An approach to investigate surface roughness influence on non-lubricated and lubricated contacts by means of the finite element analysis = Ein Ansatz zur Untersuchung der Oberflächenrauheiteinflüsse bei geschmierten und trockenen Kontakten mittels der Finite Elemente Methode

Present thesis develops a numerical analysis framework to investigate the mixed lubricated contacts of two rough surfaces by means of the finite element method. A verification has been done to check the convergence of the microscopic mixed lubrication model. Parameter study done for the mixed lubrication model displays the contact stresses and temperatures and shows which parameter had the most influence on the friction behavior

An integrated operation and maintenance framework for offshore renewable energy

Offshore renewable devices hold a large potential as renewable energy sources, but their deployment costs are still too high compared to those of other technologies. Operation and maintenance, as well as management of the assets, are main contributors to the overall costs of the projects, and decision-support tools in this area are required to decrease the final cost of energy.\\ In this thesis a complete characterisation and optimisation framework for the operation, maintenance and assets management of an offshore renewable farm is presented. The methodology uses known approaches, based on Monte Carlo simulation for the characterisation of the key performance indicators of the offshore renewable farm, and genetic algorithms as a search heuristic for the proposal of improved strategies. These methods, coupled in an integrated framework, constitute a novel and valuable tool to support the decision-making process in this area. The methods developed consider multiple aspects for the accurate description of the problem, including considerations on the reliability of the devices and limitations on the offshore operations dictated by the properties of the maintenance assets. Mechanisms and constraints that influence the maintenance procedures are considered and used to determine the optimal strategy. The models are flexible over a range of offshore renewable technologies, and adaptable to different offshore farm sizes and layouts, as well as maintenance assets and configurations of the devices. The approaches presented demonstrate the potential for cost reduction in the operation and maintenance strategy selection, and highlight the importance of computational tools to improve the profitability of a project while ensuring that satisfactory levels of availability and reliability are preserved. Three case studies to show the benefits of application of such methodologies, as well as the validity of their implementation, are provided. Areas for further development are identified, and suggestions to improve the effectiveness of decision-making tools for the assets management of offshore renewable technologies are provided.European CommissionMojo Ocean Dynamics Ltd. T/A Mojo Maritime Lt

Aeronautical engineering: A continuing bibliography with indexes (supplement 303)

This bibliography lists 211 reports, articles, and other documents introduced into the NASA scientific and technical information database. Subject coverage includes: design, construction, and testing of aircraft and aircraft engines; aircraft components, equipment, and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

Doctor of Philosophy

dissertationScale-bridging models are created to capture desired characteristics of high-fidelity models within low-fidelity model-forms for the purpose of allowing models to function at required spacial and/or temporal scales. The development, analysis, and application of scale-bridging models will be the focus of this dissertation. The applications dictating scales herein are large-scale computational fluid dynamics codes. Three unique scale-bridging models will be presented. First, the development and validation of a multiple-polymorph, particle precipitation modeling framework for highly supersaturated CaCO3 systems will be presented. This precipitation framework is validated against literature data, as well as explored for additional avenues of validation and potential future applications. Following this will be an introduction to the concepts of validation and uncertainty quantification and an approach for credible simulation development based upon those concepts. The credible simulation development approach is demonstrated through a spring-mass-damper pedagogical example. Bayesian statistical methods are commonly applied to validation and uncertainty quantification issues and the well-known Kennedy O'Hagan approach towards model-form uncertainty will be explored thoroughly using a chemical kinetics pedagogical example. Additional issues and ideas surrounding model-form uncertainty such as the identification problem will also be considered. Bayesian methods will then be applied towards the creation of a scale-bridging model for coal particle heat capacity and enthalpy modeling. Lastly, an alternative validation and uncertainty quantification technique, known as consistency testing, will be utilized to create a scale-bridging model for coal particle devolatilization. The credibility of the devolatilization scale-bridging model due to the model development process is assessed and found to have benefited from the use of validation and uncertainty quantification practices

Ingénierie systèmes basée sur les modèles appliquée à la gestion et l'intégration des données de conception et de simulation : application aux métiers d'intégration et de simulation de systèmes aéronautiques complexes

