276 research outputs found
Feasibility of short term drainage for diagnostic thoracoscopy
Background and Aim. Thoracoscopy is a diagnostic tool superior to other available techniques for the assessment of pleural effusions. There are numerous publications that describe the technique in detail but there is very little published on the optimal time of chest drain removal post procedure. Our aim was to retrospectively study all cases of diagnostic thoracoscopy and to ascertain the time of chest drain removal, length of hospital stay and associated complications. Methods. All patients who underwent thoracoscopy during a 6-year period were identified from a computerised database. Patients who received talc for pleurodesis were excluded as they required longer drainage time. A review of the remaining patients’ charts and radiology was performed to ascertain the predefined outcomes. Results. 124 patients had a diagnostic thoracoscopy. The time to chest drain removal was documented as less than four hours, four to 24 hours, 24 to 48 hours and greater than 48 hours in 66 (53.2%), 29 (23.4%), 12 (9.7%) and 17 (13.7%) of patients respectively. The median length of stay for all patients was one day (interquartile range, 1-4 days). There was a statistically significant difference in overall length of hospital stay between the early (48 hours) chest drain removal groups, p=0.0028. The overall complication rate was 15.9%. There was no statistical difference in complication rates between the two groups. Conclusion. This retrospective series demonstrates that early chest drain removal post diagnostic thoracoscopy is possible and safe. This is likely to confer economic benefits
CX3CR1 Polymorphisms are associated with atopy but not asthma in German children
Chemokines and their receptors are involved in many aspects of immunity. Chemokine CX3CL1, acting via its receptor CX3CR1, regulates monocyte migration and macrophage differentiation as well as T cell-dependent inflammation. Two common, nonsynonymous polymorphisms in CX3CR1 have previously been shown to alter the function of the CX3CL1/CX3CR1 pathway and were suggested to modify the risk for asthma. Using matrix-assisted laser desorption/ionization time-of-flight technology, we genotyped polymorphisms Val249Ile and Thr280Met in a cross-sectional population of German children from Munich (n = 1,159) and Dresden ( n = 1,940). For 249Ile an odds ratio of 0.77 (95% confidence interval 0.63-0.96; p = 0.017) and for 280Met an odds ratio of 0.71 ( 95% confidence interval 0.56-0.89; p = 0.004) were found with atopy in Dresden but not in Munich. Neither polymorphism was associated with asthma. Thus, amino acid changes in CX3CR1 may influence the development of atopy but not asthma in German children. Potentially, other factors such as environmental effects may modify the role of CX3CR1 polymorphisms. Copyright (c) 2007 S. Karger AG, Basel
Antiviral Activity of Reagents in Mouth Rinses against SARS-CoV-2.
The oral cavity, an essential part of the upper aerodigestive tract, is believed to play an important role in the pathogenicity and transmission of SARS-CoV-2. The identification of targeted antiviral mouth rinses to reduce salivary viral load would contribute to reducing the COVID-19 pandemic. While awaiting the results of significant clinical studies, which to date do not exist, the commercial availability of mouth rinses leads us to search among them for reagents that would have specific antiviral properties with respect to SARS-CoV-2. The challenges facing this target were examined for 7 reagents found in commercially available mouth rinses and listed on the ClinicalTrials.gov website: povidone-iodine, chlorhexidine, hydrogen peroxide, cyclodextrin, Citrox, cetylpyridinium chloride, and essential oils. Because SARS-CoV-2 is an enveloped virus, many reagents target the outer lipid membrane. Moreover, some of them can act on the capsid by denaturing proteins. Until now, there has been no scientific evidence to recommend mouth rinses with an anti-SARS-CoV-2 effect to control the viral load in the oral cavity. This critical review indicates that current knowledge of these reagents would likely improve trends in salivary viral load status. This finding is a strong sign to encourage clinical research for which quality protocols are already available in the literature
