1,154 research outputs found
Design and Implementation of Internal Model Based Controllers for DC/ AC Power Converters
The aim of this thesis is to design and implement an advanced control system for a working three-phase DC to AC power converter. Compared to' the traditional PI controller used widely in industry, the new voltage controller can track the reference voltage with improved accuracy and efficiency in the presence of different kind of local loads, and also works well in the single phase voltage control. This voltage controller is combined with a power controller to yield a complete controller. An important aspect of this work is the hardware implementation of the whole system. Main parts ofthis thesis are: ???????? 1. Review ofH-infinity and repetitive control techniques and their applications in power converters. 2. Design of a new voltage controller to eliminate the DC component in the output voltages, and taking into account the practical issues such as the processing delay due to the digital signal processor (DSP) implementation. 3. Modelling and simulation of the converter system incorporating different control techniques and with different kinds of loads. 4. Hardware implementation and the two-processor controller. The parallel communication between the DSPs. 5. The main problems encountered in???????????????????? hardware implementation and programming. The software used to initialize DSPs, implement the discretetime voltage controller and other functions such ~ generations of space vector pulse width modulation (SVPWM) signals, circuit protections, analog to digital (AD) cOl)versions, data transmission, etc. 6. Experimental results the under circumstances of no load connected to the converter, pure three-phase resistive loads, three-phase unbalanced resistive' loads and the series resistor-inductor loads. /Imperial Users onl
Digital repetitive control under varying frequency conditions
Premi extraordinari doctorat curs 2011-2012, àmbit d’Enginyeria IndustrialThe tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area and
Repetitive Control has proven to be an efficient way to face this topic; however, in some applications the period of the signal to
be tracked/rejected changes in time or is uncertain, which causes and important performance degradation in the standard
repetitive controller. This thesis presents some contributions to the open topic of repetitive control working under varying
frequency conditions. These contributions can be organized as follows:
One approach that overcomes the problem of working under time varying frequency conditions is the adaptation of the
controller sampling period, nevertheless, the system framework changes from Linear Time Invariant to Linear Time-Varying
and the closed-loop stability can be compromised. This work presents two different methodologies aimed at analysing the
system stability under these conditions. The first one uses a Linear Matrix Inequality (LMI) gridding approach which provides
necessary conditions to accomplish a sufficient condition for the closed-loop Bounded Input Bounded Output stability of the
system. The second one applies robust control techniques in order to analyse the stability and yields sufficient stability
conditions. Both methodologies yield a frequency variation interval for which the system stability can be assured. Although
several approaches exist for the stability analysis of general time-varying sampling period controllers few of them allow an
integrated controller design which assures closed-loop stability under such conditions. In this thesis two design
methodologies are presented, which assure stability of the repetitive control system working under varying sampling period
for a given frequency variation interval: a mu-synthesis technique and a pre-compensation strategy.
On a second branch, High Order Repetitive Control (HORC) is mainly used to improve the repetitive control performance
robustness under disturbance/reference signals with varying or uncertain frequency. Unlike standard repetitive control, the
HORC involves a weighted sum of several signal periods. With a proper selection of the associated weights, this high order
function offers a characteristic frequency response in which the high gain peaks located at harmonic frequencies are
extended to a wider region around the harmonics. Furthermore, the use of an odd-harmonic internal model will make the
system more appropriate for applications where signals have only odd-harmonic components, as in power electronics
systems. Thus an Odd-harmonic High Order Repetitive Controller suitable for applications involving odd-harmonic type
signals with varying/uncertain frequency is presented. The open loop stability of internal models used in HORC and the one
presented here is analysed. Additionally, as a consequence of this analysis, an Anti-Windup (AW) scheme for repetitive
control is proposed. This AW proposal is based on the idea of having a small steady state tracking error and fast recovery
once the system goes out of saturation.
The experimental validation of these proposals has been performed in two different applications: the Roto-magnet plant and
the active power filter application. The Roto-magnet plant is an experimental didactic plant used as a tool for analysing and
understanding the nature of the periodic disturbances, as well as to study the different control techniques used to tackle this
problem. This plant has been adopted as experimental test bench for rotational machines. On the other hand, shunt active
power filters have been widely used as a way to overcome power quality problems caused by nonlinear and reactive loads.