The aim of this doctoral thesis is to contribute to the facilitation of design, integration and simulation activities in the aeronautics industry, but more generally in the context of collaborative complex product development. This objective is expected to be achieved through the use and improvement of digital engineering capabilities. During the last decade, the Digital Mock-Up (DMU) – supported by Product Data Management (PDM) systems – became a key federating environment to exchange/share a common 3D CAD model-based product definition between co-designers. It enables designers and downstream users(analysts) to access the geometry of the product assembly. While enhancing 3D and 2D simulations in a collaborative and distributed design process, the DMU offers new perspectives for analysts to retrieve the appropriate CAD data inputs used for Finite Element Analysis (FEA), permitting hence to speed-up the simulation preparation process. However, current industrial DMUs suffer from several limitations, such as the lack of flexibility in terms of content and structure, the lack of digital interface objects describing the relationships between its components and a lack of integration with simulation activities and data.This PhD underlines the DMU transformations required to provide adapted DMUs that can be used as direct input for large assembly FEA. These transformations must be consistent with the simulation context and objectives and lead to the concept of “Product View” applied to DMUs andto the concept of “Behavioural Mock-Up” (BMU). A product view defines the link between a product representation and the activity or process (performed by at least one stakeholder) that use or generate this representation as input or output respectively. The BMU is the equivalent of the DMU for simulation data and processes. Beyond the geometry, which is represented in the DMU,the so-called BMU should logically link all data and models that are required to simulate the physical behaviour and properties of a single component or an assembly of components. The key enabler for achieving the target of extending the concept of the established CAD-based DMU to the behavioural CAE-based BMU is to find a bi-directional interfacing concept between the BMU and its associated DMU. This the aim of the Design-Analysis System Integration Framework (DASIF) proposed in this PhD. This framework might be implemented within PLM/SLM environments and interoperate with both CAD-DMU and CAE-BMU environments. DASIF combines configuration data management capabilities of PDM systems with MBSE system modelling concepts and Simulation Data Management capabilities.This PhD has been carried out within a European research project: the CRESCENDO project, which aims at delivering the Behavioural Digital Aircraft (BDA). The BDA concept might consist in a collaborative data exchange/sharing platform for design-simulation processes and models throughout the development life cycle of aeronautics products. Within this project, the Product Integration Scenario and related methodology have been defined to handle digital integration chains and to provide a test case scenario for testing DASIF concepts. These latter have been used to specify and develop a prototype of an “Integrator Dedicated Environment” implemented in commercial PLM/SLM applications. Finally the DASIF conceptual data model has also served as input for contributing to the definition of the Behavioural Digital Aircraft Business Object Model: the standardized data model of the BDA platform enabling interoperability between heterogeneous PLM/SLM applications and to which existing local design environments and new services to be developed could plug.L’objectif de cette thèse est de contribuer au développement d’approches méthodologiques et d’outils informatiques pour développer les chaînes d’intégration numériques en entreprise étendue. Il s’agit notamment de mieux intégrer et d’optimiser les activités de conception, d’intégration et de simulation dans le contexte du développement collaboratif des produits/systèmes complexes.La maquette numérique (DMU) – supportée par un système de gestion de données techniques (SGDT ou PDM) – est devenue ces dernières années un environnement fédérateur clé pour échanger et partager une définition technique et une représentation 3D commune du produit entre concepteurs et partenaires. Cela permet aux concepteurs ainsi qu’aux utilisateurs en aval (ceux qui sont en charge des simulations numériques notamment) d’avoir un accès à la géométrie du produit virtuel assemblé. Alors que les simulations numériques 3D et 2D prennent une place de plus en plus importante dans le cycle de développement du produit, la DMU offre de nouvelles perspectives à ces utilisateurs pour récupérer et exploiter les données CAO appropriées et adaptées pour les analyses par éléments finis. Cela peut ainsi permettre d’accélérer le processus de préparation du modèle de simulation. Cependant, les environnements industriels de maquettes numériques sont actuellement limités dans leur exploitation par : - un manque de flexibilité en termes de contenu et de structure, - l’absence d’artefact numérique 3D permettant de décrire les interfaces des composants de l’assemblage, - un manque d’intégration avec les données et activités de simulation.Cette thèse met notamment l’accent sur les transformations à apporter aux DMU afin qu’elles puissent être utilisées comme données d’entrée directes pour les analyses par éléments finis d’assemblages volumineux (plusieurs milliers de pièces). Ces transformations doivent être en cohérence avec le contexte et les objectifs de simulation et cela nous a amené au concept de « vue produit » appliquée aux DMUs, ainsi qu’au concept de « maquette comportementale » (BMU). Une « vue produit » définit le lien entre une représentation du produit et l’activité ou le processus utilisant ou générant cette représentation. La BMU est l’équivalent de la DMU pour les données et les processus de simulation. Au delà des géométries discrétisées, la dénommée BMU devrait, en principe, lier toutes les données et les modèles qui seront nécessaires pour simuler le comportement d’un ou plusieurs composants. L’élément clé pour atteindre l’objectif d’élargir le concept établi de la DMU (basée sur des modèles CAO) à celui de la BMU (basée sur des modèles CAE), est de trouver un concept d’interface bidirectionnel entre la BMU et sa DMU associée. C’est l’objectif du « Design-Analysis System Integration Framework » (DASIF) proposé dans cette thèse de doctorat. Ce cadre a vise à être implémenté au sein d’environnements PLM/SLM et doit pouvoir inter-opérer à la fois avec les environnements CAD-DMU et CAE-BMU. DASIF allie les fonctionnalités de gestion de données et de configuration des systèmes PDM avec les concepts et formalismes d’ingénierie système basée sur les modèles (MBSE) et des fonctionnalités de gestion des données de simulation (SDM). Cette thèse a été menée dans le cadre d’un projet de recherche européen : le projet CRESCENDO qui vise à développer le « Behavioural Digital Aircraft » (BDA) qui a pour vocation d’être la« colonne vertébrale » des activités de conception et simulation avancées en entreprise étendue. Le concept du BDA doit s’articuler autour d’une plateforme collaborative d’échange et de partage des données de conception et de simulation tout au long du cycle de développement et de vie des produits aéronautiques. [...

