Development and certification of mixed-criticality embedded systems based on probabilistic timing analysis

An increasing variety of emerging systems relentlessly replaces or augments the functionality of mechanical subsystems with embedded electronics. For quantity, complexity, and use, the safety of such subsystems is an increasingly important matter. Accordingly, those systems are subject to safety certification to demonstrate system's safety by rigorous development processes and hardware/software constraints. The massive augment in embedded processors' complexity renders the arduous certification task significantly harder to achieve. The focus of this thesis is to address the certification challenges in multicore architectures: despite their potential to integrate several applications on a single platform, their inherent complexity imperils their timing predictability and certification. Recently, the Measurement-Based Probabilistic Timing Analysis (MBPTA) technique emerged as an alternative to deal with hardware/software complexity. The innovation that MBPTA brings about is, however, a major step from current certification procedures and standards. The particular contributions of this Thesis include: (i) the definition of certification arguments for mixed-criticality integration upon multicore processors. In particular we propose a set of safety mechanisms and procedures as required to comply with functional safety standards. For timing predictability, (ii) we present a quantitative approach to assess the likelihood of execution-time exceedance events with respect to the risk reduction requirements on safety standards. To this end, we build upon the MBPTA approach and we present the design of a safety-related source of randomization (SoR), that plays a key role in the platform-level randomization needed by MBPTA. And (iii) we evaluate current certification guidance with respect to emerging high performance design trends like caches. Overall, this Thesis pushes the certification limits in the use of multicore and MBPTA technology in Critical Real-Time Embedded Systems (CRTES) and paves the way towards their adoption in industry.Una creciente variedad de sistemas emergentes reemplazan o aumentan la funcionalidad de subsistemas mecánicos con componentes electrónicos embebidos. El aumento en la cantidad y complejidad de dichos subsistemas electrónicos así como su cometido, hacen de su seguridad una cuestión de creciente importancia. Tanto es así que la comercialización de estos sistemas críticos está sujeta a rigurosos procesos de certificación donde se garantiza la seguridad del sistema mediante estrictas restricciones en el proceso de desarrollo y diseño de su hardware y software. Esta tesis trata de abordar los nuevos retos y dificultades dadas por la introducción de procesadores multi-núcleo en dichos sistemas críticos: aunque su mayor rendimiento despierta el interés de la industria para integrar múltiples aplicaciones en una sola plataforma, suponen una mayor complejidad. Su arquitectura desafía su análisis temporal mediante los métodos tradicionales y, asimismo, su certificación es cada vez más compleja y costosa. Con el fin de lidiar con estas limitaciones, recientemente se ha desarrollado una novedosa técnica de análisis temporal probabilístico basado en medidas (MBPTA). La innovación de esta técnica, sin embargo, supone un gran cambio cultural respecto a los estándares y procedimientos tradicionales de certificación. En esta línea, las contribuciones de esta tesis están agrupadas en tres ejes principales: (i) definición de argumentos de seguridad para la certificación de aplicaciones de criticidad-mixta sobre plataformas multi-núcleo. Se definen, en particular, mecanismos de seguridad, técnicas de diagnóstico y reacción de faltas acorde con el estándar IEC 61508 sobre una arquitectura multi-núcleo de referencia. Respecto al análisis temporal, (ii) presentamos la cuantificación de la probabilidad de exceder un límite temporal y su relación con los requisitos de reducción de riesgos derivados de los estándares de seguridad funcional. Con este fin, nos basamos en la técnica MBPTA y presentamos el diseño de una fuente de números aleatorios segura; un componente clave para conseguir las propiedades aleatorias requeridas por MBPTA a nivel de plataforma. Por último, (iii) extrapolamos las guías actuales para la certificación de arquitecturas multi-núcleo a una solución comercial de 8 núcleos y las evaluamos con respecto a las tendencias emergentes de diseño de alto rendimiento (caches). Con estas contribuciones, esta tesis trata de abordar los retos que el uso de procesadores multi-núcleo y MBPTA implican en el proceso de certificación de sistemas críticos de tiempo real y facilita, de esta forma, su adopción por la industria.Postprint (published version

Multi-core devices for safety-critical systems: a survey

Multi-core devices are envisioned to support the development of next-generation safety-critical systems, enabling the on-chip integration of functions of different criticality. This integration provides multiple system-level potential benefits such as cost, size, power, and weight reduction. However, safety certification becomes a challenge and several fundamental safety technical requirements must be addressed, such as temporal and spatial independence, reliability, and diagnostic coverage. This survey provides a categorization and overview at different device abstraction levels (nanoscale, component, and device) of selected key research contributions that support the compliance with these fundamental safety requirements.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2015-65316-P, Basque Government under grant KK-2019-00035 and the HiPEAC Network of Excellence. The Spanish Ministry of Economy and Competitiveness has also partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717).Peer ReviewedPostprint (author's final draft

