Resistive transport in a mesoscopic proximity superconductor

We review transport measurements in a normal metal (N) in contact with one or two superconducting (S) islands. From the experiment, we distinguish the Josephson coupling, the mesoscopic fluctuations and the proximity effect. In a loop-shaped N conductor, we observe large h/2e-periodic magnetoresistance oscillations that decay with temperature T with a 1/T power-law. This behaviour is the signature of the long-range coherence of the low-energy electron pairs induced by the Andreev reflection at the S interface. At temperature and voltage below the Thouless energy $\hbar D / L^2$, we observe the re-entrance of the metallic resistance. Experimental results agree with the linearized quasiclassical theory.Comment: 8 pages, 6 included epsf figures, Invited paper at the LT21 Conference, Praha, August 1996. To appear in Czech. J. of Phys. 46, Part S6 (1996

A duo of Potassium-responsive Histidine Kinases govern the multicellular destiny of Bacillus subtilis

Multicellular biofilm formation and surface motility are bacterial behaviors considered mutually exclusive. However, the basic decision to move over or stay attached to a surface is poorly understood. Here, we discover that in Bacillus subtilis, the key root biofilm-controlling transcription factor Spo0A~Pi (phosphorylated Spo0A) governs the flagellum-independent mechanism of social sliding motility. A Spo0A-deficient strain was totally unable to slide and colonize plant roots, evidencing the important role that sliding might play in natural settings. Microarray experiments plus subsequent genetic characterization showed that the machineries of sliding and biofilm formation share the same main components (i.e., surfactin, the hydrophobin BslA, exopolysaccharide, and de novo-formed fatty acids). Sliding proficiency was transduced by the Spo0A-phosphorelay histidine kinases KinB and KinC. We discovered that potassium, a previously known inhibitor of KinC-dependent biofilm formation, is the specific sliding-activating signal through a thus-far-unnoticed cytosolic domain of KinB, which resembles the selectivity filter sequence of potassium channels. The differential expression of the Spo0A~Pi reporter abrB gene and the different levels of the constitutively active form of Spo0A, Sad67, in Δspo0A cells grown in optimized media that simultaneously stimulate motile and sessile behaviors uncover the spatiotemporal response of KinB and KinC to potassium and the gradual increase in Spo0A~Pi that orchestrates the sequential activation of sliding, followed by sessile biofilm formation and finally sporulation in the same population. Overall, these results provide insights into how multicellular behaviors formerly believed to be antagonistic are coordinately activated in benefit of the bacterium and its interaction with the host.Fil: Grau, Roberto Ricardo. Universidad Nacional de Rosario. Facultad de Cs.bioquimicas y Farmaceuticas. Departamento de Microbiologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: de Oña, Paula. Universidad Nacional de Rosario. Facultad de Cs.bioquimicas y Farmaceuticas. Departamento de Microbiologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Kunert, Maritta. Instituto Max Planck Institut Fur Chemische Okologie; AlemaniaFil: Leñini, Cecilia Andrea. Universidad Nacional de Rosario. Facultad de Cs.bioquimicas y Farmaceuticas. Departamento de Microbiologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Gallegos Monterrosa, Ramses. Universitat Jena; AlemaniaFil: Mhatre, Eisha. Universitat Jena; AlemaniaFil: Vileta, Darío. Universidad Nacional de Rosario. Facultad de Cs.bioquimicas y Farmaceuticas. Departamento de Microbiologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Donato, Veronica. Universidad Nacional de Rosario. Facultad de Cs.bioquimicas y Farmaceuticas. Departamento de Microbiologia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Hölscher, Theresa. Universitat Jena; AlemaniaFil: Boland, Wilhem. Instituto Max Planck Institut Fur Chemische Okologie; AlemaniaFil: Kuipers, Oscar P.. University of Groningen; Países BajosFil: Kovács, Ákos T.. Universitat Jena; Alemani

Demography and disorders of the French Bulldog population under primary veterinary care in the UK in 2013