These power electronics devices are designed with the goal of obtaining a power factor close to 1 and achieving current
harmonics and reactive power compensation.Award-winningPostprint (published version
High performance position control for permanent magnet synchronous drives
In the design and test of electric drive control systems, computer simulations provide a useful way to verify the correctness and efficiency of various schemes and control algorithms before the final system is actually constructed, therefore, development time and associated costs are reduced. Nevertheless, the transition from the simulation stage to the actual implementation has to be as straightforward as possible. This document presents the design and implementation of a position control system for permanent magnet synchronous drives, including a review and comparison of various related works about non-linear control systems applied to this type of machine. The overall electric drive control system is simulated and tested in Proteus VSM software which is able to simulate the interaction between the firmware running on a microcontroller and analogue circuits connected to it. The dsPIC33FJ32MC204 is used as the target processor to implement the control algorithms. The electric drive model is developed using elements existing in the Proteus VSM library. As in any high performance electric drive system, field oriented control is applied to achieve accurate torque control. The complete control system is distributed in three control loops, namely torque, speed and position. A standard PID control system, and a hybrid control system based on fuzzy logic are implemented and tested. The natural variation of motor parameters, such as winding resistance and magnetic flux are also simulated. Comparisons between the two control schemes are carried out for speed and position using different error measurements, such as, integral square error, integral absolute error and root mean squared error. Comparison results show a superior performance of the hybrid fuzzy-logic-based controller when coping with parameter variations, and by reducing torque ripple, but the results are reversed when periodical torque disturbances are present. Finally, the speed controllers are implemented and evaluated physically in a testbed based on a brushless DC motor, with the control algorithms implemented on a dsPIC30F2010. The comparisons carried out for the speed controllers are consistent for both simulation and physical implementation
Robust Control
The need to be tolerant to changes in the control systems or in the operational environment of systems subject to unknown disturbances has generated new control methods that are able to deal with the non-parametrized disturbances of systems, without adapting itself to the system uncertainty but rather providing stability in the presence of errors bound in a model. With this approach in mind and with the intention to exemplify robust control applications, this book includes selected chapters that describe models of H-infinity loop, robust stability and uncertainty, among others. Each robust control method and model discussed in this book is illustrated by a relevant example that serves as an overview of the theoretical and practical method in robust control
Design and Development of a Twisted String Exoskeleton Robot for the Upper Limb
High-intensity and task-specific upper-limb treatment of active, highly repetitive movements are the effective approaches for patients with motor disorders. However, with the severe shortage of medical service in the United States and the fact that post-stroke survivors can continue to incur significant financial costs, patients often choose not to return to the hospital or clinic for complete recovery. Therefore, robot-assisted therapy can be considered as an alternative rehabilitation approach because the similar or better results as the patients who receive intensive conventional therapy offered by professional physicians.;The primary objective of this study was to design and fabricate an effective mobile assistive robotic system that can provide stroke patients shoulder and elbow assistance. To reduce the size of actuators and to minimize the weight that needs to be carried by users, two sets of dual twisted-string actuators, each with 7 strands (1 neutral and 6 effective) were used to extend/contract the adopted strings to drive the rotational movements of shoulder and elbow joints through a Bowden cable mechanism. Furthermore, movements of non-disabled people were captured as templates of training trajectories to provide effective rehabilitation.;The specific aims of this study included the development of a two-degree-of-freedom prototype for the elbow and shoulder joints, an adaptive robust control algorithm with cross-coupling dynamics that can compensate for both nonlinear factors of the system and asynchronization between individual actuators as well as an approach for extracting the reference trajectories for the assistive robotic from non-disabled people based on Microsoft Kinect sensor and Dynamic time warping algorithm. Finally, the data acquisition and control system of the robot was implemented by Intel Galileo and XILINX FPGA embedded system
Uncertainty and disturbance estimator design to shape and reduce the output impedance of inverter
Power inverters are becoming more and more common in the modern grid. Due to their switching nature, a passive filter is installed at the inverter output. This generates high output impedance which limits the inverter ability to maintain high power quality at the inverter output. This thesis deals with an impedance shaping approach to the design of power inverter control. The Uncertainty and Disturbance Estimator (UDE) is proposed as a candidate for direct formation of the inverter output impedance. The selection of UDE is motivated by the desire for the disturbance rejection control and the tracking controller to be decoupled. It is demonstrated in the thesis that due to this fact the UDE filter design directly influences the inverter output impedance and the reference model determines the inverter internal electromotive force. It was recently shown in the literature and further emphasized in this thesis that the classic low pass frequency design of the UDE cannot estimate periodical disturbances under the constraint of finite control bandwidth. Since for a power inverter both the reference signal and the disturbance signal are of periodical nature, the classic UDE lowpass filter design does not give optimal results. A new design approach is therefore needed. The thesis develops four novel designs of the UDE filter to significantly reduce the inverter output impedance and maintain low Total Harmonic Distortion (THD) of the inverter output voltage. The first design is the based on a frequency selective filter. This filter design shows superiority in both observing and rejecting periodical disturbances over the classic low pass filter design. The second design uses a multi-band stop design to reject periodical disturbances with some uncertainty in the frequency. The third solution uses a classic low pass filter design combined with a time delay to match zero phase estimation of the disturbance at the relevant spectrum. Furthermore, this solution is combined with a resonant tracking controller to reduce the tracking steady-state error in the output voltage. The fourth solution utilizes a low-pass filter combined with multiple delays to increase the frequency robustness. This method shows superior performance over the multi-band-stop and the time delayed filter in steady-state. All the proposed methods are validated through extensive simulation and experimental results
RF applications in digital signal processing
Ever higher demands for stability, accuracy, reproducibility, and monitoring capability are being placed on Low-Level Radio Frequency (LLRF) systems of particle accelerators. Meanwhile, continuing rapid advances in digital signal processing technology are being exploited to meet these demands, thus leading to development of digital LLRF systems. The rst part of this course will begin by focusing on some of the important building-blocks of RF signal processing including mixer theory and down-conversion, I/Q (amplitude and phase) detection, digital down-conversion (DDC) and decimation, concluding with a survey of I/Q modulators. The second part of the course will introduce basic concepts of feedback systems, including examples of digital cavity eld and phase control, followed by radial loop architectures. Adaptive feed-forward systems used for the suppression of repetitive beam disturbances will be examined. Finally, applications and principles of system identi cation approaches will be summarized
- …