4,922 research outputs found
Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery
One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions
MonoPerfCap: Human Performance Capture from Monocular Video
We present the first marker-less approach for temporally coherent 3D
performance capture of a human with general clothing from monocular video. Our
approach reconstructs articulated human skeleton motion as well as medium-scale
non-rigid surface deformations in general scenes. Human performance capture is
a challenging problem due to the large range of articulation, potentially fast
motion, and considerable non-rigid deformations, even from multi-view data.
Reconstruction from monocular video alone is drastically more challenging,
since strong occlusions and the inherent depth ambiguity lead to a highly
ill-posed reconstruction problem. We tackle these challenges by a novel
approach that employs sparse 2D and 3D human pose detections from a
convolutional neural network using a batch-based pose estimation strategy.
Joint recovery of per-batch motion allows to resolve the ambiguities of the
monocular reconstruction problem based on a low dimensional trajectory
subspace. In addition, we propose refinement of the surface geometry based on
fully automatically extracted silhouettes to enable medium-scale non-rigid
alignment. We demonstrate state-of-the-art performance capture results that
enable exciting applications such as video editing and free viewpoint video,
previously infeasible from monocular video. Our qualitative and quantitative
evaluation demonstrates that our approach significantly outperforms previous
monocular methods in terms of accuracy, robustness and scene complexity that
can be handled.Comment: Accepted to ACM TOG 2018, to be presented on SIGGRAPH 201
2D-to-3D facial expression transfer
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Automatically changing the expression and physical features of a face from an input image is a topic that has been traditionally tackled in a 2D domain. In this paper, we bring this problem to 3D and propose a framework that given an input RGB video of a human face under a neutral expression, initially computes his/her 3D shape and then performs a transfer to a new and potentially non-observed expression. For this purpose, we parameterize the rest shape --obtained from standard factorization approaches over the input video-- using a triangular mesh which is further clustered into larger macro-segments. The expression transfer problem is then posed as a direct mapping between this shape and a source shape, such as the blend shapes of an off-the-shelf 3D dataset of human facial expressions. The mapping is resolved to be geometrically consistent between 3D models by requiring points in specific regions to map on semantic equivalent regions. We validate the approach on several synthetic and real examples of input faces that largely differ from the source shapes, yielding very realistic expression transfers even in cases with topology changes, such as a synthetic video sequence of a single-eyed cyclops.Peer ReviewedPostprint (author's final draft
LiveCap: Real-time Human Performance Capture from Monocular Video
We present the first real-time human performance capture approach that
reconstructs dense, space-time coherent deforming geometry of entire humans in
general everyday clothing from just a single RGB video. We propose a novel
two-stage analysis-by-synthesis optimization whose formulation and
implementation are designed for high performance. In the first stage, a skinned
template model is jointly fitted to background subtracted input video, 2D and
3D skeleton joint positions found using a deep neural network, and a set of
sparse facial landmark detections. In the second stage, dense non-rigid 3D
deformations of skin and even loose apparel are captured based on a novel
real-time capable algorithm for non-rigid tracking using dense photometric and
silhouette constraints. Our novel energy formulation leverages automatically
identified material regions on the template to model the differing non-rigid
deformation behavior of skin and apparel. The two resulting non-linear
optimization problems per-frame are solved with specially-tailored
data-parallel Gauss-Newton solvers. In order to achieve real-time performance
of over 25Hz, we design a pipelined parallel architecture using the CPU and two
commodity GPUs. Our method is the first real-time monocular approach for
full-body performance capture. Our method yields comparable accuracy with
off-line performance capture techniques, while being orders of magnitude
faster
GANVO: Unsupervised Deep Monocular Visual Odometry and Depth Estimation with Generative Adversarial Networks
In the last decade, supervised deep learning approaches have been extensively
employed in visual odometry (VO) applications, which is not feasible in
environments where labelled data is not abundant. On the other hand,
unsupervised deep learning approaches for localization and mapping in unknown
environments from unlabelled data have received comparatively less attention in
VO research. In this study, we propose a generative unsupervised learning
framework that predicts 6-DoF pose camera motion and monocular depth map of the
scene from unlabelled RGB image sequences, using deep convolutional Generative
Adversarial Networks (GANs). We create a supervisory signal by warping view
sequences and assigning the re-projection minimization to the objective loss
function that is adopted in multi-view pose estimation and single-view depth
generation network. Detailed quantitative and qualitative evaluations of the
proposed framework on the KITTI and Cityscapes datasets show that the proposed
method outperforms both existing traditional and unsupervised deep VO methods
providing better results for both pose estimation and depth recovery.Comment: ICRA 2019 - accepte
Recurrent 3D Pose Sequence Machines
3D human articulated pose recovery from monocular image sequences is very
challenging due to the diverse appearances, viewpoints, occlusions, and also
the human 3D pose is inherently ambiguous from the monocular imagery. It is
thus critical to exploit rich spatial and temporal long-range dependencies
among body joints for accurate 3D pose sequence prediction. Existing approaches
usually manually design some elaborate prior terms and human body kinematic
constraints for capturing structures, which are often insufficient to exploit
all intrinsic structures and not scalable for all scenarios. In contrast, this
paper presents a Recurrent 3D Pose Sequence Machine(RPSM) to automatically
learn the image-dependent structural constraint and sequence-dependent temporal
context by using a multi-stage sequential refinement. At each stage, our RPSM
is composed of three modules to predict the 3D pose sequences based on the
previously learned 2D pose representations and 3D poses: (i) a 2D pose module
extracting the image-dependent pose representations, (ii) a 3D pose recurrent
module regressing 3D poses and (iii) a feature adaption module serving as a
bridge between module (i) and (ii) to enable the representation transformation
from 2D to 3D domain. These three modules are then assembled into a sequential
prediction framework to refine the predicted poses with multiple recurrent
stages. Extensive evaluations on the Human3.6M dataset and HumanEva-I dataset
show that our RPSM outperforms all state-of-the-art approaches for 3D pose
estimation.Comment: Published in CVPR 201
GANerated Hands for Real-time 3D Hand Tracking from Monocular RGB
We address the highly challenging problem of real-time 3D hand tracking based
on a monocular RGB-only sequence. Our tracking method combines a convolutional
neural network with a kinematic 3D hand model, such that it generalizes well to
unseen data, is robust to occlusions and varying camera viewpoints, and leads
to anatomically plausible as well as temporally smooth hand motions. For
training our CNN we propose a novel approach for the synthetic generation of
training data that is based on a geometrically consistent image-to-image
translation network. To be more specific, we use a neural network that
translates synthetic images to "real" images, such that the so-generated images
follow the same statistical distribution as real-world hand images. For
training this translation network we combine an adversarial loss and a
cycle-consistency loss with a geometric consistency loss in order to preserve
geometric properties (such as hand pose) during translation. We demonstrate
that our hand tracking system outperforms the current state-of-the-art on
challenging RGB-only footage
- …