Abstract Background Despite its Gallic name, the French Bulldog is a breed of both British and French origin that was first recognised by The Kennel Club in 1906. The French Bulldog has demonstrated recent rapid rises in Kennel Club registrations and is now (2017) the second most commonly registered pedigree breed in the UK. However, the breed has been reported to be predisposed to several disorders including ocular, respiratory, neurological and dermatological problems. The VetCompass™ Programme collates de-identified clinical data from primary-care veterinary practices in the UK for epidemiological research. Using VetCompass™ clinical data, this study aimed to characterise the demography and common disorders of the general population of French Bulldogs under veterinary care in the UK. Results French Bulldogs comprised 2228 (0.49%) of 445,557 study dogs under veterinary care during 2013. Annual proportional birth rates showed that the proportional ownership of French Bulldog puppies rose steeply from 0.02% of the annual birth cohort attending VetCompass™ practices in 2003 to 1.46% in 2013. The median age of the French Bulldogs overall was 1.3 years (IQR 0.6–2.5, range 0.0–13.0). The most common colours of French Bulldogs were brindle (solid or main) (32.36%) and fawn (solid or main) (29.9%). Of the 2228 French Bulldogs under veterinary care during 2013, 1612 (72.4%) had at least one disorder recorded. The most prevalent fine-level precision disorders recorded were otitis externa (14.0%, 95% CI: 12.6–15.5), diarrhoea (7.5%, 95% CI: 6.4–8.7), conjunctivitis (3.2%, 95% CI: 2.5–4.0), nails overlong (3.1%, 95% CI% 2.4–3.9) and skin fold dermatitis (3.0%, 95% CI% 2.3–3.8). The most prevalent disorder groups were cutaneous (17.9%, 95% CI: 16.3–19.6), enteropathy (16.7%, 95% CI: 15.2–18.3), aural (16.3%, 95% CI: 14.8–17.9), upper respiratory tract (12.7%, 95% CI: 11.3–14.1) and ophthalmological (10.5%, 95% CI: 9.3–11.9). Conclusions Ownership of French Bulldogs in the UK is rising steeply. This means that the disorder profiles reported in this study reflect a current young UK population and are likely to shift as this cohort ages. Otitis externa, diarrhoea and conjunctivitis were the most common disorders in French Bulldogs. Identification of health priorities based on VetCompass™ data can support evidence–based reforms to improve health and welfare within the breed

Pressure-induced spin transition and site-selective metallization in CoCl2

The interplay between spin states and metallization in compressed CoCl 2 is investigated by combining diffraction, resistivity and spectroscopy techniques under high-pressure conditions and ab-initio calculations. A pressure-induced metallization along with a Co 2+ high-spin (S = 3/2) to low-spin (S = 1/2) crossover transition is observed at high pressure near 70 GPa. This metallization process, which is associated with the p-d charge-transfer band gap closure, maintains the localization of 3d electrons around Co 2+ , demonstrating that metallization and localized Co 2+ -3d low-spin magnetism can coexist prior to the full 3d-electron delocalization (Mott-Hubbard d-d breakdown) at pressures greater than 180 GPa.Financial support from the Spanish Ministerio de Economıa y Competitividad (Project No. MAT2015-69508-P, MAT2016-80438-P) and MALTA-CONSOLIDER (Ref. No. MAT2015-71070-REDC) is acknowledged

The Type and the Position of HNF1A Mutation Modulate Age at Diagnosis of Diabetes in Patients with Maturity-Onset Diabetes of the Young (MODY)-3

OBJECTIVE—The clinical expression of maturity-onset diabetes of the young (MODY)-3 is highly variable. This may be due to environmental and/or genetic factors, including molecular characteristics of the hepatocyte nuclear factor 1-α (HNF1A) gene mutation. RESEARCH DESIGN AND METHODS—We analyzed the mutations identified in 356 unrelated MODY3 patients, including 118 novel mutations, and searched for correlations between the genotype and age at diagnosis of diabetes. RESULTS—Missense mutations prevailed in the dimerization and DNA-binding domains (74%), while truncating mutations were predominant in the transactivation domain (62%). The majority (83%) of the mutations were located in exons 1- 6, thus affecting the three HNF1A isoforms. Age at diagnosis of diabetes was lower in patients with truncating mutations than in those with missense mutations (18 vs. 22 years, P = 0.005). Missense mutations affecting the dimerization/DNA-binding domains were associated with a lower age at diagnosis than those affecting the transactivation domain (20 vs. 30 years, P = 10−4). Patients with missense mutations affecting the three isoforms were younger at diagnosis than those with missense mutations involving one or two isoforms (P = 0.03). CONCLUSIONS—These data show that part of the variability of the clinical expression in MODY3 patients may be explained by the type and the location of HNF1A mutations. These findings should be considered in studies for the search of additional modifier genetic factors

Validity and Reliability of Dermoscopic Criteria Used to Differentiate Nevi From Melanoma: A Web-Based International Dermoscopy Society Study.