Hardware in the Loop Testing of an Iodine-Fed Hall Thruster
CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload,1 providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cm cu and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high delta v maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Recently, work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) 2 that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. Iodine stores as a dense solid at very low pressures, making it acceptable as a propellant on a secondary payload. It has exceptionally high Isp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing the potential for systems-level advantages over mid-term high power electric propulsion options. Iodine flow can also be thermally regulated, subliming at relatively low temperature ( less than100 C) to yield I2 vapor at or below 50 torr. At low power, the measured performance of an iodine-fed HET is very similar to that of a state-of-the-art xenon-fed thruster. Just as importantly, the current-voltage discharge characteristics of low power iodine-fed and xenon-fed thrusters are remarkably similar, potentially reducing development and qualifications costs by making it possible to use an already-qualified xenon-HET PPU in an iodine-fed system. Finally, a cold surface can be installed in a vacuum test chamber on which expended iodine propellant can deposit. In addition, the temperature doesn't have to be extremely cold to maintain a low vapor pressure in the vacuum chamber (it is under 10(exp -6) torr at -75 C), making it possible to 'cryopump' the propellant with lower-cost recirculating refrigerant-based systems as opposed to using liquid nitrogen or low temperature gaseous helium cryopanels. In the present paper, we describe testing performed using an iodine-fed 200 W Hall thruster mounted to a thrust stand and operated in conjunction with MSFCs Small Projects Rapid Integration and Test Environment (SPRITE) Portable Hardware In the Loop (PHIL) hardware. This work is performed in support of the iodine satellite (iSAT) project, which aims to fly a 200-W iodine-fed thruster on a 12-U CubeSat. The SPRITE PHIL hardware allows a given vehicle to do a checkout of its avionics algorithm by allowing it to monitor and feed data to simulated sensors and effectors in a digital environment. These data are then used to determine the attitude of the vehicle and a separate computer is used to interpret the data set and visualize it using a 3D graphical interface. The PHIL hardware allows the testing of the vehicles bus by providing 'real' hardware interfaces (in the case of this test a real RS422 bus) and specific components can be modeled to show their interactions with the avionics algorithm (e.g. a thruster model). For the iSAT project the PHIL is used to visualize the operating cycle of the thruster and the subsequent effect this thrusting has on the attitude of the satellite over a given period of time. The test is controlled using software running on an Andrews Space Cortex 160 flight computer. This computer is the current baseline for a full iSAT mission. While the test could be conducted with a lab computer and software, the team chose to exercise the propulsion system with a representative CubeSat-class computer. For purposes of this test, the "flight" software monitored the propulsion and PPU systems, controlled operation of the thruster, and provided thruster state data to the PHIL simulation. Commands to operate the thruster were initiated from an operator's workstation outside the vacuum chamber and passed through the Cortex 160 to exercise portions of the flight avionics. Two custom-designed pieces of electronics hardware have been designed to operate the propellant feed system. One piece of hardware is an auxiliary board that controls a latch valve, proportional flow control valves (PFCVs) and valve heaters as well as measuring pressures, temperatures and PFCV feedback voltage. An onboard FPGA provides a serial link for issuing commands and manages all lower level input-output functions. The other piece of hardware is a power distribution board, which accepts a standard bus voltage input and converts this voltage into all the different current-voltage types required to operate the auxiliary board. These electronics