3,520 research outputs found
Machine learning techniques to select Be star candidates. An application in the OGLE-IV Gaia south ecliptic pole field
Statistical pattern recognition methods have provided competitive solutions
for variable star classification at a relatively low computational cost. In
order to perform supervised classification, a set of features is proposed and
used to train an automatic classification system. Quantities related to the
magnitude density of the light curves and their Fourier coefficients have been
chosen as features in previous studies. However, some of these features are not
robust to the presence of outliers and the calculation of Fourier coefficients
is computationally expensive for large data sets. We propose and evaluate the
performance of a new robust set of features using supervised classifiers in
order to look for new Be star candidates in the OGLE-IV Gaia south ecliptic
pole field. We calculated the proposed set of features on six types of variable
stars and on a set of Be star candidates reported in the literature. We
evaluated the performance of these features using classification trees and
random forests along with K-nearest neighbours, support vector machines, and
gradient boosted trees methods. We tuned the classifiers with a 10-fold
cross-validation and grid search. We validated the performance of the best
classifier on a set of OGLE-IV light curves and applied this to find new Be
star candidates. The random forest classifier outperformed the others. By using
the random forest classifier and colour criteria we found 50 Be star candidates
in the direction of the Gaia south ecliptic pole field, four of which have
infrared colours consistent with Herbig Ae/Be stars. Supervised methods are
very useful in order to obtain preliminary samples of variable stars extracted
from large databases. As usual, the stars classified as Be stars candidates
must be checked for the colours and spectroscopic characteristics expected for
them
Laser Floating Zone: General Overview Focusing on the Oxyorthosilicates Growth
This chapter reviews the laser floating zone (LFZ) technique, also known as the laser-heated pedestal growth (LHPG), focusing on the recently produced rare-earth-doped oxyorthosilicate fibers. LFZ has been revealed as a suitable prototyping technique since high-quality crystals can be developed in short time with low consumption of precursor materials in a crucible-free processing that ensures to practically avoid by-products. Moreover, additional advantages are the possibility to treat and melt highly refractory materials together with the easy way for tailoring the final microstructural characteristics and this way the macroscopic physical properties. Thus, refractory rare-earth (RE) doped oxyorthosilicates following the formula RE2SiO5 have been recently produced by the LFZ technique for tuning laser emission parameters. The oxyorthosilicates have high chemical stability and allow incorporation of many rare-earth ions yielding different applications, such as laser host materials, gamma ray detectors or scintillators, environmental barrier coatings (EBCs) and waveguides, among others. Thus, different kinds of oxyorthosilicates were produced by the LFZ technique, and the detailed effects of the main processing parameters on crystalâs characteristics are discussed in this chapter
Derivation of weighting coefficients for multiplexed phase-diffractive elements
We mathematically analyze the phase-only hologram constructed by taking the phase corresponding to the linear combination of two weighted phase functions. We show that this phase-only hologram may be written as a new linear combination for the original phase functions with new weights. Expressions for the new weights are developed to control the performance of the hologram. Also, some nondesired new terms appear and are written in terms of the original phase functions. The particular case of a bifocal lens is analyzed
Analyzing navigation logs in MOOC: A case study
Continued use of various technological devices has massively increased the generation of digital data, which are recorded as an opportunity for research. In the educational case, it is common to analyze data generated in Learning Management Systems which allows better understand the learning process of the participants and make informed decisions for better e-learning processes and situations in which develop. This paper analyzes participantsâ navigation logs in a MOOC hosted on the Coursera platform, for which a visual e-learning analytics process was performed. The results confirm that the videos of experts are an essential educational resource for learning in a MOOC, similarly, the discussion forums are an important resource which are recurrent social spaces in different navigation paths complementing other activities
Preliminary Study of New Electrolytes Based on [MPPyr][TFSI] for Lithium Ion Batteries
Financiado para publicaciĂłn en acceso aberto: Universidade da Coruña/CISUG[Abstract] The application of ionic liquids in lithium ion batteries has increased in recent years in order to find new electrolytes that improve both performance and safety. The gathering of experimental data in order to understand the behaviour of these systems will help us design electrolytes that can be optimized for a specific objective. Data on electrolytes made up of a ternary mixture with an ionic liquid are missing in the literature. In this work, we provide new data on physical properties and refractive indexes for the ternary mixtures 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([MPPyr][TFSI]) + acetonitrile (AN) or Îł butyrolactone (GBL) or dimethyl sulfoxide (DMSO) + lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) with different concentrations of salt, specifically, 10%, 15%, 20%, 30%, 35%. The measured properties were density (Ï), viscosity (η) and ionic conductivity (Îș) in the temperature range of 278.15 to 358.15 K except for the mixtures with acetonitrile whose temperature range was 278.15 K to 328.15 K and the refractive indexes (nD) that were measured at a single temperature of 298.15 K. In general, the addition of salt in the binary mixtures provokes an increase of density and viscosity and therefore a decrease of ionic conductivity. It is worth mentioning that some of the studied systems showed values of ionic conductivity even better than those obtained for electrolyte systems based on carbonate.This work was supported by Ministerio de Economia y Competitividad (MINECO) and FEDER Program through the projects MAT2017â89239-C2â1-P, MAT2017â89239-C2â2-P and D2018â102679-T; Xunta de Galicia. Funding for open access charge: Universidade da Coruña/CISU