The Role of Mixed Criticality Technology in Industry 4.0

[EN] Embedded systems used in critical systems, such as aeronautics, have undergone continuous evolution in recent years. In this evolution, many of the functionalities offered by these systems have been adapted through the introduction of network services that achieve high levels of interconnectivity. The high availability of access to communications networks has enabled the development of new applications that introduce control functions with higher levels of intelligence and adaptation. In these applications, it is necessary to manage different components of an application according to their levels of criticality. The concept of "Industry 4.0" has recently emerged to describe high levels of automation and flexibility in production. The digitization and extensive use of information technologies has become the key to industrial systems. Due to their growing importance and social impact, industrial systems have become part of the systems that are considered critical. This evolution of industrial systems forces the appearance of new technical requirements for software architectures that enable the consolidation of multiple applications in common hardware platforms-including those of different criticality levels. These enabling technologies, together with use of reference models and standardization facilitate the effective transition to this approach. This article analyses the structure of Industry 4.0 systems providing a comprehensive review of existing techniques. The levels and mechanisms of interaction between components are analyzed while considering the impact that the handling of multiple levels of criticality has on the architecture itself-and on the functionalities of the support middleware. Finally, this paper outcomes some of the challenges from a technological and research point of view that the authors identify as crucial for the successful development of these technologies.This research was funded by the Spanish Science and Innovation Ministry MICINN: CICYT project PRECON-I4: "Predictable and dependable computer systems for Industry 4.0" TIN201786520-C3-1-R.Simó Ten, JE.; Balbastre, P.; Blanes Noguera, F.; Poza-Lujan, J.; Guasque Ortega, A. (2021). The Role of Mixed Criticality Technology in Industry 4.0. Electronics. 10(3):1-16. https://doi.org/10.3390/electronics1003022611610

GPU devices for safety-critical systems: a survey

Graphics Processing Unit (GPU) devices and their associated software programming languages and frameworks can deliver the computing performance required to facilitate the development of next-generation high-performance safety-critical systems such as autonomous driving systems. However, the integration of complex, parallel, and computationally demanding software functions with different safety-criticality levels on GPU devices with shared hardware resources contributes to several safety certification challenges. This survey categorizes and provides an overview of research contributions that address GPU devices’ random hardware failures, systematic failures, and independence of execution.This work has been partially supported by the European Research Council with Horizon 2020 (grant agreements No. 772773 and 871465), the Spanish Ministry of Science and Innovation under grant PID2019-107255GB, the HiPEAC Network of Excellence and the Basque Government under grant KK-2019-00035. The Spanish Ministry of Economy and Competitiveness has also partially supported Leonidas Kosmidis with a Juan de la Cierva Incorporación postdoctoral fellowship (FJCI-2020- 045931-I).Peer ReviewedPostprint (author's final draft

Mixed-Criticality Systems on Commercial-Off-the-Shelf Multi-Processor Systems-on-Chip

Avionics and space industries are struggling with the adoption of technologies like multi-processor system-on-chips (MPSoCs) due to strict safety requirements. This thesis propose a new reference architecture for MPSoC-based mixed-criticality systems (MCS) - i.e., systems integrating applications with different level of criticality - which are a common use case for aforementioned industries. This thesis proposes a system architecture capable of granting partitioning - which is, for short, the property of fault containment. It is based on the detection of spatial and temporal interference, and has been named the online detection of interference (ODIn) architecture. Spatial partitioning requires that an application is not able to corrupt resources used by a different application. In the architecture proposed in this thesis, spatial partitioning is implemented using type-1 hypervisors, which allow definition of resource partitions. An application running in a partition can only access resources granted to that partition, therefore it cannot corrupt resources used by applications running in other partitions. Temporal partitioning requires that an application is not able to unexpectedly change the execution time of other applications. In the proposed architecture, temporal partitioning has been solved using a bounded interference approach, composed of an offline analysis phase and an online safety net. The offline phase is based on a statistical profiling of a metric sensitive to temporal interference’s, performed in nominal conditions, which allows definition of a set of three thresholds: 1. the detection threshold TD; 2. the warning threshold TW ; 3. the α threshold. Two rules of detection are defined using such thresholds: Alarm rule When the value of the metric is above TD. Warning rule When the value of the metric is in the warning region [TW ;TD] for more than α consecutive times. ODIn’s online safety-net exploits performance counters, available in many MPSoC architectures; such counters are configured at bootstrap to monitor the selected metric(s), and to raise an interrupt request (IRQ) in case the metric value goes above TD, implementing the alarm rule. The warning rule is implemented in a software detection module, which reads the value of performance counters when the monitored task yields control to the scheduler and reset them if there is no detection. ODIn also uses two additional detection mechanisms: 1. a control flow check technique, based on compile-time defined block signatures, is implemented through a set of watchdog processors, each monitoring one partition. 2. a timeout is implemented through a system watchdog timer (SWDT), which is able to send an external signal when the timeout is violated. The recovery actions implemented in ODIn are: • graceful degradation, to react to IRQs of WDPs monitoring non-critical applications or to warning rule violations; it temporarily stops non-critical applications to grant resources to the critical application; • hard recovery, to react to the SWDT, to the WDP of the critical application, or to alarm rule violations; it causes a switch to a hot stand-by spare computer. Experimental validation of ODIn was performed on two hardware platforms: the ZedBoard - dual-core - and the Inventami board - quad-core. A space benchmark and an avionic benchmark were implemented on both platforms, composed by different modules as showed in Table 1 Each version of the final application was evaluated through fault injection (FI) campaigns, performed using a specifically designed FI system. There were three types of FI campaigns: 1. HW FI, to emulate single event effects; 2. SW FI, to emulate bugs in non-critical applications; 3. artificial bug FI, to emulate a bug in non-critical applications introducing unexpected interference on the critical application. Experimental results show that ODIn is resilient to all considered types of faul

