848 research outputs found
Microreactor cells for high throughput x-ray absorption spectroscopy
High-throughput experimentation has been applied to X-ray Absorption spectroscopy as a novel route for increasing research productivity in the catalysis community. Suitable instrumentation has been developed for the rapid determination of the local structure in the metal component of precursors for supported catalysts. An automated analytical workflow was implemented that is much faster than traditional individual spectrum analysis. It allows the generation of structural data in quasi-real time. We describe initial results obtained from the automated high throughput (HT) data reduction and analysis of a sample library implemented through the 96 well-plate industrial standard. The results show that a fully automated HT-XAS technology based on existing industry standards is feasible and useful for the rapid elucidation of geometric and electronic structure of materials
pH and Solvent Influence on p-Aminobenzoic Acid
Through X-ray absorption and emission spectroscopies, the chemical, electronic
and structural properties of organic species in solution can be observed.
Near-edge X-ray absorption fine structure (NEXAFS) and resonant inelastic
X-ray scattering (RIXS) measurements at the nitrogen K-edge of para-
aminobenzoic acid reveal both pH- and solvent-dependent variations in the
ionisation potential (IP), 1sâÏ* resonances and HOMOâLUMO gap. These changes
unequivocally identify the chemical species (neutral, cationic or anionic)
present in solution. It is shown how this incisive chemical state sensitivity
is further enhanced by the possibility of quantitative bond length
determination, based on the analysis of chemical shifts in IPs and Ï*âshape
resonances in the NEXAFS spectra. This provides experimental access to
detecting even minor variations in the molecular structure of solutes in
solution, thereby providing an avenue to examining computational predictions
of solute properties and soluteâsolvent interactions
Fenton-Like Oxidation of 4âChlorophenol: Homogeneous or Heterogeneous?
Heterogeneous Fenton-like catalysts have received considerable research attention because they could potentially be attractive for oxidative removal of organic contaminants from tertiary wastewater. However, process design is still hampered by insufficient understanding of the chemical pathways involved, and especially whether oxidation activity stems from heterogeneous surface chemistry or minute concentrations of dissolved metal ions in the homogeneous phase. Using inductively coupled plasma-optical emission spectroscopy (ICP-OES) in combination with pH monitoring and ultravioletâvisible spectroscopy (UVâvis) we have monitored the degradation of 4-chlorophenol (4-CP) over two Fenton-like heterogeneous systems, namely FeOx supported on TiO2 and CuFe2O4. We show conclusively that these systems proceed predominantly through a homogeneous route via dissolved metal ions from the solid phase catalysts. Control experiments with homogeneous Fe3+ or Cu2+ systems reveal that even minute concentrations (ÎŒM/subppm) of dissolved metal ions leached from the solid phases account for the observed 4-CP degradation rates in the heterogeneous systems. ICP-OES revealed that metal leaching was time-dependent and variable because of pH variations associated with changing acid release rates. Buffering solutions at pH 7.4 suppressed metal leaching (and hence 4-CP degradation) in the FeOx/TiO2 system, but not in others. For example, pH buffering did not entirely suppress metal leaching from CuFe2O4, for which 4-CP degradation was retained through small concentrations of Fe and Cu ions in solution. Our results highlight the importance of careful monitoring of metal content in the aqueous phase, certainly with analytical sensitivity below ppm concentrations of the dissolved metals, and also the crucial influence of time-dependent pH variations on the reaction process. Recyclability of catalysts, pH buffering of solutions or monitoring of metal content in the solid phase by less sensitive analytical methods, for example, chemical analysis, gravimetry, X-ray fluorescence, or energy dispersive X-ray analysis in electron microscopes, cannot exclude the homogeneous Fenton route in the presence of solid catalysts
Mechanically Induced Amorphization of Diaqua-bis(Omeprazolate)-Magnesium Dihydrate
The influence of milling diaqua-bis(omeprazolate)-magnesium dihydrate (DABOMD), an active pharmaceutical ingredient (API), was investigated. DABOMD was processed in a planetary ball mill at different milling times, from 1 to 300 min. The milling process resulted in a prominent comminution (size reduction) and amorphization of the API. DABOMD amorphization was identified with various characterization techniques including thermogravimetric analysis, differential scanning calorimetry, powder X-ray diffraction, and attenuated total reflection-Fourier transform infrared spectroscopy. The solidâsolid crystalline to amorphous phase transformation is driven by compression, shear stresses, and heat generated in the planetary ball mill. This leads to distortion and breakage of hydrogen bonds, release of water molecules from the crystalline lattice of DABOMD and the accumulation of defects, and eventually a collapse of the crystalline order. Model fitting of the kinetics of comminution and the amorphization of DABOMD revealed a series of events: a rapid comminution at the start of milling driven by crystal cleavage of DABOMD, followed by partial amorphization, which is driven by rapid water diffusion, and subsequently, a slow steady comminution and amorphization
NEXAFS Sensitivity to Bond Lengths in Complex Molecular Materials: A Study of Crystalline Saccharides