Engenharia de sistemas baseada em modelos: um sistema para o tráfego & ambiente

Doutoramento em Gestão IndustrialThe contemporary world is crowded of large, interdisciplinary, complex systems made of other systems, personnel, hardware, software, information, processes, and facilities. The Systems Engineering (SE) field proposes an integrated holistic approach to tackle these socio-technical systems that is crucial to take proper account of their multifaceted nature and numerous interrelationships, providing the means to enable their successful realization. Model-Based Systems Engineering (MBSE) is an emerging paradigm in the SE field and can be described as the formalized application of modelling principles, methods, languages, and tools to the entire lifecycle of those systems, enhancing communications and knowledge capture, shared understanding, improved design precision and integrity, better development traceability, and reduced development risks. This thesis is devoted to the application of the novel MBSE paradigm to the Urban Traffic & Environment domain. The proposed system, the GUILTE (Guiding Urban Intelligent Traffic & Environment), deals with a present-day real challenging problem “at the agenda” of world leaders, national governors, local authorities, research agencies, academia, and general public. The main purposes of the system are to provide an integrated development framework for the municipalities, and to support the (short-time and real-time) operations of the urban traffic through Intelligent Transportation Systems, highlighting two fundamental aspects: the evaluation of the related environmental impacts (in particular, the air pollution and the noise), and the dissemination of information to the citizens, endorsing their involvement and participation. These objectives are related with the high-level complex challenge of developing sustainable urban transportation networks. The development process of the GUILTE system is supported by a new methodology, the LITHE (Agile Systems Modelling Engineering), which aims to lightening the complexity and burdensome of the existing methodologies by emphasizing agile principles such as continuous communication, feedback, stakeholders involvement, short iterations and rapid response. These principles are accomplished through a universal and intuitive SE process, the SIMILAR process model (which was redefined at the light of the modern international standards), a lean MBSE method, and a coherent System Model developed through the benchmark graphical modeling languages SysML and OPDs/OPL. The main contributions of the work are, in their essence, models and can be settled as: a revised process model for the SE field, an agile methodology for MBSE development environments, a graphical tool to support the proposed methodology, and a System Model for the GUILTE system. The comprehensive literature reviews provided for the main scientific field of this research (SE/MBSE) and for the application domain (Traffic & Environment) can also be seen as a relevant contribution.O mundo contemporâneo é caracterizado por sistemas de grande dimensão e de natureza marcadamente complexa, sócio-técnica e interdisciplinar. A Engenharia de Sistemas (ES) propõe uma abordagem holística e integrada para desenvolver tais sistemas, tendo em consideração a sua natureza multifacetada e as numerosas inter-relações que advêm de uma quantidade significativa de diferentes pontos de vista, competências, responsabilidades e interesses. A Engenharia de Sistemas Baseada em Modelos (ESBM) é um paradigma emergente na área da ES e pode ser descrito como a aplicação formal de princípios, métodos, linguagens e ferramentas de modelação ao ciclo de vida dos sistemas descritos. Espera-se que, na próxima década, a ESBM desempenhe um papel fundamental na prática da moderna Engenharia de Sistemas. Esta tese é dedicada à aplicação da ESBM a um desafio real que constitui uma preocupação do mundo actual, estando “na agenda” dos líderes mundiais, governantes nacionais, autoridades locais, agências de investigação, universidades e público em geral. O domínio de aplicação, o Tráfego & Ambiente, caracteriza-se por uma considerável complexidade e interdisciplinaridade, sendo representativo das áreas de interesse para a ES. Propõe-se um sistema (GUILTE) que visa dotar os municípios de um quadro de desenvolvimento integrado para adopção de Sistemas de Transporte Inteligentes e apoiar as suas operações de tráfego urbano, destacando dois aspectos fundamentais: a avaliação dos impactos ambientais associados (em especial, a poluição atmosférica e o ruído) e a divulgação de informação aos cidadãos, motivando o seu envolvimento e participação. Estes objectivos relacionam-se com o desafio mais abrangente de desenvolver redes de transporte urbano sustentáveis. O processo de desenvolvimento do sistema apoia-se numa nova metodologia (LITHE), mais ágil, que enfatiza os princípios de comunicação contínua, feedback, participação e envolvimento dos stakeholders, iterações curtas e resposta rápida. Estes princípios são concretizados através de um processo de ES universal e intuitivo (redefinido à luz dos padrões internacionais), de um método simples e de linguagens gráficas de modelação de referência (SysML e OPDs/OPL). As principais contribuições deste trabalho são, na sua essência, modelos: um modelo revisto para o processo da ES, uma metodologia ágil para ambientes de desenvolvimento baseados em modelos, uma ferramenta gráfica para suportar a metodologia proposta e o modelo de um sistema para as operações de tráfego & ambiente num contexto urbano. Contribui-se ainda com uma cuidada revisão bibliográfica para a principal área de investigação (ES/ESBM) e para o domínio de aplicação (Tráfego & Ambiente)