Extracting H flux from photometric data in the J-PLUS survey
We present the main steps that will be taken to extract H emission
flux from Javalambre Photometric Local Universe Survey (J-PLUS) photometric
data. For galaxies with , the H+[NII] emission is
covered by the J-PLUS narrow-band filter . We explore three different
methods to extract the H + [NII] flux from J-PLUS photometric data: a
combination of a broad-band and a narrow-band filter ( and ), two
broad-band and a narrow-band one (, and ), and a SED-fitting
based method using 8 photometric points. To test these methodologies, we
simulated J-PLUS data from a sample of 7511 SDSS spectra with measured
H flux. Based on the same sample, we derive two empirical relations to
correct the derived H+[NII] flux from dust extinction and [NII]
contamination. We find that the only unbiased method is the SED fitting based
one. The combination of two filters underestimates the measurements of the
H + [NII] flux by a 28%, while the three filters method by a 9%. We
study the error budget of the SED-fitting based method and find that, in
addition to the photometric error, our measurements have a systematic
uncertainty of a 4.3%. Several sources contribute to this uncertainty:
differences between our measurement procedure and the one used to derive the
spectroscopic values, the use of simple stellar populations as templates, and
the intrinsic errors of the spectra, which were not taken into account. Apart
from that, the empirical corrections for dust extinction and [NII]
contamination add an extra uncertainty of 14%. Given the J-PLUS photometric
system, the best methodology to extract H + [NII] flux is the
SED-fitting based one. Using this method, we are able to recover reliable
H fluxes for thousands of nearby galaxies in a robust and homogeneous
way.Comment: 11 pages, 14 figures. Minor changes to match the published versio
Pseudoepitheliomatous hyperplasia after diode laser oral surgery: an experimen tal study
Background
: To examine the process of epithelial reparation in a surgical wound caused by diode laser.
Material and Methods
:
A
n experimental study with 27 Sprage-Dawley rats was undertaken. The animals were
randomly allocated to two experimental groups, whose individuals underwent glossectomy by means of a diode
laser at different wattages, and a control group treated using a number 15 scalpel blade.
The animals were slaughtered at the 2nd, 7th, and 14th day after glossectomy. The specimens were independently
studied by two pathologists (blinded for the specimensâ group).
Results: At the 7th day, re-epithelisation was slightly faster for the control group (conventional scalpel) (
p
=0.011).
At the 14th day, complete re-epithelization was observed for all groups. The experimental groups displayed a
pseudoepitheliomatous hyperplasia.
Conclusions: It is concluded that, considering the limitations of this kind of experimental studies, early re-epithelisation occurs slightly faster when a conventional scalpel is used for incision, although re-epithelisation is completed in two weeks no matter the instrument used. In addition, pseudoepitheliomatous hyperplasia is a potential
event after oral mucosa surgery with diode laser. Knowledge about this phenomenon (not previously described)
may prevent diagnostic mistakes and inadequate treatment approaches, particularly when dealing with potentially
malignant oral lesions
The influence of summer upwelling at the western boundary of the Cantabrian coast
7 pĂĄginas, 1 tabla, 4 figurasRecent characterizations of atmospheric conditions favorable to upwelling events in the Western Cantabrian Sea have stressed the need to analyze the significance of the orientation of the coast on the phenomenon of upwelling. Surface-wind fields for the northwestern Galician marine area were provided by the QuikSCAT satellite and an SST map was elaborated using the NASA GHRSST satellite data. A cruise was conducted aboard the RV Lura in June 2009 during northern prevailing winds. Data of thermohaline variables, concentration of dissolved oxygen, dissolved inorganic nitrogen, chlorophyll, dissolved and particulate organic carbon and nitrogen and phytoplankton abundances were obtained. When the upwelling developed west of the Cape Ortegal was strong, the Eastern North Atlantic Central Water mixed with coastal water eastward of the Cape and the upwelled seawater reached the westernmost of the Northern Galician Rias, the Ria of Ortigueira. Incoming seawater was poor in nitrate and chlorophyll concentrations when compared to that of the upwelling events in the Western Galician Rias. The phytoplankton assemblages were typical of summer upwelling blooms in the latter Rias but phytoplankton biomass was lower in the Ria of Ortigueira and the species were indicatives of initial (inner ria under continental influence) and advanced (outer ria under upwelling inputs) stages of phytoplankton succession. The observed process arose when the upwelling edge-zone reaches a change of coastal orientation as may also occur in other upwelling regions.This work was
CICYT-FEDER financed (CTM2007-62546-C03/MAR).Peer reviewe
- âŠ