. Several strategies and the algorithms for multirate SC system design are proposed. In transconductor-C filter design research, the definition of a canonical ladder based transconductor-C filter is introduced, and two canonical ladder based transconductor-C filter design approaches are proposed. The ladder based transconductor-C equaliser design is also discussed. A practical video frequency transconductor-C filter and equaliser design is given to demonstrate the utility of the matrix design method and the design software. A new approach to realise exact ladder based SI filter with first and second generation memory cell has been proposed. The bilinear transformation is used in the design procedure. Eight different SI ladder based structures can be obtained for one prototype ladder. Therefore it provides SI filter designers with various circuit choices based on different requirement such as area, maximum ratio of transistor aspect ratio limit, sensitivity or noise performance. Techniques to improve dynamic range and reduce circuit parameter spread are also presented. The proposed approach is well suited for a computer compiler implementation. A suitability study of each decomposition method for different filtering applications is also carried out and a general guideline for the choice of different decomposition methods is obtained. A comparison study on SI filter sensitivity performance based on first generation and second generation memory cells is carried out. Using four filter examples, it is demonstrated that SI filters based on a second generation SI memory cell have good sensitivity performance. For SI filters based on first generation memory cells, it is shown that a high ratio of clock frequency to cutoff frequency in the lowpass case, or a high ratio of clock frequency to midband frequency in the bandpass case would introduce high sensitivity. A novel approach for SI ladder filter based on the S2I integrator is also proposed and a canonical realisation for SI filter based on S2I integrator is developed. Examination of SI equaliser design reveals that cascade structure is a better candidate than ladder based structure. Multirate SI filter system design is also studied. Finally, a very brief introduction to the assembly of the design methods in this thesis into a software package XHLT for VLSI analogue filter and equaliser design is given. The user aspects of XFILT have been discussed and various capabilities of XFILT are demonstrated. Several advanced facilities which remove traditional design limitations are illustrated. The philosophy of the system is explained. It is shown that the distinguished features of XFILT are Ease of Use. General Applicability, and Ease of Extension. The system structure is described and the graphics interface which acts both as user friendly interface and a system manager of all the software is outlined. Fabricated SC, transconductor-C, and SI filter and equaliser have been designed by using XFILT. The system is under further enhancement toward a commercial product

Some Application of Switched Current Circuits.

A complete digital signal processing system requires analog circuits acting as an interface between the digital system and the outside analog world. Various techniques have been proposed to implement these circuits, but the one compatible with digital technology is switched capacitor (SC) technique. However, there are still some problems with SC circuits which are as follows: (i) The process technology used for these circuits is not compatible with the standard digital process technology due to extra poly-silicon layer, (ii) the performance of these circuits worsens for low voltage operations, because lower supply voltage will tend to increase power consumption for the same dynamic range, and in order to maintain the same dynamic range on a low supply voltage requires a quadratic increase in sampling capacitance to reduce thermal noise. The required increase in bias current to maintain circuit bandwidth results in a net increase in the overall power consumption. To overcome these problems, a new technique called the switched current (SI) technique has been proposed. The technique utilizes the ability of an MOS transistor to maintain its drain current, when its gate is open circuited, through the charge stored on its gate oxide capacitance. In this technique signals are represented by currents instead of voltages and, therefore, the signal swing is only indirectly limited by a reduction of the available voltage range. In a traditional voltage mode circuit, the supply voltage imposes a direct limitation on signal swing. Switched current circuits could therefore be a better for low voltage operation. 5 The application of switched current systems is much same as for switched capacitor systems viz. filters, A/D and D/A converters, general signal processing etc. but the prime aim is that switched current circuits should be implemented using a standard VLSI. In this work, the SI technique has been studied and several reported SI circuits have been simulated for their performance. Specifically, the work was aimed at the study of developing SI technique for the design of high performance circuits such as Integrators, Differentiators, Programmable filters, A/D and D/A converters, Sigma Delta Modulators, Multipliers, Delays etc. All the investigations are based on the PSPICE simulations using model parameters of the BISIM335 MOS transistors. The investigations match the theoretical interpretations and predictions. The entire gamut of this dissertation has been to study the already reported SI circuits and to investigate them for improved accuracy, dynamic range, bandwidth, linearity and low voltage operation