IMPORTANCE: The comparative diagnostic performance of dermoscopic algorithms and their individual criteria are not well studied. OBJECTIVES: To analyze the discriminatory power and reliability of dermoscopic criteria used in melanoma detection and compare the diagnostic accuracy of existing algorithms. DESIGN, SETTING, AND PARTICIPANTS: This was a retrospective, observational study of 477 lesions (119 melanomas [24.9%] and 358 nevi [75.1%]), which were divided into 12 image sets that consisted of 39 or 40 images per set. A link on the International Dermoscopy Society website from January 1, 2011, through December 31, 2011, directed participants to the study website. Data analysis was performed from June 1, 2013, through May 31, 2015. Participants included physicians, residents, and medical students, and there were no specialty-type or experience-level restrictions. Participants were randomly assigned to evaluate 1 of the 12 image sets. MAIN OUTCOMES AND MEASURES: Associations with melanoma and intraclass correlation coefficients (ICCs) were evaluated for the presence of dermoscopic criteria. Diagnostic accuracy measures were estimated for the following algorithms: the ABCD rule, the Menzies method, the 7-point checklist, the 3-point checklist, chaos and clues, and CASH (color, architecture, symmetry, and homogeneity). RESULTS: A total of 240 participants registered, and 103 (42.9%) evaluated all images. The 110 participants (45.8%) who evaluated fewer than 20 lesions were excluded, resulting in data from 130 participants (54.2%), 121 (93.1%) of whom were regular dermoscopy users. Criteria associated with melanoma included marked architectural disorder (odds ratio [OR], 6.6; 95% CI, 5.6-7.8), pattern asymmetry (OR, 4.9; 95% CI, 4.1-5.8), nonorganized pattern (OR, 3.3; 95% CI, 2.9-3.7), border score of 6 (OR, 3.3; 95% CI, 2.5-4.3), and contour asymmetry (OR, 3.2; 95% CI, 2.7-3.7) (P < .001 for all). Most dermoscopic criteria had poor to fair interobserver agreement. Criteria that reached moderate levels of agreement included comma vessels (ICC, 0.44; 95% CI, 0.40-0.49), absence of vessels (ICC, 0.46; 95% CI, 0.42-0.51), dark brown color (ICC, 0.40; 95% CI, 0.35-0.44), and architectural disorder (ICC, 0.43; 95% CI, 0.39-0.48). The Menzies method had the highest sensitivity for melanoma diagnosis (95.1%) but the lowest specificity (24.8%) compared with any other method (P < .001). The ABCD rule had the highest specificity (59.4%). All methods had similar areas under the receiver operating characteristic curves. CONCLUSIONS AND RELEVANCE: Important dermoscopic criteria for melanoma recognition were revalidated by participants with varied experience. Six algorithms tested had similar but modest levels of diagnostic accuracy, and the interobserver agreement of most individual criteria was poor

A dimensioning and tolerancing methodology for concurrent engineering applications I: problem representation

This paper is the first of two which present a methodology for determining the dimensional specifications of all the component parts and sub-assemblies of a product according to their dimensional requirements. To achieve this goal, two major steps are followed, each of which is described in a paper. In the first paper, all relationships necessary for finding the values of dimensions and tolerances are represented in a matrix form, known as a Dimensional Requirements/Dimensions (DR/D) matrix. In the second paper, the values of individual dimensions and tolerances are determined by applying a comprehensive solution strategy to satisfy all the relationships represented in the DR/D matrix. The methodology is interactive and suitable for use in a concurrent engineering (CE) environment. The graphical tool presented in this paper will assist a CE team in visualizing the overall D&T problem and foreseeing the ramifications of decisions regarding the selection of dimensions and tolerances. This will assist the CE team to systematically determine all the controllable variables, such as dimensions, tolerances, and manufacturing processes

A dimensioning and tolerancing methodology for concurrent engineering applications II: comprehensive solution strategy

Dimensioning and tolerancing (D&T) is a multidisciplinary problem which requires the fulfillment of a large number of dimensional requirements. However, almost all of the currently available D&T tools are only intended for use by the designer. In addition, they typically provide solutions for the requirements one at time. This paper presents a methodology for determining the dimensional specifications of the component parts and sub-assemblies of a product by satisfying all of its requirements. The comprehensive solution strategy presented here includes: a strategy for separating D&T problems into groups, the determination of an optimum solution order for coupled functional equations, a generic tolerance allocation strategy, and strategies for solving different types of D&T problems. A number of commonly used cost minimization strategies, such as the use of standard parts, preferred sizes, preferred fits, and preferred tolerances, have also been incorporated into the proposed methodology. The methodology is interactive and intended for use in a concurrent engineering environment by members of a product development team