Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery

One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions

Calibration Methods for Head-Tracked 3D Displays

Head-tracked 3D displays can provide a compelling 3D effect, but even small inaccuracies in the calibration of the participant’s viewpoint to the display can disrupt the 3D illusion. We propose a novel interactive procedure for a participant to easily and accurately calibrate a head-tracked display by visually aligning patterns across a multi-screen display. Head-tracker measurements are then calibrated to these known viewpoints. We conducted a user study to evaluate the effectiveness of different visual patterns and different display shapes. We found that the easiest to align shape was the spherical display and the best calibration pattern was the combination of circles and lines. We performed a quantitative camera-based calibration of a cubic display and found visual calibration outperformed manual tuning and generated viewpoint calibrations accurate to within a degree. Our work removes the usual, burdensome step of manual calibration when using head-tracked displays and paves the way for wider adoption of this inexpensive and effective 3D display technology

Spatial augmented reality in outdoor areas using long-range vision systems

Projection mapping [also known as Spatial Augmented Reality] is a well known augmented reality technique which changes the appearance of the physical, real-world environment by projecting media on them. Projection Mapping is currently used in a variety of applications and it is increasingly becoming more popular. In this research, we investigate the use of computer graphics and computer vision techniques that can enable us to create an immersive augmented reality environment in an outdoor setting with large number of participants. Specifically, we address long range projection of stereoscopic media in anaglyph format. This is inexpensive and less intrusive among user immersion technologies, since participants have only to wear low cost anaglyph glasses. Since the projection surface is at a long distance, and is a real world object(s), and there is always ambient lighting, there are many challenges. These include calibration of the cameras and projectors, modeling the projection surface(s) geometry and light behavior and transforming the projection media to compensate for the surface properties. We address these problems and propose an innovative new framework which uses image-based techniques for automatic calibration, geometry and appearance properties capture, and a simulation based technique for creating compensated media. We have implemented our framework and demonstrate its effectiveness through multiple user studies in real world settings

The Effect of an Occluder on the Accuracy of Depth Perception in Optical See-Through Augmented Reality

Three experiments were conducted to study the effect of an occluder on the accuracy of nearield depth perception in optical-see-through augmented reality (AR). The first experiment was a duplicate experiment of the one in Edwards et al. [2004]. We found more accurate results than Edwards et al.’s work and did not find the occluder’s main effect or its two-way interaction effect with distance on the accuracy of observers’ depth matching. The second experiment was an updated version of the first one using a within-subject design and a more accurate calibration method. The results were that errors ranged from –5 to 3 mm when the occluder was present, –3 to 2 mm when the occluder was absent, and observers judged the virtual object to be closer after the presentation of the occluder. The third experiment was conducted on three subjects who were depth perception researchers. The result showed significant individual effects

REAL-TIME CAPTURE AND RENDERING OF PHYSICAL SCENE WITH AN EFFICIENTLY CALIBRATED RGB-D CAMERA NETWORK

From object tracking to 3D reconstruction, RGB-Depth (RGB-D) camera networks play an increasingly important role in many vision and graphics applications. With the recent explosive growth of Augmented Reality (AR) and Virtual Reality (VR) platforms, utilizing camera RGB-D camera networks to capture and render dynamic physical space can enhance immersive experiences for users. To maximize coverage and minimize costs, practical applications often use a small number of RGB-D cameras and sparsely place them around the environment for data capturing. While sparse color camera networks have been studied for decades, the problems of extrinsic calibration of and rendering with sparse RGB-D camera networks are less well understood. Extrinsic calibration is difficult because of inappropriate RGB-D camera models and lack of shared scene features. Due to the significant camera noise and sparse coverage of the scene, the quality of rendering 3D point clouds is much lower compared with synthetic models. Adding virtual objects whose rendering depend on the physical environment such as those with reflective surfaces further complicate the rendering pipeline. In this dissertation, I propose novel solutions to tackle these challenges faced by RGB-D camera systems. First, I propose a novel extrinsic calibration algorithm that can accurately and rapidly calibrate the geometric relationships across an arbitrary number of RGB-D cameras on a network. Second, I propose a novel rendering pipeline that can capture and render, in real-time, dynamic scenes in the presence of arbitrary-shaped reflective virtual objects. Third, I have demonstrated a teleportation application that uses the proposed system to merge two geographically separated 3D captured scenes into the same reconstructed environment. To provide a fast and robust calibration for a sparse RGB-D camera network, first, the correspondences between different camera views are established by using a spherical calibration object. We show that this approach outperforms other techniques based on planar calibration objects. Second, instead of modeling camera extrinsic using rigid transformation that is optimal only for pinhole cameras, different view transformation functions including rigid transformation, polynomial transformation, and manifold regression are systematically tested to determine the most robust mapping that generalizes well to unseen data. Third, the celebrated bundle adjustment procedure is reformulated to minimize the global 3D projection error so as to fine-tune the initial estimates. To achieve a realistic mirror rendering, a robust eye detector is used to identify the viewer\u27s 3D location and render the reflective scene accordingly. The limited field of view obtained from a single camera is overcome by our calibrated RGB-D camera network system that is scalable to capture an arbitrarily large environment. The rendering is accomplished by raytracing light rays from the viewpoint to the scene reflected by the virtual curved surface. To the best of our knowledge, the proposed system is the first to render reflective dynamic scenes from real 3D data in large environments. Our scalable client-server architecture is computationally efficient - the calibration of a camera network system, including data capture, can be done in minutes using only commodity PCs