Aeronautical engineering: A continuing bibliography with indexes (supplement 272)

This bibliography lists 719 reports, articles, and other documents introduced into the NASA scientific and technical information system in November, 1991. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment, and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

A process model in platform independent and neutral formal representation for design engineering automation

An engineering design process as part of product development (PD) needs to satisfy ever-changing customer demands by striking a balance between time, cost and quality. In order to achieve a faster lead-time, improved quality and reduced PD costs for increased profits, automation methods have been developed with the help of virtual engineering. There are various methods of achieving Design Engineering Automation (DEA) with Computer-Aided (CAx) tools such as CAD/CAE/CAM, Product Lifecycle Management (PLM) and Knowledge Based Engineering (KBE). For example, Computer Aided Design (CAD) tools enable Geometry Automation (GA), PLM systems allow for sharing and exchange of product knowledge throughout the PD lifecycle. Traditional automation methods are specific to individual products and are hard-coded and bound by the proprietary tool format. Also, existing CAx tools and PLM systems offer bespoke islands of automation as compared to KBE. KBE as a design method incorporates complete design intent by including re-usable geometric, non-geometric product knowledge as well as engineering process knowledge for DEA including various processes such as mechanical design, analysis and manufacturing. It has been recognised, through an extensive literature review, that a research gap exists in the form of a generic and structured method of knowledge modelling, both informal and formal modelling, of mechanical design process with manufacturing knowledge (DFM/DFA) as part of model based systems engineering (MBSE) for DEA with a KBE approach. There is a lack of a structured technique for knowledge modelling, which can provide a standardised method to use platform independent and neutral formal standards for DEA with generative modelling for mechanical product design process and DFM with preserved semantics. The neutral formal representation through computer or machine understandable format provides open standard usage. This thesis provides a contribution to knowledge by addressing this gap in two-steps: • In the first step, a coherent process model, GPM-DEA is developed as part of MBSE which can be used for modelling of mechanical design with manufacturing knowledge utilising hybrid approach, based on strengths of existing modelling standards such as IDEF0, UML, SysML and addition of constructs as per author’s Metamodel. The structured process model is highly granular with complex interdependencies such as activities, object, function, rule association and includes the effect of the process model on the product at both component and geometric attributes. • In the second step, a method is provided to map the schema of the process model to equivalent platform independent and neutral formal standards using OWL/SWRL ontology for system development using Protégé tool, enabling machine interpretability with semantic clarity for DEA with generative modelling by building queries and reasoning on set of generic SWRL functions developed by the author. Model development has been performed with the aid of literature analysis and pilot use-cases. Experimental verification with test use-cases has confirmed the reasoning and querying capability on formal axioms in generating accurate results. Some of the other key strengths are that knowledgebase is generic, scalable and extensible, hence provides re-usability and wider design space exploration. The generative modelling capability allows the model to generate activities and objects based on functional requirements of the mechanical design process with DFM/DFA and rules based on logic. With the help of application programming interface, a platform specific DEA system such as a KBE tool or a CAD tool enabling GA and a web page incorporating engineering knowledge for decision support can consume relevant part of the knowledgebase

CAE - PROCESS AND NETWORK : A methodology for continuous product validation process based on network of various digital simulation methods

CAE ProNet methodology is to develop CAE network considering interdependencies among digital validations. Utilizing CAE network and considering industrial requirements, an algorithm is applied to execute a product, vehicle development phase, and load case priority oriented CAE process. Major advantage of this research work is to improve quality of simulation results, reducing time-to-market and decreasing dependencies on hardware prototype

Advances on Mechanics, Design Engineering and Manufacturing III

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations