Ultra-Low-Power Sensors and Receivers for IoT Applications

The combination of ultra-low power analog front-ends and CMOS-compatible transducers enable new applications, such as environmental monitors, household appliances, health trackers, etc. that are seamlessly integrated into our daily lives. Furthermore, wireless connectivity allows many of these sensors to operate both independently and collectively. These techniques collectively fulfil the recent surge of internet-of-things (IoT) applications that have the potential to fundamentally change daily life for millions of people.In this dissertation, the circuit and system design of wireless receivers and sensors is presented that explores the challenges of implementing long lifespan, high accuracy, and large coverage range IoT sensor networks. The first is a wake-up receiver (WuRX), which continuously monitors the RF environment to wake up a higher-power radio upon detection of a predetermined RF signature. This work both improves sensitivity and reduces power over prior art through a multi-faceted design featuring an impedance transformation network with large passive voltage gain, an active envelope detector with high input impedance to facilitate large passive voltage gain, a low-power precision comparator, and a low-leakage digital baseband correlator.Although pushing the prior WuRX performance boundary by orders of magnitude, the first work shows moderate sensitivity, inferior temperature robustness, and large area with external lumped components. Thus, the second work shows a miniaturized WuRX that is temperature-compensated, yet still consumes only nano-watt power and millimeter area while operating at 9 GHz. To further reduce the area, a global common-mode feedback is utilized across the envelope detector and baseband amplifier that eliminates the need for off-chip ac-coupling components. Multiple temperature-compensation techniques are proposed to maintain constant bandwidth of the signal path and constant clock frequency. Both WuRXs operate at 0.4 V supply, consume near-zero power and achieve ~-70 dBm sensitivity.Lastly, the first reported CMOS 2-in-1 relative humidity and temperature sensor is presented. A unified analog front-end interfaces on-chip transducers and converts the inputs into a frequency vis a high-linearity frequency-locked loop. An incomplete-settling switched-capacitor-based Wheatstone bridge is proposed to sense the inputs in a power-efficient fashion

The ALICE TPC, a large 3-dimensional tracking device with fast readout for ultra-high multiplicity events

The design, construction, and commissioning of the ALICE Time-Projection Chamber (TPC) is described. It is the main device for pattern recognition, tracking, and identification of charged particles in the ALICE experiment at the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m^3 and is operated in a 0.5 T solenoidal magnetic field parallel to its axis. In this paper we describe in detail the design considerations for this detector for operation in the extreme multiplicity environment of central Pb--Pb collisions at LHC energy. The implementation of the resulting requirements into hardware (field cage, read-out chambers, electronics), infrastructure (gas and cooling system, laser-calibration system), and software led to many technical innovations which are described along with a presentation of all the major components of the detector, as currently realized. We also report on the performance achieved after completion of the first round of stand-alone calibration runs and demonstrate results close to those specified in the TPC Technical Design Report.Comment: 55 pages, 82 figure

Analysis of the charging of the SCATHA (P78-2) satellite

The charging of a large object in polar Earth orbit was investigated in order to obtain a preliminary indication of the response of the shuttle orbiter to such an environment. Two NASCAP (NASA Charging Analyzer Program) models of SCATHA (Satellite Charging at High Altitudes) were used in simulations of charging events. The properties of the satellite's constituent materials were compiled and representations of the experimentally observed plasma spectra were constructed. Actual charging events, as well as those using test environments, were simulated. Numerical models for the simulation of particle emitters and detectors were used to analyze the operation of these devices onboard SCATHA. The effect of highly charged surface regions on the charging conductivity within a photosheath was used to interpret results from the onboard electric field experiment. Shadowing calculations were carried out for the satellite and a table of effective illuminated areas was compiled

Low temperature transport and evidence for nuclear order in GaAs Quantum Wires

In this thesis we focus on low temperature transport through cleaved edge overgrowth (CEO) quantum wires. This thesis is motivated by recent theoretical work on one hand that predicts the formation of a nuclear helimagnet in presence of a Luttinger liquid (LL) below a critical system temperature [1] and previous measurements on CEO wires on the other hand that might indicate the onset of such a phase transition [2]. The first task for this thesis was to create suitable measurement conditions to approach the theoretically predicted strongly correlated state of matter. More precisely,electron sample temperatures much lower than the predicted ordering temperature of 75mK for GaAs CEO wires have to be demonstrated. For this purpose, cryogenic microwave filters with very low cut-off frequency and good thermalization properties were developed and installed for all measurement cables. With that a minimum electron temperature of 7.5mK was reached in metallic coulomb blockade thermometers [3],and furthermore, for the first time in these devices, a deviation from pure electron-phonon cooling is observed [4]. At low refrigerator temperatures T_R, the CEO (double) wires show pronounced and completely reproducible conductance oscillations as a function of density. We show that these oscillations, also present in the zero magnetic field tunneling current between the parallel quantum wires, emerge as 1D Fabry Perot resonances in the ballistic CEO wires [5]. We analyze the maximum transmission (T=1) through these wires, i.e the oscillation maxima, in the single mode regime as a function of temperature. While the quantum wires approach universal conductance quantization of 2e^2/h for a single quantum wire only at quite large T_R>15K, we find that the conductance saturates below T_R=75mK at 1e^2/h [6]. Furthermore, we give strong evidence that the conductance saturation is not related to insuffcient thermalization, i.e.the CEO wires cool far beyond the saturation temperature of 75mK. This seems to indicate lifting of electron spin degeneracy at zero external magnetic field, consistent with the theo- retically predicted low temperature limit for a clean LL in the ordered helicalstate [1]. We can further exclude other potential mechanisms (temperature dependent contact resistance, freeze-out of weakly disordered LL, Wigner crystal formation/incoherent LL), leaving only nuclear spins as candidates for the source of the (possibly) observed lifted spin degeneracy as spin-orbit coupling is rather weak in GaAs, and the saturation at 1e^2/h is observed in absence of an external magnetic field. This might resolve the long-standing mystery of the temperature-dependent (non-universal) conductance quantization in GaAs cleaved edge overgrowth quantum wires, and furthermore might give first experimental evidence for a new, strongly correlated state of matter, namely (helical) nuclear order induced by the strongly interacting electrons via hyperfine coupling. We also measure real-time tunneling in a GaAs few electron double quantum dot (DQD) by means of an adjacent quantum dot as charge sensor. At low temperatures, in the limit of negligible interdot tunneling and low tunnel rates to source and drain, we observe metastable charge state switching. The metastability only occurs within diamond shaped regions that are centered between associated triple points of the charge stability diagram (CSD). We show that these charge fluctuations arise as an intrinsic property in DQDs, and take place via fast intermediate states that include an electron exchange with the leads [7]. Due to the geometrical shape of the diamond (in very good agreement with our model of thermally activated electron exchange with the leads), its large energy scale (>1.7K) and due to its visibility even at charge sensor bias voltages as small as 5µV, we exclude extrinsic effects such as phonon or photon assisted tunneling. Furthermore, the simultaneous observation of the diamond shaped region of metastable charge state switching at various points in the CSD and its pinning to associated triple points upon reshaping the DQD, make charge traps and other defects a very unlikely explanation

New techniques for imaging photon-counting and particle detectors

Since the advent of space-based astronomy in the early 1960's, there has been a need for space-qualified detectors with sufficient sensitivity and resolution to detect and image single photons, ions or electrons. This thesis describes a research programme to develop detectors that fulfil these requirements. I begin by describing the role of detectors in space astronomy and follow with a review of detector technologies, with particular emphasis on imaging techniques. Conductive charge division image readouts offer high performance, simplicity, and flexibility and their potential is investigated in both theory and practice. I introduce the basic design concept and discuss the fundamental factors limiting performance in relation to physical design and to underlying physical processes. Readout manufacturing techniques are reviewed and a novel method presented. I describe specific space and ground-based readout applications which proved valuable in teaching lessons and raising questions. These questions initiated an experimental programme, whose goals were to understand limiting physical processes and find techniques to overcome them. Results are presented, and the innovation of the progressive geometry readout technique, which this programme also spawned, is described. Progressive geometry readout devices, such as the Vernier anode, offer dramatically improved performance and have been successfully flight-proven. I describe the development of a Vernier readout for the J-PEX sounding rocket experiment, and discuss the instrument calibration and the flight programme. First investigations into a next generation of charge division readout design are presented. These devices will use charge comparison instead of amplitude measurement to further enhance resolution and count rate capability. In conclusion, I summarize the advances made during the course of this research, and discuss ongoing technological developments and further work which will enable MCP detectors to continue to excel where characteristics such as true photon-counting ability, high spatial resolution, format flexibility, and high temporal resolution are required