A Programmable Display-Layer Architecture for Virtual-Reality Applications

Two important technical objectives of virtual-reality systems are to provide compelling visuals and effective 3D user interaction. In this respect, modern virtual reality system architectures suffer from a number of short-comings. The reduction of end-to-end latency, crosstalk and judder are especially difficult challenges, each of which negatively affects visual quality or user interaction. In order to provide higher quality visuals, complex scenes consisting of large models are often used. Rendering such a complex scene is a time-consuming process resulting in high end-to-end latency, thereby hampering user interaction. Classic virtual-reality architectures can not adequately address these challenges due to their inherent design principles. In particular, the tight coupling between input devices, the rendering loop and the display system inhibits these systems from addressing all the aforementioned challenges simultaneously. In this thesis, a virtual-reality architecture design is introduced that is based on the addition of a new logical layer: the Programmable Display Layer (PDL). The governing idea is that an extra layer is inserted between the rendering system and the display. In this way, the display can be updated at a fast rate and in a custom manner independent of the other components in the architecture, including the rendering system. To generate intermediate display updates at a fast rate, the PDL performs per-pixel depth-image warping by utilizing the application data. Image warping is the process of computing a new image by transforming individual depth-pixels from a closely matching previous image to their updated locations. The PDL architecture can be used for a range of algorithms and to solve problems that are not easily solved using classic architectures. In particular, techniques to reduce crosstalk, judder and latency are examined using algorithms implemented on top of the PDL. Concerning user interaction techniques, several six-degrees-of-freedom input methods exists, of which optical tracking is a popular option. However, optical tracking methods also introduce several constraints that depend on the camera setup, such as line-of-sight requirements, the volume of the interaction space and the achieved tracking accuracy. These constraints generally cause a decline in the effectiveness of user interaction. To investigate the effectiveness of optical tracking methods, an optical tracker simulation framework has been developed, including a novel optical tracker to test this framework. In this way, different optical tracking algorithms can be simulated and quantitatively evaluated under a wide range of conditions. A common approach in virtual reality is to implement an algorithm and then to evaluate the efficacy of that algorithm by either subjective, qualitative metrics or quantitative user experiments, after which an updated version of the algorithm may be implemented and the cycle repeated. A different approach is followed here. Throughout this thesis, an attempt is made to automatically detect and quantify errors using completely objective and automated quantitative methods and to subsequently attempt to resolve these errors dynamically

Mixed reality simulation of rasping procedure in artificial cervical disc replacement (ACDR) surgery

<p>Abstract</p> <p>Background</p> <p>Until quite recently spinal disorder problems in the U.S. have been operated by fusing cervical vertebrae instead of replacement of the cervical disc with an artificial disc. Cervical disc replacement is a recently approved procedure in the U.S. It is one of the most challenging surgical procedures in the medical field due to the deficiencies in available diagnostic tools and insufficient number of surgical practices For physicians and surgical instrument developers, it is critical to understand how to successfully deploy the new artificial disc replacement systems. Without proper understanding and practice of the deployment procedure, it is possible to injure the vertebral body. Mixed reality (MR) and virtual reality (VR) surgical simulators are becoming an indispensable part of physicians’ training, since they offer a risk free training environment. In this study, MR simulation framework and intricacies involved in the development of a MR simulator for the rasping procedure in artificial cervical disc replacement (ACDR) surgery are investigated. The major components that make up the MR surgical simulator with motion tracking system are addressed. </p> <p>Findings</p> <p>A mixed reality surgical simulator that targets rasping procedure in the artificial cervical disc replacement surgery with a VICON motion tracking system was developed. There were several challenges in the development of MR surgical simulator. First, the assembly of different hardware components for surgical simulation development that involves knowledge and application of interdisciplinary fields such as signal processing, computer vision and graphics, along with the design and placements of sensors etc . Second challenge was the creation of a physically correct model of the rasping procedure in order to attain critical forces. This challenge was handled with finite element modeling. The third challenge was minimization of error in mapping movements of an actor in real model to a virtual model in a process called registration. This issue was overcome by a two-way (virtual object to real domain and real domain to virtual object) semi-automatic registration method.</p> <p>Conclusions</p> <p>The applicability of the VICON MR setting for the ACDR surgical simulator is demonstrated. The main stream problems encountered in MR surgical simulator development are addressed. First, an effective environment for MR surgical development is constructed. Second, the strain and the stress intensities and critical forces are simulated under the various rasp instrument loadings with impacts that are applied on intervertebral surfaces of the anterior vertebrae throughout the rasping procedure. Third, two approaches are introduced to solve the registration problem in MR setting. Results show that our system creates an effective environment for surgical simulation development and solves tedious and time-consuming registration problems caused by misalignments. Further, the MR ACDR surgery simulator was tested by 5 different physicians who found that the MR simulator is effective enough to teach the anatomical details of cervical discs and to grasp the basics of the ACDR surgery and rasping procedure</p