Characterisation of charging kinetics of dielectrics under continuous electron irradiation through real time electron emission collecting method

Dielectric materials used for spacecraft applications are often characterised under electron irradiation in order to study their physical and electrical mechanisms. For surface potential measurement, a small removable flat device based on the secondary electron spectrometer method has been developed and installed in the CEDRE irradiation test facility at ONERA (Toulouse, France). This technique was developed to get rid off specific issues inherent to the Kelvin Probe technique. This experimental device named REPA (Repulsive Electron Potential Analyser) allows in situ and real time assessment of the surface potential built up on dielectric materials under continuous electron irradiation. A calibration has been performed in order to validate this experimental setup. Furthermore, to optimise its efficiency, the physical behaviour of this device has been modelled and numerically simulated using Particle In Cell (PIC) model and a dedicated numerical code called SPIS (Spacecraft Plasma Interactions System). In a final step, electrical characterisations of a charged dielectric have been carried out under continuous electron irradiation with this new method. These results have been compared with measurements performed in same experimental conditions with conventional Kelvin Probe method. The experimental results have been discussed in this paper. To conclude, advantages of this experimental setup in regard of this application will be emphasised

Lock-in thermography as a tool for fatigue damage monitoring of composite structures

International audienceFatigue dimensioning of composite structures has become a great challenge in the aeronautic industry. The estimation of the fatigue limit requires time-consuming experimental campaigns: millions of mechanical cycles are applied to one studied sample until failure, for several load levels. The alternative discussed in the present paper is to monitor the self-heating of carbon/epoxy composites under a significantly reduced number of load cycles, in order to define fatigue damage indicators. The chosen approach is to use lock-in thermography, which makes it possible to analyse the first harmonics of the heating signal, not matter how noisy it might be

Electrical Properties of Annealed and Coated Boron Nitride under Electron Beam Irradiation

Technical dielectric materials and ceramics are used in many different high technology industrial areas and especially for spacecraft applications. On satellites, these materials are subjected to extreme conditions due to the space plasma environment. To survive, these ceramic insulators must have exceptional electrical and thermal properties. Boron Nitride (BN) and Aluminum Oxide (Al2O3) are used in particular because they combine good electrical insulation and high thermal conductivity. However, BN and Al2O3 used in spacecraft interiors are exposed to critical radiation demands, where these insulators are irradiated by electrons with high energies and flux. Charged particles are trapped in the ceramics, producing high electric fields. Subsequently, internal disturbances and electrical breakdowns can occur. Over time, these phenomena may cause degradation or failure of various components and embedded systems. Consequently, this study endeavors to understand the physical mechanisms which occur in these ceramics materials under electron irradiation. These dielectrics materials have been characterized at ONERA Toulouse (DESP) in the CEDRE (Chambre d’Etude De Revêtement Electrisés) irradiation chamber. A parametric study was performed to assess the influence of incident energy and flux, temperature, coatings, annealing, and ionizing dose on the charging and relaxation kinetics of BN and Al2O3. Surface and thermal treatments were found to limit BN’s charging. Dedicated treatments enhanced charge transport. To identify the effect of thermal annealing on electrical behavior in these materials, a thorough study of electron trapping processes was performed using cathodoluminescence in the Electron Emission Test facility at Utah State University. These tests explored differences in the nature and density of defect states. Together, these investigations determined correlations between chemical, structural and physical properties for each insulator’s configurations. Further, we observed degradation of coatings and an evolution of the concentration of their chemical defects. Contamination and ageing effects were identified on the rough material surfaces of ceramics exposed under a critical electron flux. Therefore, treatments applied to optimize electrical properties were found to be ineffective, especially for long-term charging mitigation. We will discuss these results and compare them for each ceramic configuration. The goal of this investigation is to understand the predominant physical mechanisms and main structural and chemical differences between these ceramic configurations in order to perform an exhaustive correlation between the properties. In future studies, we propose to define a defect-based model which can be used to optimize a material to limit both its charging and degradation over the time

Electrical Properties Study under Electron Beam of Annealed and Coated Boron Nitride

The charging and relaxation kinetics of pyrolytic boron nitride (BN) substrates, BN with an aluminium oxide (BN/Al2O3) coating, and thermally-annealed alumina-coated boron nitride (an-BN/Al2O3) were investigated under low power electron irradiation (5 \u3c E0 \u3c 20 keV, Ji = 10 nA.cm-2 at room temperature) in the CEDRE facility at ONERA (Toulouse, France). Surface potentials of each ceramics configuration were measured over time using the Kelvin probe method. The influence of coating and annealing treatments to limit charging is discussed in this paper. A thorough study of a an–BN/Al2O3 sample was carried out under a critical electron flux (E0 = 20 keV, Ji = 750 nA.cm-2) in order to assess the degradation kinetics of the material’s electrical properties. The characterisations of an–BN/Al2O3 samples were performed before and after electrical aging at CIRIMAT (Toulouse, France) to identify the structural and chemical evolution which would explain this degradation. A chemical deterioration of coating and some contaminants were evidenced after the critical irradiation

