157 research outputs found
Modeling the impact of sub-grid scale emission variability on upper-air concentration
International audienceThe long standing issue of sub-grid emission heterogeneity and its influence to upper air concentration is addressed here and a subgrid model proposed. The founding concept of the approach is the assumption that average emission act as source terms of average concentration, emission fluctuations are source for the concentration variance. The model is based on the derivation of the sub-grid contribution of emission and the use of the concentration variance equation to transport it in the atmospheric boundary layer. The model has been implemented in an existing mesoscale model and the results compared with Large-Eddy Simulation data for ad-hoc simulation devised to test specifically the parametrization. The results show an excellent agreement of the models. For the first time a time evolving error bar reproducing the sub-grid scale heterogeneity of the emissions and the way in which it affects the concentration has been shown. The concentration variance is presented as an extra attribute to better define the mean concentrations in a Reynolds-average model. The model has applications from meso to global scale and that go beyond air quality
Highly resolved WRF-BEP/BEM simulations over Barcelona urban area with LCZ
Unidad de excelencia María de Maeztu CEX2019-000940-MThis study evaluates the performance of urban schemes integrated in the Weather Research and Forecasting model (WRF) using Local Climate Zones (LCZ) as land use classification. We applied two multi-layer urban schemes: 1) Building Effect Parameterization (BEP) and 2) Building Energy Model coupled with BEP (BEP + BEM), over the Metropolitan Area of Barcelona (MAB) at 1km2 horizontal resolution for July 2016. These two simulations were compared with observations and a standard WRF simulation (BULK approach). Corine Land Cover 2012 provides background information for the entire simulation domain, while the LCZ covers MAB classifying the land cover into 10 classes according to urban morphology and thermal properties. BULK and multi-layer urban scheme experiments present a similar general error trend: overestimation of relative humidity and planetary boundary layer height and underestimation of temperature. Although BEP has the best correlation with observations, this is the scheme with the highest value of bias and RMSE for temperature and relative humidity, in particular during the night/morning. On the other hand, BEP + BEM performed with the minimum RMSE associated for temperature and relative humidity in the entire domain. BEP + BEM has shown to be more sensitive than the other schemes over locations where the land use in the model grid differs to the real one, which is a common consequent limitation of horizontal model resolution. This study also suggests that depending on the synoptic condition the scheme accuracy on determining PBLH might change considerably
Effects of anthropogenic heat due to air-conditioning systems on an extreme high temperature event in Hong Kong
Anthropogenic heat flux is the heat generated by human activities in the urban canopy layer, which is considered the main contributor to the urban heat island (UHI). The UHI can in turn increase the use and energy consumption of air-conditioning systems. In this study, two effective methods for water-cooling air-conditioning systems in non-domestic areas, including the direct cooling system and central piped cooling towers (CPCTs), are physically based, parameterized, and implemented in a weather research and forecasting model at the city scale of Hong Kong. An extreme high temperature event (June 23-28, 2016) in the urban areas was examined, and we assessed the effects on the surface thermal environment, the interaction of sea-land breeze circulation and urban heat island circulation, boundary layer dynamics, and a possible reduction of energy consumption. The results showed that both water-cooled air-conditioning systems could reduce the 2 m air temperature by around 0.5 degrees C-0.8 degrees C during the daytime, and around 1.5 degrees C around 7:00-8:00 pm when the planetary boundary layer (PBL) height was confined to a few hundred meters. The CPCT contributed around 80%-90% latent heat flux and significantly increased the water vapor mixing ratio in the atmosphere by around 0.29 g kg(-1) on average. The implementation of the two alternative air-conditioning systems could modify the heat and momentum of turbulence, which inhibited the evolution of the PBL height (a reduction of 100-150m), reduced the vertical mixing, presented lower horizontal wind speed and buoyant production of turbulent kinetic energy, and reduced the strength of sea breeze and UHI circulation, which in turn affected the removal of air pollutants. Moreover, the two alternative air-conditioning systems could significantly reduce the energy consumption by around 30% during extreme high temperature events. The results of this study suggest potential UHI mitigation strategies and can be extended to other megacities to enable them to be more resilient to UHI effects.