Probabilistic Worst-Case Timing Analysis: Taxonomy and Comprehensive Survey

"© ACM, 2019. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version was published in ACM Computing Surveys, {VOL 52, ISS 1, (February 2019)} https://dl.acm.org/doi/10.1145/3301283"[EN] The unabated increase in the complexity of the hardware and software components of modern embedded real-time systems has given momentum to a host of research in the use of probabilistic and statistical techniques for timing analysis. In the last few years, that front of investigation has yielded a body of scientific literature vast enough to warrant some comprehensive taxonomy of motivations, strategies of application, and directions of research. This survey addresses this very need, singling out the principal techniques in the state of the art of timing analysis that employ probabilistic reasoning at some level, building a taxonomy of them, discussing their relative merit and limitations, and the relations among them. In addition to offering a comprehensive foundation to savvy probabilistic timing analysis, this article also identifies the key challenges to be addressed to consolidate the scientific soundness and industrial viability of this emerging field.This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant TIN2015-65316-P, the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 772773), and the HiPEAC Network of Excellence. Jaume Abella was partially supported by the Ministry of Economy and Competitiveness under a Ramon y Cajal postdoctoral fellowship (RYC-2013-14717). Enrico Mezzetti has been partially supported by the Spanish Ministry of Economy and Competitiveness under Juan de la Cierva-Incorporación postdoctoral fellowship No. IJCI-2016-27396.Cazorla, FJ.; Kosmidis, L.; Mezzetti, E.; Hernández Luz, C.; Abella, J.; Vardanega, T. (2019). Probabilistic Worst-Case Timing Analysis: Taxonomy and Comprehensive Survey. ACM Computing Surveys. 52(1):1-35. https://doi.org/10.1145/3301283S13552

SAFEXPLAIN: Safe and Explainable Critical Embedded Systems Based on AI

Deep Learning (DL) techniques are at the heart of most future advanced software functions in Critical Autonomous AI-based Systems (CAIS), where they also represent a major competitive factor. Hence, the economic success of CAIS industries (e.g., automotive, space, railway) depends on their ability to design, implement, qualify, and certify DL-based software products under bounded effort/cost. However, there is a fundamental gap between Functional Safety (FUSA) requirements on CAIS and the nature of DL solutions. This gap stems from the development process of DL libraries and affects high-level safety concepts such as (1) explainability and traceability, (2) suitability for varying safety requirements, (3) FUSA-compliant implementations, and (4) real-time constraints. As a matter of fact, the data-dependent and stochastic nature of DL algorithms clashes with current FUSA practice, which instead builds on deterministic, verifiable, and pass/fail test-based software. The SAFEXPLAIN project tackles these challenges and targets by providing a flexible approach to allow the certification - hence adoption - of DL-based solutions in CAIS building on: (1) DL solutions that provide end-to-end traceability, with specific approaches to explain whether predictions can be trusted and strategies to reach (and prove) correct operation, in accordance to certification standards; (2) alternative and increasingly sophisticated design safety patterns for DL with varying criticality and fault tolerance requirements; (3) DL library implementations that adhere to safety requirements; and (4) computing platform configurations, to regain determinism, and probabilistic timing analyses, to handle the remaining non-determinism.The research leading to these results has received funding from the Horizon Europe Programme under the SAFEXPLAIN Project (www.safexplain.eu), grant agreement num. 101069595. BSC authors have also been supported by the Spanish Ministry of Science and Innovation under grant PID2019- 107255GBC21/AEI/10.13039/501100011033.Peer Reviewed"Article signat per 22 autors/es: Jaume Abella, Jon Perez, Cristofer Englund, Bahram Zonooz, Gabriele Giordana, Carlo Donzella, Francisco J. Cazorla, Enrico Mezzetti, Isabel Serra, Axel Brando, Irune Agirre, Fernando Eizaguirre, Thanh Hai Bui, Elahe Arani, Fahad Sarfraz, Ajay Balasubramaniam, Ahmed BadarIlaria Bloise, Lorenzo Feruglio, Ilaria Cinelli, Davide Brighenti, Davide Cunial"Postprint (author's final draft