boards are located in the vacuum chamber near the thruster, exposing this hardware to both the vacuum and plasma environments they would encounter during a mission, with these components communicating to the flight computer through an RS-422 interface. The auxiliary board FPGA provides a 28V MOSFET switch circuit with a 20ms pulse to open or close the iodine propellant feed system latch valve. The FPGA provides a pulse width modulation (PWM) signal to a DC/DC boost converter to produce the 12-120V needed for control of the proportional flow control valve. There are eight MOSFET-switched heating circuits in the system. Heaters are 28V and located in the latch valve, PFCV, propellant tank and propellant feed lines. Both the latch valve and PFCV have thermistors built into them for temperature monitoring. There are also seven resistance temperature device (RTD) circuits on the auxiliary board that can be used to measure the propellant tank and feedline temperatures. The signals are conditioned and sent to an analog to digital converter (ADC), which is directly commanded and controlled by the FPGA
Mid-term psychiatric consequences of the COVID-19 pandemic: a 4 months observational study on emergency room admissions for psychiatric evaluation after the (first) lockdown period in Italy
Purpose: The aim of our study is to evaluate the number and the features of admissions to the emergency room (ER) requiring psychiatric consultation, in the period between May 4th and August 31st 2020. Methods: We carried out a retrospective longitudinal observational study examining the 4 months following the initial lockdown imposed during the COVID-19 outbreak (May 4th and August 31st 2020). More specifically, the ER admissions leading to psychiatric referral were reviewed at all seven public hospitals of AUSL Romagna (Emilia Romagna region, Italy). Socio-demographic variables, history of medical comorbidities or psychiatric disorders, reason for ER admission, psychiatric diagnosis at discharge, and actions taken by the psychiatrist were collected. Results: An 11.3% (p = 0.007) increase in psychiatric assessments was observed when compared with the same period of the previous year (2019). A positive personal history of psychiatric disorders (OR:0.68, CI: 0.53–0.87) and assessments leading to no indication for follow-up (OR: 0.22, CI: 0.13–0.39) were significantly less frequent, while there was a significant increase of cases featuring organic comorbidities (OR: 1.24, CI: 1.00–1.52) and suicidal ideation/self-harm/suicide attempt (OR: 1,71, CI: 1.19–2.45) or psychomotor agitation (OR: 1.46, CI: 1.02–2.07) as reason for admission. Conclusions: Our results showed an increase in ER psychiatric consultations compared to the previous year, underlying the increased psychological distress caused by the lockdown
Low-dose oral imatinib in the treatment of systemic sclerosis interstitial lung disease unresponsive to cyclophosphamide: a phase II pilot study.
NTRODUCTION:
Pulmonary involvement represents a major cause of death of systemic sclerosis (SSc) patients. Recent data suggest that tyrosine kinase inhibitors, such as imatinib, may be a therapeutic option for SSc patients. However, preliminary published clinical trials were inconclusive about imatinib efficacy and showed side effects. The purpose of this study was to verify efficacy and tolerability of low-dose imatinib on interstitial lung disease in a cohort of SSc patients unresponsive to cyclophosphamide therapy.
METHODS:
Thirty consecutive SSc patients with active pulmonary involvement, unresponsive to cyclophosphamide, were treated with imatinib 200 mg/day for 6 months followed by a 6-month follow-up. A "good response" was defined as an increase of forced vital capacity (FVC) by more of 15% and/or increase of diffusing capacity of carbon monoxide (DLCO) >15% and PaO2 > 90% of initial value and high-resolution computed tomography (HRCT)-scan pattern unchanged or improved.
RESULTS:
Twenty-six patients completed the study. Three patients died and one patient was lost to follow-up. Four patients (15.32%) had a good response, 7 worsened and 15 had a stabilized lung disease. Overall, 19 (73.07%) patients had an improved or stabilized lung disease. After a 6-month follow-up, 12 (54.5%) of the 22 patients showed an improved or stabilized lung disease.