CMOS SINGLE-PHOTON AVALANCHE DIODES AND MICROMACHINED OPTICAL FILTERS FOR INTEGRATED FLUORESCENCE SENSING

This dissertation presents a body of work that addresses the two most pressing challenges in the field of integrated fluorescence sensing, namely, the design of integrated optical sensors and the fabrication of high-rejection micro-scale optical filters. Two novel enabling technologies were introduced. They are: the perimeter-gated single-photon avalanche diode (PGSPAD), for on-chip photon counting, and the benzotriazole (BTA)-doped thin-film polymer filter, for on-chip ultraviolet light rejection. Experimental results revealed that the PGSPAD front-end, fabricated in a 0.5 μm standard mixed-signal CMOS process, had the capability of counting photons in the MHz regime. In addition, it was found that a perimeter gate, a structural feature used to suppress edge breakdown in the diode, also maximized the signal-to-noise-ratio in the high-count rate regime whereas it maximized sensitivity at low count rates. On the other hand, BTA-doped filters were demonstrated utilizing three commonly used polymers as hosts. The filters were patternable, utilizing the same procedures traditionally used to pattern the undoped polymer hosts, a key advantage for integration into microsystems. Filter performance was analyzed using a set of metrics developed for optoelectronic characterization of integrated fluorescence sensors; high rejection levels (nearing -40 dB) of UV light were observed in films of only 5 μm in thickness. Ultimately, BTA-doped filters were integrated into a portable sensor, and their use was demonstrated in two types of bioassays

The ALICE TPC, a large 3-dimensional tracking device with fast readout for ultra-high multiplicity events

The design, construction, and commissioning of the ALICE Time-Projection Chamber (TPC) is described. It is the main device for pattern recognition, tracking, and identification of charged particles in the ALICE experiment at the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m3 and is operated in a 0.5 T solenoidal magnetic field parallel to its axis. In this paper we describe in detail the design considerations for this detector for operation in the extreme multiplicity environment of central Pb–Pb collisions at LHC energy. The implementation of the resulting requirements into hardware (field cage, read-out chambers, electronics), infrastructure (gas and cooling system, laser-calibration system), and software led to many technical innovations which are described along with a presentation of all the major components of the detector, as currently realized. We also report on the performance achieved after completion of the first round of stand-alone calibration runs and demonstrate results close to those specified in the TPC Technical Design Report.publishedVersio

NASA Tech Briefs, January 1995

Topics include: Sensors; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Report

INTEGRATION OF CMOS TECHNOLOGY INTO LAB-ON-CHIP SYSTEMS APPLIED TO THE DEVELOPMENT OF A BIOELECTRONIC NOSE

This work addresses the development of a lab-on-a-chip (LOC) system for olfactory sensing. The method of sensing employed is cell-based, utilizing living cells to sense stimuli that are otherwise not easily sensed using conventional transduction techniques. Cells have evolved over millions of years to be exquisitely sensitive to their environment, with certain types of cells producing electrical signals in response to stimuli. The core device that is introduced here is comprised of living olfactory sensory neurons (OSNs) on top of a complementary metal-oxide-semiconductor (CMOS) integrated circuit (IC). This hybrid bioelectronic approach to sensing leverages the sensitivity of OSNs with the electronic signal processing capability of modern ICs. Intimately combining electronics with biology presents a number of unique challenges to integration that arise from the disparate requirements of the two separate domains. Fundamentally the obstacles arise from the facts that electronic devices are designed to work in dry environments while biology requires not only a wet environment, but also one that is precisely controlled and non-toxic. Design and modeling of such heterogeneously integrated systems is complicated by the lack of tools that can address the multiple domains and techniques required for integration, namely IC design, fluidics, packaging, and microfabrication, and cell culture. There also arises the issue of how to handle the vast amount of data that can be generated by such systems, and specifically how to efficiently identify signals of interest and communicate them off-chip. The primary contributions of this work are the development of a new packaging scheme for integration of CMOS ICs into fluidic LOC systems, a methodology for cross-coupled multi-domain iterative modeling of heterogeneously integrated systems, demonstration of a proof-of-concept bioelectronic olfactory sensor, and a novel event-based technique to minimize the bandwidth required to communicate the information contained in bio-potential signals produced by dense arrays of electrically active cells