Improving time predictability of shared hardware resources in real-time multicore systems : emphasis on the space domain

Critical Real-Time Embedded Systems (CRTES) follow a verification and validation process on the timing and functional correctness. This process includes the timing analysis that provides Worst-Case Execution Time (WCET) estimates to provide evidence that the execution time of the system, or parts of it, remain within the deadlines. A key design principle for CRTES is the incremental qualification, whereby each software component can be subject to verification and validation independently of any other component, with obvious benefits for cost. At timing level, this requires time composability, such that the timing behavior of a function is not affected by other functions. CRTES are experiencing an unprecedented growth with rising performance demands that have motivated the use of multicore architectures. Multicores can provide the performance required and bring the potential of integrating several software functions onto the same hardware. However, multicore contention in the access to shared hardware resources creates a dependence of the execution time of a task with the rest of the tasks running simultaneously. This dependence threatens time predictability and jeopardizes time composability. In this thesis we analyze and propose hardware solutions to be applied on current multicore designs for CRTES to improve time predictability and time composability, focusing on the on-chip bus and the memory controller. At hardware level, we propose new bus and memory controller designs that control and mitigate contention between different cores and allow to have time composability by design, also in the context of mixed-criticality systems. At analysis level, we propose contention prediction models that factor the impact of contenders and don¿t need modifications to the hardware. We also propose a set of Performance Monitoring Counters (PMC) that provide evidence about the contention. We give an special emphasis on the Space domain focusing on the Cobham Gaisler NGMP multicore processor, which is currently assessed by the European Space Agency for its future missions.Los Sistemas Críticos Empotrados de Tiempo Real (CRTES) siguen un proceso de verificación y validación para su correctitud funcional y temporal. Este proceso incluye el análisis temporal que proporciona estimaciones de el peor caso del tiempo de ejecución (WCET) para dar evidencia de que el tiempo de ejecución del sistema, o partes de él, permanecen dentro de los límites temporales. Un principio de diseño clave para los CRTES es la cualificación incremental, por la que cada componente de software puede ser verificado y validado independientemente del resto de componentes, con beneficios obvios para el coste. A nivel temporal, esto requiere composabilidad temporal, por la que el comportamiento temporal de una función no se ve afectado por otras funciones. CRTES están experimentando un crecimiento sin precedentes con crecientes demandas de rendimiento que han motivado el uso the arquitecturas multi-núcleo (multicore). Los procesadores multi-núcleo pueden proporcionar el rendimiento requerido y tienen el potencial de integrar varias funcionalidades software en el mismo hardware. A pesar de ello, la interferencia entre los diferentes núcleos que aparece en los recursos compartidos de os procesadores multi núcleo crea una dependencia del tiempo de ejecución de una tarea con el resto de tareas ejecutándose simultáneamente en el procesador. Esta dependencia amenaza la predictabilidad temporal y compromete la composabilidad temporal. En esta tésis analizamos y proponemos soluciones hardware para ser aplicadas en los diseños multi núcleo actuales para CRTES que mejoran la predictabilidad y composabilidad temporal, centrándose en el bus y el controlador de memoria internos al chip. A nivel de hardware, proponemos nuevos diseños de buses y controladores de memoria que controlan y mitigan la interferencia entre los diferentes núcleos y permiten tener composabilidad temporal por diseño, también en el contexto de sistemas de criticalidad mixta. A nivel de análisis, proponemos modelos de predicción de la interferencia que factorizan el impacto de los núcleos y no necesitan modificaciones hardware. También proponemos un conjunto de Contadores de Control del Rendimiento (PMC) que proporcionoan evidencia de la interferencia. En esta tésis, damós especial importancia al dominio espacial, centrándonos en el procesador mutli núcleo Cobham Gaisler NGMP, que está siendo actualmente evaluado por la Agencia Espacial Europea para sus futuras misiones