Pulse Ratings and Thermal Characteristics of Power Transistors

Power transistors are used in switching circuits of various types. Their operation in these circuits can be considered as an essentially on-off operation. Designers working with these circuits found that the ratio of the on-time to the off-time is a critical factor in determining the average power that the transistor can dissipate without exceeding its inherent temperature limits

A Miniature Optical Neuronavigation System for CT-Guided Stereotaxy

Background and Objective: Neuronavigation devices have progressed over the past 2 decades, but logistical limitations remain for many stereotactic procedures. We describe our technique and accuracy for a novel miniature optical tracking system which overcomes these limitations. Method: The minioptical tracking system uses a miniature video camera mounted on a rigid cannula to determine cannula location and orientation relative to a patient-attached sticker containing reference markers. A CT scan is used to register these markers to the anatomy and a user-selected target. A computer displays the cannula guidance information to the target. Bench testing was performed on 225 targets in a custom test phantom and additional testing was performed on 20 small targets in an anthropomorphic head phantom to determine the practical accuracy and workflow. Results: The phantom study demonstrated that 3-D navigation accuracy is 1.41 ± 0.53 mm. There was a 100% head phantom study success rate for the 20 small targets. Conclusions: The resulting accuracy data demonstrated good correlation with the CT data, and the clinical simulation workflow indicated its potential usefulness for common neurosurgical applications. Furthermore, this small-footprint tracking technology does not experience the traditional environmentally induced issues or the requirement of pin-based head fixation, allowing for use in the neurointensive care unit and the emergency department. © 2013 S. Karger AG, Basel

Sb2S3 Thin-Film Solar Cells Fabricated from an Antimony Ethyl Xanthate Based Precursor in Air.

The rapidly expanding demand for photovoltaics (PVs) requires stable, quick, and easy to manufacture solar cells based on socioeconomically and ecologically viable earth-abundant resources. Sb2S3 has been a potential candidate for solar PVs and the efficiency of planar Sb2S3 thin-film solar cells has witnessed a reasonable rise from 5.77% in 2014 to 8% in 2022. Herein, the aim is to bring new insight into Sb2S3 solar cell research by investigating how the bulk and surface properties of the Sb2S3 absorber and the current-voltage and deep-level defect characteristics of solar cells based on these films are affected by the ultrasonic spray pyrolysis deposition temperature and the molar ratio of thiourea to SbEX in solution. The properties of the Sb2S3 absorber are characterized by bulk- and surface-sensitive methods. Solar cells are characterized by temperature-dependent current-voltage, external quantum efficiency, and deep-level transient spectroscopy measurements. In this paper, the first thin-film solar cells based on a planar Sb2S3 absorber grown from antimony ethyl xanthate (SbEX) by ultrasonic spray pyrolysis in air are demonstrated. Devices based on the Sb2S3 absorber grown at 200 °C, especially from a solution of thiourea and SbEX in a molar ratio of 4.5, perform the best by virtue of suppressed surface oxidation of Sb2S3, favorable band alignment, Sb-vacancy concentration, a continuous film morphology, and a suitable film thickness of 75 nm, achieving up to 4.1% power conversion efficiency, which is the best efficiency to date for planar Sb2S3 solar cells grown from xanthate-based precursors. Our findings highlight the importance of developing synthesis conditions to achieve the best solar cell device performance for an Sb2S3 absorber layer pertaining to the chosen deposition method, experimental setup, and precursors