1,587 research outputs found
Map-Aware Models for Indoor Wireless Localization Systems: An Experimental Study
The accuracy of indoor wireless localization systems can be substantially
enhanced by map-awareness, i.e., by the knowledge of the map of the environment
in which localization signals are acquired. In fact, this knowledge can be
exploited to cancel out, at least to some extent, the signal degradation due to
propagation through physical obstructions, i.e., to the so called
non-line-of-sight bias. This result can be achieved by developing novel
localization techniques that rely on proper map-aware statistical modelling of
the measurements they process. In this manuscript a unified statistical model
for the measurements acquired in map-aware localization systems based on
time-of-arrival and received signal strength techniques is developed and its
experimental validation is illustrated. Finally, the accuracy of the proposed
map-aware model is assessed and compared with that offered by its map-unaware
counterparts. Our numerical results show that, when the quality of acquired
measurements is poor, map-aware modelling can enhance localization accuracy by
up to 110% in certain scenarios.Comment: 13 pages, 11 figures, 1 table. IEEE Transactions on Wireless
Communications, 201
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Collaborative Indoor Positioning Systems: A Systematic Review
Research and development in Collaborative Indoor Positioning Systems (CIPSs) is growing
steadily due to their potential to improve on the performance of their non-collaborative counterparts.
In contrast to the outdoors scenario, where Global Navigation Satellite System is widely adopted, in
(collaborative) indoor positioning systems a large variety of technologies, techniques, and methods is
being used. Moreover, the diversity of evaluation procedures and scenarios hinders a direct comparison. This paper presents a systematic review that gives a general view of the current CIPSs. A total of
84 works, published between 2006 and 2020, have been identified. These articles were analyzed and
classified according to the described system’s architecture, infrastructure, technologies, techniques,
methods, and evaluation. The results indicate a growing interest in collaborative positioning, and
the trend tend to be towards the use of distributed architectures and infrastructure-less systems.
Moreover, the most used technologies to determine the collaborative positioning between users are
wireless communication technologies (Wi-Fi, Ultra-WideBand, and Bluetooth). The predominant collaborative positioning techniques are Received Signal Strength Indication, Fingerprinting, and Time
of Arrival/Flight, and the collaborative methods are particle filters, Belief Propagation, Extended
Kalman Filter, and Least Squares. Simulations are used as the main evaluation procedure. On the
basis of the analysis and results, several promising future research avenues and gaps in research
were identified
A Framework for UWB-Based Communication and Location Tracking Systems for Wireless Sensor Networks
Ultra wideband (UWB) radio technology is nowadays one of the most promising technologies for medium-short range communications. It has a wide range of applications including Wireless Sensor Networks (WSN) with simultaneous data transmission and location tracking. The combination of location and data transmission is important in order to increase flexibility and reduce the cost and complexity of the system deployment. In this scenario, accuracy is not the only evaluation criteria, but also the amount of resources associated to the location service, as it has an impact not only on the location capacity of the system but also on the sensor data transmission capacity. Although several studies can be found in the literature addressing UWB-based localization, these studies mainly focus on distance estimation and position calculation algorithms. Practical aspects such as the design of the functional architecture, the procedure for the transmission of the associated information between the different elements of the system, and the need of tracking multiple terminals simultaneously in various application scenarios, are generally omitted. This paper provides a complete system level evaluation of a UWB-based communication and location system for Wireless Sensor Networks, including aspects such as UWB-based ranging, tracking algorithms, latency, target mobility and MAC layer design. With this purpose, a custom simulator has been developed, and results with real UWB equipment are presented too
Optimizing Indoor Location Based Tracking through Proper Filter Selection and Wireless Sensor Network Design
Indoor positioning system (IPS) is a topic that is coming up more and more for various reasons, such as allowing companies to track important objects using radio frequency identification (RFID) and employees with Bluetooth devices inside a facility. Geofencing is one of the biggest topics with IPS and is meant to limit access to a network in specified areas. Devices that incorporate indoor tracking are not initially precise when objects and employees are on the move. This movement requires devices to have a reliable filter for noise and package lose. For this paper, the comparison between extended Kalman filters and unscented Kalman filter in a controlled environment will help indicate which is ideal for IPS tracking. Both filters will be applied and compared on location accuracy metrics. The proper design of the wireless network is also crucial for having an effective IPS method. This will show the difference in wireless networks and how the initial design will lead to greater chance of success for IPS
Target Tracking in Confined Environments with Uncertain Sensor Positions
To ensure safety in confined environments such as mines or subway tunnels, a
(wireless) sensor network can be deployed to monitor various environmental
conditions. One of its most important applications is to track personnel,
mobile equipment and vehicles. However, the state-of-the-art algorithms assume
that the positions of the sensors are perfectly known, which is not necessarily
true due to imprecise placement and/or dropping of sensors. Therefore, we
propose an automatic approach for simultaneous refinement of sensors' positions
and target tracking. We divide the considered area in a finite number of cells,
define dynamic and measurement models, and apply a discrete variant of belief
propagation which can efficiently solve this high-dimensional problem, and
handle all non-Gaussian uncertainties expected in this kind of environments.
Finally, we use ray-tracing simulation to generate an artificial mine-like
environment and generate synthetic measurement data. According to our extensive
simulation study, the proposed approach performs significantly better than
standard Bayesian target tracking and localization algorithms, and provides
robustness against outliers.Comment: IEEE Transactions on Vehicular Technology, 201
- …