Reply to Comment by Velasco on “High-Resolution, Multilayer Modeling of Singapore’s Urban Climate Incorporating Local Climate Zones”
In response to the comment on our paper “High‐resolution, multilayer modeling of Singapore's urban climate incorporating local climate zones,” we provide detailed response to each of the incorrect accusations with scientifically based evidence. We have evaluated our model using all the available observational data, and the results showed good agreement. Our modeling study includes assumptions, as all modeling work does, and we have discussed their rationales and possible implications
AN URBAN SURFACE EXCHANGE PARAMETERISATION FOR MESOSCALE MODELS
A scheme to represent the impact of urban buildings on airflow in mesoscale atmospheric
models is presented. In the scheme, the buildings are not explicitly resolved, but their effects on the grid-averaged variables are parameterised. An urban quarter is characterised by a horizontal building size, a street canyon width and a building density as a function of height. The module computes the impact of the horizontal (roof and canyon floor) and vertical (walls) surfaces on the wind speed, temperature and turbulent kinetic energy. The computation of the shortwave and longwave radiation, needed to compute the temperature of the urban surfaces, takes into account the shadowing and radiation trapping effects induced by the urban canyons. The computation of the turbulent length scales in the TKE equation is also modified to take into account the presence of the buildings. The parameterisation is introduced into a mesoscale model and tested in a bidimensional case
of a city over flat terrain. The new parameterisation is shown to be able to reproduce the most important features observed in urban areas better than the traditional approach which is based only on the modification of the roughness length, thereby retaining the Monin–Obukhov similarity theory. The new surface exchange parameterisation is furthermore shown to have a strong impact on the dispersion characteristics of air pollutants in urban areas
Effect of Sea Breeze on Air Pollution in the Greater Athens Area. Part II: Analysis of Different Emission Scenarios
The Mediterranean Campaign of Photochemical Tracers–Transport and Chemical Evolution that took place in the greater Athens area from 20 August to 20 September 1994 has confirmed the role of sea-breeze circulation in photochemical smog episodes that had been suggested already by a number of experiments and numerical studies. The meteorological and photochemical modeling of this campaign were discussed in Part I. Part II focuses on the study of the 14 September photochemical smog event associated with a sea-breeze circulation. The objective of the study is to identify and to understand better the nonlinear processes that produce high ozone concentrations. In particular, the effect of land and sea breezes is investigated by isolating the effect of nighttime and daytime emissions on ozone concentrations. The same principle then is used to isolate the effect on ozone concentrations of the two main sources of emissions in the greater Athens area: the industrial area around Elefsis and the Athens urban area. Last, the buildup of ozone from one day to another is investigated.
From this study, it comes out that ozone production in the Athens area is mainly a 1-day phenomenon. The increased values of photochemical pollutant (up to 130 ppb at ground level) reached during summertime late afternoons on mountain slopes to the north and northeast of the city are related mainly to the current-day emissions. Nevertheless, the recirculation of old pollutants can have an important effect on ozone concentrations in downtown Athens, the southern part of the peninsula, and over the sea, especially near Aigina Island
Validation of an Urban Surface Exchange Parameterization for Mesoscale Models—1D Case in a Street Canyon
A detailed urban parameterization scheme is used in and above a street canyon. To validate this new scheme, the model is run offline on a vertical column (one-dimensional simulations), using measurements from a 30-m-high tower for upper boundary conditions. Measurements were obtained during the intensive observation period of the Basel Urban Boundary Layer Experiment (BUBBLE). Vertical profiles of meteorological variables are simulated in the street canyon. The validation of the parameterization is made with measurements from the tower in the street canyon and directly above roof height. The results show that the urban parameterization scheme is able to catch most of the typical processes that are induced by an urban surface near the ground. The fit to measured profiles is improved in comparison with a model using the traditional approach for urban parameterization (variation of z0 to take into account the presence of a city)
An optimised method to couple meteorological and photochemical models
Accuracy of photochemical air quality model results depends not only on the accuracy of the meteorological fields supplied to the model, but also the frequency that those fields are updated. Tests in two and three dimension, with and without chemistry, were run to identify errors that can arise due to the frequency that models are linked (or coupled) to time varying meteorological fields. In applications using photochemical models uncoupled from meteorological models, the typical frequency that fields are updated is 1 h. This may lead to some error. When run in a coupled fashion, advecting trace contaminants using the same time step as the meteorological model requires excessive computational time, and does not improve results significantly beyond that found when
using the CFL limit to determine the chemical species advection step
05/18/1993 - Eastern\u27s 1993 All Student Show Winner Laura Brahos.pdf
This paper reports on the stages forming a model evaluation protocol for urban flow and dispersion models proposed within the COST Action 732 on "Quality Assurance and Improvement of Micro-Scale Meteorological Models". It discusses the different components forming model evaluation with emphasis on validation and implementation of the protocol for the test case Mock Urban Setting Test (MUST). The protocol was proposed with building-resolving models in mind, but integral models have also been included. The suggested approach can be used for further micro-scale model evaluation and for the standardisation of their applications
The International Urban Energy Balance Models Comparison Project: First Results from Phase 1
A large number of urban surface energy balance models now exist with different assumptions about the
important features of the surface and exchange processes that need to be incorporated. To date, no com-
parison of these models has been conducted; in contrast, models for natural surfaces have been compared
extensively as part of the Project for Intercomparison of Land-surface Parameterization Schemes. Here, the
methods and first results from an extensive international comparison of 33 models are presented. The aim of
the comparison overall is to understand the complexity required to model energy and water exchanges in
urban areas. The degree of complexity included in the models is outlined and impacts on model performance
are discussed. During the comparison there have been significant developments in the models with resulting
improvements in performance (root-mean-square error falling by up to two-thirds). Evaluation is based on a
dataset containing net all-wave radiation, sensible heat, and latent heat flux observations for an industrial area in
Vancouver, British Columbia, Canada. The aim of the comparison is twofold: to identify those modeling ap-
proaches that minimize the errors in the simulated fluxes of the urban energy balance and to determine the
degree of model complexity required for accurate simulations. There is evidence that some classes of models
perform better for individual fluxes but no model performs best or worst for all fluxes. In general, the simpler
models perform as well as the more complex models based on all statistical measures. Generally the schemes
have best overall capability to model net all-wave radiation and least capability to model latent heat flux
- …