Detailed analysis of the C K near-edge X-ray absorption fine structure (NEXAFS) spectra of a series of saccharides (fructose, xylose, glucose, galactose, maltose monohydrate, α-lactose monohydrate, anhydrous ÎČ-lactose, cellulose) indicates that the precise determination of IPs and Ï* shape resonance energies is sensitive enough to distinguish different crystalline saccharides through the variations in their average CâOH bond lengths. Experimental data as well as FEFF8 calculations confirm that bond length variations in the organic solid state of 10â2 Ă
can be experimentally detected, opening up the possibility to use NEXAFS for obtaining incisive structural information for molecular materials, including noncrystalline systems without long-range order such as dissolved species in solutions, colloids, melts, and similar amorphous phases. The observed bond length sensitivity is as good as that originally reported for gas-phase and adsorbed molecular species. NEXAFS-derived molecular structure data for the condensed phase may therefore be used to guide molecular modeling as well as to validate computationally derived structure models for such systems. Some results indicate further analytical value in that the Ï* shape resonance analysis may distinguish hemiketals from hemiacetals (i.e., derived from ketoses and aldoses) as well as α from ÎČ forms of otherwise identical saccharides
Electrochemical Insight into the Brust-Schiffrin Synthesis of Au Nanoparticles
The mechanism of the BrustâSchiffrin gold nanoparticle synthesis has been investigated through the use of ion transfer voltammetry at the water/1,2-dichloroethane (DCE) solution interface, combined with X-ray absorption fine structure (XAFS) of the reaction between [AuCl4]â and thiol (RSH) in homogeneous toluene (TL) solution. Ion transfer calculations indicate the formation of [AuCl2]â at RSH/Au ratios from 0.2â2 with a time-dependent variation observed over several days. At RSH/Au ratios above 2 and after time periods greater than 24 h, the formation of Au(I)SR is also observed. The relative concentrations of reaction products observed at the liquid/liquid interface are in excellent agreement with those observed by XAFS for the corresponding reaction in a single homogeneous phase. BH4â ion transfer reactions between water and DCE indicate that the reduction of [AuCl4]â or [AuCl2]â to Au nanoparticles by BH4â proceeds in the bulk organic phase. On the other hand, BH4â was unable to reduce the insoluble [Au(I)SR]n species to Au nanoparticles. The number and size of the nanoparticles formed was dependent on the concentration ratio of RSH/Au, as well as the experimental duration because of the competing formation of the [Au(I)SR]n precipitate. Higher concentrations of nanoparticles, with diameters of 1.0â1.5 nm, were formed at RSH/Au ratios from 1 to 2
Intermolecular Bonding of Hemin in Solution and in Solid State Probed by N K-edge X-ray Spectroscopies
X-ray absorption/emission spectroscopy (XAS/XES) at the N K-edge of iron protoporphyrin IX chloride (FePPIX-Cl, or hemin) has been carried out for dissolved monomers in DMSO, dimers in water and for the solid state. This sequence of samples permits identification of characteristic spectral features associated with the hemin intermolecular bonding. These characteristic features are further analyzed and understood at the molecular orbital (MO) level based on the DFT calculations
Proton Transfer, Hydrogen Bonding, and Disorder: Nitrogen Near-Edge X-ray Absorption Fine Structure and X-ray Photoelectron Spectroscopy of Bipyridine-Acid Salts and Co-crystals
The sensitivity of near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to BrĂžnsted donation and the protonation state of nitrogen in the solid state is investigated through a series of multicomponent bipyridineâacid systems alongside X-ray photoelectron spectroscopy (XPS) data. A large shift to high energy occurs for the 1s â 1Ï* resonance in the nitrogen K-edge NEXAFS with proton transfer from the acid to the bipyridine base molecule and allows assignment as a salt (CâNH+), with the peak ratio providing the stoichiometry of the types of nitrogen species present. A corresponding binding energy shift for CâNH+ is observed in the nitrogen XPS, clearly identifying protonation and formation of a salt. The similar magnitude shifts observed with both techniques relative to the unprotonated nitrogen of co-crystals (CâN) suggest that the chemical state (initial-state) effects dominate. Results from both techniques reveal the sensitivity to identify proton transfer, hydrogen bond disorder, and even the potential to distinguish variations in hydrogen bond length to nitrogen
The effect of the geomagnetic field on cosmic ray energy estimates and large scale anisotropy searches on data from the Pierre Auger Observatory
We present a comprehensive study of the influence of the geomagnetic field on
the energy estimation of extensive air showers with a zenith angle smaller than
, detected at the Pierre Auger Observatory. The geomagnetic field
induces an azimuthal modulation of the estimated energy of cosmic rays up to
the ~2% level at large zenith angles. We present a method to account for this
modulation of the reconstructed energy. We analyse the effect of the modulation
on large scale anisotropy searches in the arrival direction distributions of
cosmic rays. At a given energy, the geomagnetic effect is shown to induce a
pseudo-dipolar pattern at the percent level in the declination distribution
that needs to be accounted for.Comment: 20 pages, 14 figure
High-throughput microarray technology in diagnostics of enterobacteria based on genome-wide probe selection and regression analysis
- âŠ