Switched-capacitor systems for narrow bandpass filtering

Imperial Users onl

Computer-Aided Design of Switched-Capacitor Filters

This thesis describes a series of computer methods for the design of switched-capacitor filters. Current software is greatly restricted in the types of transfer function that can be designed and in the range of filter structures by which they can be implemented. To solve the former problem, several new filter approximation algorithms are derived from Newton's method, yielding the Remez algortithm as a special case (confirming its convergency properties). Amplitude responses with arbitrary passband shaping and stopband notch positions are computed. Points of a specified degree of tangency to attenuation boundaries (touch points) can be placed in the response, whereby a family of transfer functions between Butterworth and elliptic can be derived, offering a continuous trade-off in group delay and passive sensitivity properties. The approximation algorithms have also been applied to arbitrary group delay correction by all-pass functions. Touch points form a direct link to an iterative passive ladder design method, which bypasses the need for Hurwitz factorisation. The combination of iterative and classical synthesis methods is suggested as the best compromise between accuracy and speed. It is shown that passive ladder prototypes of a minimum-node form can be efficiently simulated by SC networks without additional op-amps. A special technique is introduced for canonic realisation of SC ladder networks from transfer functions with finite transmission at high frequency, solving instability and synthesis difficulties. SC ladder structures are further simplified by synthesising the zeros at +/-2fs which are introduced into the transfer function by bilinear transformation. They cause cancellation of feedthrough branches and yield simplified LDI-type SC filter structures, although based solely on the bilinear transform. Matrix methods are used to design the SC filter simulations. They are shown to be a very convenient and flexible vehicle for computer processing of the linear equations involved in analogue filter design. A wide variety of filter structures can be expressed in a unified form. Scaling and analysis can readily be performed on the system matrices with great efficiency. Finally, the techniques are assembled in a filter compiler for SC filters called PANDDA. The application of the above techniques to practical design problems is then examined. Exact correction of sinc(x), LDI termination error, pre-filter and local loop telephone line weightings are illustrated. An optimisation algorithm is described, which uses the arbitrary passband weighting to predistort the transfer function for response distortions. Compensation of finite amplifier gain-bandwidth and switch resistance effects in SC filters is demonstrated. Two commercial filter specifications which pose major difficulties for traditional design methods are chosen as examples to illustrate PANDDA's full capabilities. Significant reductions in order and total area are achieved. Finally, test results of several SC filters designed using PANDDA for a dual-channel speech-processing ASIC are presented. The speed with which high-quality, standard SC filters can be produced is thus proven

Automatic tuning of continuous-time filters

Integrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed methods, frequencyand quality factor tuning loops are controlled digitally, providing stable tuning by activating only one loop at a given time. In addition, a direct relationship between passband gain and quality factor is not required, so the techniques can be applied to active LC filters as well as Gm-C filters. The digital-tuning method based on phase comparison was verified with 1% tuning accuracy at 5.5 MHz for Q of 20. It uses phase information for both Q and center-frequency tuning. The filter output phase is tuned to the known references, which are generated by a frequency synthesizer. The core tuning circuit consists of D flip-flops (DFF) and simple logic gates. DFFs are utilized to perform binary phase comparisons. The second method, high-order digital tuning based on phase comparison, is an extension of the previous technique to high-order analog filters without depending on the master-slave approach. Direct tuning of the overall filter response is achieved without separating individual biquad sections, eliminating switches and their parasitics. The tuning system was verified with a prototype 6th order bandpass filter at 19 MHz with 0.6 MHz bandwidth, which was fabricated in a conventional 0.5 [mu]m CMOS technology. Analysis of different practical limitations is also provided. Finally, the digital-tuning method based on magnitude comparison is proposed for second-order filters for higher frequency operations. It incorporates a frequency synthesizer to generate reference signals, an envelope detector and a switched comparator to compare output magnitudes at three reference frequencies. The theoretical analysis of the technique and the simulation results are provided

Analysis and Design Methodologies for Switched-Capacitor Filter Circuits in Advanced CMOS Technologies

Analog filters are an extremely important block in several electronic systems, such as RF transceivers, data acquisition channels, or sigma-delta modulators. They allow the suppression of unwanted frequencies bands in a signal, improving the system’s performance. These blocks are typically implemented using active RC filters, gm-C filters, or switched-capacitor (SC) filters. In modern deep-submicron CMOS technologies, the transistors intrinsic gain is small and has a large variability, making the design of moderate and high-gain amplifiers, used in the implementation of filter blocks, extremely difficult. To avoid this difficulty, in the case of SC filters, the opamp can be replaced with a voltage buffer or a low-gain amplifier (< 2), simplifying the amplifier’s design and making it easier to achieve higher bandwidths, for the same power. However, due to the loss of the virtual ground node, the circuit becomes sensitive to the effects of parasitic capacitances, which effect needs to be compensated during the design process. This thesis addresses the task of optimizing SC filters (mainly focused on implementations using low-gain amplifiers), helping designers with the complex task of designing high performance SC filters in advanced CMOS technologies. An efficient optimization methodology is introduced, based on hybrid cost functions (equation-based/simulation-based) and using genetic algorithms. The optimization software starts by using equations in the cost function to estimate the filter’s frequency response reducing computation time, when compared with the electrical simulation of the circuit’s impulse response. Using equations, the frequency response can be quickly computed (< 1 s), allowing the use of larger populations in the genetic algorithm (GA) to cover the entire design space. Once the specifications are met, the population size is reduced and the equation-based design is fine-tuned using the more computationally intensive, but more accurate, simulation-based cost function, allowing to accurately compensate the parasitic capacitances, which are harder to estimate using equations. With this hybrid approach, it is possible to obtain the final optimized design within a reasonable amount of computation time. Two methods are described for the estimation of the filter’s frequency response. The first method is hierarchical in nature where, in the first step, the frequency response is optimized using the circuit’s ideal transfer function. The following steps are used to optimize circuits, at transistor level, to replace the ideal blocks (amplifier and switches) used in the first step, while compensating the effects of the circuit’s parasitic capacitances in the ideal design. The second method uses a novel efficient numerical methodology to obtain the frequency response of SC filters, based on the circuit’s first-order differential equations. The methodology uses a non-hierarchical approach, where the non-ideal effects of the transistors (in the amplifier and in the switches) are taken into consideration, allowing the accurate computation of the frequency response, even in the case of incomplete settling in the SC branches. Several design and optimization examples are given to demonstrate the performance of the proposed methods. The prototypes of a second order programmable bandpass SC filter and a 50 Hz notch SC filter have been designed in UMC 130 nm CMOS technology and optimized using the proposed optimization software with a supply voltage of 0.9 V. The bandpass SC filter has a total power consumption of 249 uW. The filter’s central frequency can be tuned between 3.9 kHz and 7.1 kHz, the gain between -6.4 dB and 12.6 dB, and the quality factor between 0.9 and 6.9. Depending on the bit configuration, the circuit’s THD is between -54.7 dB and -61.7 dB. The 50 Hz notch SC filter has a total power consumption of 273 uW. The transient simulation of the circuit’s extracted view (C+CC) shows an attenuation of 52.3 dB in the 50 Hz interference and that the desired 5 kHz signal has a THD of -92.3 dB