Cathodoluminescence Studies of Defects in Coated Boron Nitride

Optical emission properties of Boron Nitride (BN) substrates, BN with alumina (Al2O3) coating, and thermally-annealed alumina-coated boron nitride (an-BN/Al2O3) were investigated under electron irradiation using cathodoluminescence (CL) measurements. Tests were performed temperatures ranging from ~100 K to ~300 K, with monoenergetic beams from 5 keV to 30 keV, and electron flux densities from 1 nA.cm-2 to 500 nA.cm-2. These experiments were conducted to identify the effects of coating and thermal annealing on the nature and occupation of defect states in different samples with BN substrates. Previous studies have shown that these treatments can limit the charging of BN substrates. Consequently, thorough investigations of electron trapping and recombination processes as a function of low temperature, dose and charging/discharge were performed in order to explain the differences of electrical behaviour and compare the CL spectra of the three different samples studied. Broad features associated with the BN and sharper features resulting from the annealed alumina coating were observed. Changes in the intensity, energy, and width of the features with sample treatments were observed. Different incident beam parameters were used to associate these features with specific types of defect states. The effects of charging, temperature- and dose-dependent conductivity, and thermal annealing and aging of the samples on the CL spectra were investigated. These were used to study defect creation and occupation and to understand the predominant physical mechanisms and main structural and chemical differences between these ceramic configurations

Wireless strain and temperature monitoring in reinforced concrete using Surface Acoustic Wave (SAW) sensors

Monitoring the health of civil engineering structures using implanted deformation, temperature and corrosion sensors would further improve maintenance and extend the service life of those structures. However, sensor integration poses a number of problems, due to the presence of cables and on-board electronics. Passive, wireless SAW sensors offer a very promising solution, here. We used commercial SAW devices mounted on steel rebars to carry out an initial feasibility study. Without cables or embedded electronics, we were able to measure the deformation of a concrete beam subjected to bending load. We were also able to measure the temperature continuously over a three-week period

Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean

Seawater Mg:Ca and Sr:Ca ratios are biogeochemical parameters reflecting the Earth–ocean–atmosphere dynamic exchange of elements. The ratios’ dependence on the environment and organisms' biology facilitates their application in marine sciences. Here, we present a measured single-laboratory dataset, combined with previous data, to test the assumption of limited seawater Mg:Ca and Sr:Ca variability across marine environments globally. High variability was found in open-ocean upwelling and polar regions, shelves/neritic and river-influenced areas, where seawater Mg:Ca and Sr:Ca ratios range from ∼4.40 to 6.40 mmol:mol and ∼6.95 to 9.80 mmol:mol, respectively. Open-ocean seawater Mg:Ca is semiconservative (∼4.90 to 5.30 mol:mol), while Sr:Ca is more variable and nonconservative (∼7.70 to 8.80 mmol:mol); both ratios are nonconservative in coastal seas. Further, the Ca, Mg, and Sr elemental fluxes are connected to large total alkalinity deviations from International Association for the Physical Sciences of the Oceans (IAPSO) standard values. Because there is significant modern seawater Mg:Ca and Sr:Ca ratios variability across marine environments we cannot absolutely assume that fossil archives using taxa-specific proxies reflect true global seawater chemistry but rather taxa- and process-specific ecosystem variations, reflecting regional conditions. This variability could reconcile secular seawater Mg:Ca and Sr:Ca ratio reconstructions using different taxa and techniques by assuming an error of 1 to 1.50 mol:mol, and 1 to 1.90 mmol:mol, respectively. The modern ratios’ variability is similar to the reconstructed rise over 20 Ma (Neogene Period), nurturing the question of seminonconservative behavior of Ca, Mg, and Sr over modern Earth geological history with an overlooked environmental effect

Correction for Lebrato et al., Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean

4 pages, 5 figures.-- Correction Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean; Proceedings of the National Academy of Sciences of the USA 117(36): 22281-22292 (2020); doi: 10.1073/pnas.1918943117; http://hdl.handle.net/10261/221953The authors wish to note the following: “This study’s seawater Sr:Ca values were systematically low as a consequence of normalization to another published low value for the International Association for the Physical Sciences of the Oceans (IAPSO) (1). IAPSO has been used at the Ocean Drilling Program, Texas A&M University (ODP-TAMU) (http://www-odp.tamu.edu/), and is still being used as the primary standard for elemental composition of seawater/interstitial water. Consequently, our seawater value of Sr:Ca = 8.28 mmol:mol was systematically low by approx. 3.70%, if we accept seawater Sr:Ca 8.60 mmol:mol as the recommended value for IAPSO North Atlantic surface water salinity standard. The uncertainty budget should be expanded including the uncertainty of IAPSO composition. The largest contribution to expanded uncertainty of our data comes from the uncertainty of the IAPSO reference composition, which is 3.29% using all published values. This will result in 3.30% (1 SD) expanded uncertainty for seawater Sr:Ca (and 0.5%, for seawater Mg:Ca) of the entire data set with respect to accuracy. We have corrected all seawater Sr:Ca values with a factor of 1.0243 in all our tables (e.g., SI Appendix, Table S1 averages) and in the figures (Fig. 4, Fig. 5), where a ratio was used. Note that the seawater Sr:Ca % changes are small, thus changes are hardly noticeable on large displays (e.g., Figures), but they can be seen in the tables and averages/SD calculations. Seawater Sr:Ca ratios are also corrected in the main text where relevantPeer reviewe

Détermination de la résistance de compression longitudinale d'un pli UD Carbone/Epoxy à partir d'un essai de traction sur stratifié

International audienc