Energy Conversion Alternatives Study (ECAS), General Electric Phase 1. Volume 3: Energy Conversion subsystems and components. Part 2: Primary heat input systems and heat exchangers

Primary heat input systems and heat exchangers were evaluated for advanced energy conversion systems. Results are presented and discussed

Techno-economic analysis of chemical looping combustion with humid air turbine power cycle

Power generation from fossil fuel-fired power plant is the largest single source of CO₂ emission. CO₂ emission contributes to climate change. On the other hand, renewable energy is hindered by complex constraints in dealing with large scale application and high price. Power generation from fossil fuels with CO₂ capture is therefore necessary to meet the increasing energy demand, and reduce the emission of CO₂. This paper presents a process simulation and economic analysis of the chemical looping combustion (CLC) integrated with humid air turbine (HAT) cycle for natural gas-fired power plant with CO₂ capture. The study shows that the CLC–HAT including CO₂ capture has a thermal efficiency of 57% at oxidizing temperature of 1200 °C and reducer inlet temperature of 530 °C. The economic evaluation shows that the 50 MWth plant with a projected lifetime of 30 years will have a payback period of 7 years and 6 years for conventional HAT and CLC–HAT cycles respectively. The analysis indicates that CLC–HAT process has a high potential to be commercialised

Conceptual design study of a coal gasification combined-cycle powerplant for industrial cogeneration

A conceptual design study was conducted to assess technical feasibility, environmental characteristics, and economics of coal gasification. The feasibility of a coal gasification combined cycle cogeneration powerplant was examined in response to energy needs and to national policy aimed at decreasing dependence on oil and natural gas. The powerplant provides the steam heating and baseload electrical requirements while serving as a prototype for industrial cogeneration and a modular building block for utility applications. The following topics are discussed: (1) screening of candidate gasification, sulfur removal and power conversion components; (2) definition of a reference system; (3) quantification of plant emissions and waste streams; (4) estimates of capital and operating costs; and (5) a procurement and construction schedule. It is concluded that the proposed powerplant is technically feasible and environmentally superior

Assessment of the environmental aspects of the DOE phosphoric acid fuel cell program

The likely facets of a nationwide phosphoric acid fuel cell (PAFC) power plant commercial system are described. The beneficial and adverse environmental impacts produced by the system are assessed. Eleven specific system activities are characterized and evaluated. Also included is a review of fuel cell technology and a description of DOE's National Fuel Cell Program. Based on current and reasonably foreseeable PAFC characteristics, no environmental or energy impact factor was identified that would significantly inhibit the commercialization of PAFC power plant technology

Carbon-Free Power

There is a new world order in electrical energy production. Solar and wind power are established as the low-cost leaders. However, these energy sources are highly variable and electrical power is needed 24/7. Alternative sources must fill the gaps, but only a few are both economical and carbon-free or -neutral. This book presents one alternative: small modular nuclear reactors (SMRs). The authors describe the technology, including its safety and economic aspects, and assess its fit with other carbon-free energy sources, storage solutions, and industrial opportunities. They also explain the challenges with SMRs, including public acceptance. The purpose of the book is to help readers consider these relatively new reactors as part of an appropriate energy mix for the future and, ultimately, to make their own judgments on the merits of the arguments for SMRs.Publishe

A suggested roadmap for world-wide energy resource planning and management

In the near future, we will need an internationally based system for worldwide planning of future energy resources and their effect on the world environment. Logically, this should be a responsibility of the United Nations, which already possesses much of the infrastructure needed and is already active in this area. Because different nations have different resources, different problems and different needs, it is reasoned that a flexible and diplomatic approach is also called for. We will need to try to secure support from all nations, and the economies and cultures of many nations differ considerably. This calls for special skills in negotiation. This is complicated by the varied, uncertain and changing technological facilities, which we have at our disposal. After a brief and comparative review of these facilities, an outline of the structure of the internationally coordinating organisation is suggested, followed by examples of the different types of issues which are likely to be encountered. These are: reintroducing improved technology to a nation, which has suffered grievous environmental harm from inadequate similar technology such as the Fukushima incident; nations with especially difficult transport problems; nations with perceived overpopulation problems; using UN and other expertise for nations still undergoing development; applying persuasive pressure by peaceful means. Finally, by outlining a large-scale cooperative venture by several nations, the mode of operation of the suggested U.N coordinating body is outlined. The example used is the choice of thorium-based molten-salt reactor technology using both fast and thermal neutron spectra. This appears to be the only choice we have, as other sustainable systems cannot accommodate the size of our problems. The only exception is using the Desertec solar project, which appears to be disadvantaged by being significantly more expensive. Molten-salt reactors would give a 1000-year energy security for industrialised energy-hungry nations on the Far East/Pacific Rim, which is the example considered. This system would use modern actinide burn-up technology to make nuclear-waste disposal a more acceptable proposition. Thus, nuclear waste can become a lowlevel and disposable hazard after only about 300 years of storage. After this storage, the waste becomes a valuable resource due to production of rare transmuted elements

Energy Conversion Alternatives Study (ECAS), General Electric Phase 1. Volume 3: Energy conversion subsystems and components. Part 3: Gasification, process fuels, and balance of plant

Results are presented of an investigation of gasification and clean fuels from coal. Factors discussed include: coal and coal transportation costs; clean liquid and gas fuel process efficiencies and costs; and cost, performance, and environmental intrusion elements of the integrated low-Btu coal gasification system. Cost estimates for the balance-of-plant requirements associated with advanced energy conversion systems utilizing coal or coal-derived fuels are included

Up-scaling, formative phases, and learning in the historical diffusion of energy technologies

The 20th century has witnessed wholesale transformation in the energy system marked by the pervasive diffusion of both energy supply and end-use technologies. Just as whole industries have grown, so too have unit sizes or capacities. Analysed in combination, these unit level and industry level growth patterns reveal some consistencies across very different energy technologies. First, the up-scaling or increase in unit size of an energy technology comes after an often prolonged period of experimentation with many smaller-scale units. Second, the peak growth phase of an industry can lag these increases in unit size by up to 20 years. Third, the rate and timing of up-scaling at the unit level is subject to countervailing influences of scale economies and heterogeneous market demand. These observed patterns have important implications for experience curve analyses based on time series data covering the up-scaling phases of energy technologies, as these are likely to conflate industry level learning effects with unit level scale effects. The historical diffusion of energy technologies also suggests that low carbon technology policies pushing for significant jumps in unit size before a ‘formative phase’ of experimentation with smaller-scale units are risky

Applications of aerospace technology in the electric power industry

An overview of the electric power industry, selected NASA contributions to progress in the industry, linkages affecting the transfer and diffusion of technology, and, finally, a perspective on technology transfer issues are presented

Sustainable energy: choices, problems and opportunities

About the Book: The world's dependence on fossil fuels is widely acknowledged to be a major cause of rising levels of carbon dioxide in the atmosphere. Thus there is an urgent need to develop energy sources with lower environmental impact, with attention focusing on renewable energy sources. Concise, authoritative, up-to-date and readable, this book reviews various energy technologies, as well as taking a critical look at the political, social and economic aspects. Throughout, the emphasis is on renewable energy sources (wind, wave, solar, biomass, etc), but a discussion of fossil fuels and nuclear power is also presented. This timely book, written by recognised experts, will be welcomed by those in the energy industries as well as by policy-makers, consultants and engineers. Students and lecturers will also find the material invaluable