Analogue filter networks: developments in theory, design and analyses

Not availabl

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Low Voltage Low Power Analogue Circuits Design

Disertační práce je zaměřena na výzkum nejběžnějších metod, které se využívají při návrhu analogových obvodů s využití nízkonapěťových (LV) a nízkopříkonových (LP) struktur. Tyto LV LP obvody mohou být vytvořeny díky vyspělým technologiím nebo také využitím pokročilých technik návrhu. Disertační práce se zabývá právě pokročilými technikami návrhu, především pak nekonvenčními. Mezi tyto techniky patří využití prvků s řízeným substrátem (bulk-driven - BD), s plovoucím hradlem (floating-gate - FG), s kvazi plovoucím hradlem (quasi-floating-gate - QFG), s řízeným substrátem s plovoucím hradlem (bulk-driven floating-gate - BD-FG) a s řízeným substrátem s kvazi plovoucím hradlem (quasi-floating-gate - BD-QFG). Práce je také orientována na možné způsoby implementace známých a moderních aktivních prvků pracujících v napěťovém, proudovém nebo mix-módu. Mezi tyto prvky lze začlenit zesilovače typu OTA (operational transconductance amplifier), CCII (second generation current conveyor), FB-CCII (fully-differential second generation current conveyor), FB-DDA (fully-balanced differential difference amplifier), VDTA (voltage differencing transconductance amplifier), CC-CDBA (current-controlled current differencing buffered amplifier) a CFOA (current feedback operational amplifier). Za účelem potvrzení funkčnosti a chování výše zmíněných struktur a prvků byly vytvořeny příklady aplikací, které simulují usměrňovací a induktanční vlastnosti diody, dále pak filtry dolní propusti, pásmové propusti a také univerzální filtry. Všechny aktivní prvky a příklady aplikací byly ověřeny pomocí PSpice simulací s využitím parametrů technologie 0,18 m TSMC CMOS. Pro ilustraci přesného a účinného chování struktur je v disertační práci zahrnuto velké množství simulačních výsledků.The dissertation thesis is aiming at examining the most common methods adopted by analog circuits' designers in order to achieve low voltage (LV) low power (LP) configurations. The capability of LV LP operation could be achieved either by developed technologies or by design techniques. The thesis is concentrating upon design techniques, especially the non–conventional ones which are bulk–driven (BD), floating–gate (FG), quasi–floating–gate (QFG), bulk–driven floating–gate (BD–FG) and bulk–driven quasi–floating–gate (BD–QFG) techniques. The thesis also looks at ways of implementing structures of well–known and modern active elements operating in voltage–, current–, and mixed–mode such as operational transconductance amplifier (OTA), second generation current conveyor (CCII), fully–differential second generation current conveyor (FB–CCII), fully–balanced differential difference amplifier (FB–DDA), voltage differencing transconductance amplifier (VDTA), current–controlled current differencing buffered amplifier (CC–CDBA) and current feedback operational amplifier (CFOA). In order to confirm the functionality and behavior of these configurations and elements, they have been utilized in application examples such as diode–less rectifier and inductance simulations, as well as low–pass, band–pass and universal filters. All active elements and application examples have been verified by PSpice simulator using the 0.18 m TSMC CMOS parameters. Sufficient numbers of simulated plots are included in this thesis to illustrate the precise and strong behavior of structures.