CONCLUSIONS:
Lung function was stabilized in a large proportion of patients unresponsive to cyclophosphamide therapy and a beneficial outcome emerged from the analysis of HRCT lung scans. There was no significant improvement of skin involvement, and the low dose was well tolerated. These data provide useful suggestions to design future randomized clinical trials for SSc therapeutics
S.13.1 Safety and efficacy of rituximab in SSc: an analysis from the European Scleroderma Trial and Research Group
Objectives. Objective of this multicentre, observational study was to assess effects and safety of rituximab (RTX) using the European Scleroderma Trial and Research Group (EUSTAR) cohort. Methods. EUSTAR centres were asked to provide specific data about SSc patients treated with RTX. Primary endpoints were predefined for different disease manifestations and compared between baseline and follow-up. Normally distributed data, analysed by paired t-test, are shown as mean (s.d.), and non-parametric data, analysed by Wilcoxon matched paired signed-rank test, are shown as median and interquartile range. Results. Data on 72 SSc patients treated with RTX were captured from 27 EUSTAR centres (51 females/21 males, 52 diffuse/19 limited, age 51 (44-60) years, disease duration 6 (3-10) years, 47 anti-Scl-70 positive). The most frequent RTX application scheme was 1000 mg × 2 within 2 weeks (57/72 patients). Co-treatment with other immunosuppressive drugs was reported in 28 patients. The modified Rodnan skin score (mRSS) significantly decreased vs baseline at 7 (5-9) months follow-up (n = 47, 18.2 + 10.9 vs 14.5 + 9.9, P = 0.0002). This was true for both patients with later disease stages and also for patients with earlier, extended skin fibrosis (dSSc with mRSS >16 at baseline, n = 26; 26.5 + 6.8 vs 20.4 + 8.9, P < 0.0001, reduction by 29.9%). S-HAQ was unchanged, but the European SSc activity score improved after rituximab treatment [n = 10; 3.7 (2.6-6.4) vs 1.7 (0.9-2.5), P = 0.01]. RTX had no effects on lung fibrosis (FVC, DLCO, TLC, HRCT score) in n = 11 patients with evidence for SSc-ILD. In SSc-polyarthritis patients, the DAS-28 declined at 6 months follow-up without reaching statistical significance [n = 8; 4.8 (2.5-7.5) vs 3.7 (2.6-6.6); p = 0.3]. Of 8, 5patients were RF and/or anti-CCP antibody positive. Similar results were obtained for secondary outcome measures (tender and swollen joint count, VAS, CRP, ESR). Additional positive effects of RTX were seen on SSc-related myopathy (CK levels, 273 + 177 vs 184 + 139; n = 12, P = 0.03) and on digital ulcers [total number per patient 1 (1-3) vs 0 (0-1); n = 23; P = 0.0086]. During RTX treatment 14 patients had infections, 3 serum sickness, 2 allergic reactions and 1 lung fibrosis aggravation, 29 fatigue and 9 nausea. Four patients died, one possibly related to RTX treatment (pneumonia and cardiac failure 1.5 months after RTX infusion). Conclusion. This large EUSTAR cohort study points at positive effects of RTX in particular on skin fibrosis, and suggests randomized controlled trial in SSc patient
Low-dose oral imatinib in the treatment of systemic sclerosis interstitial lung disease unresponsive to cyclophosphamide: a phase II pilot study
Introduction: Pulmonary involvement represents a major cause of death of systemic sclerosis (SSc) patients. Recent data suggest that tyrosine kinase inhibitors, such as imatinib, may be a therapeutic option for SSc patients. However, preliminary published clinical trials were inconclusive about imatinib efficacy and showed side effects. The purpose of this study was to verify efficacy and tolerability of low-dose imatinib on interstitial lung disease in a cohort of SSc patients unresponsive to cyclophosphamide therapy.Methods: Thirty consecutive SSc patients with active pulmonary involvement, unresponsive to cyclophosphamide, were treated with imatinib 200 mg/day for 6 months followed by a 6-month follow-up. A "good response" was defined as an increase of forced vital capacity (FVC) by more of 15% and/or increase of diffusing capacity of carbon monoxide (DLCO) > 15% and PaO2 > 90% of initial value and high-resolution computed tomography (HRCT)-scan pattern unchanged or improved.Results: Twenty-six patients completed the study. Three patients died and one patient was lost to follow-up. Four patients (15.32%) had a good response, 7 worsened and 15 had a stabilized lung disease. Overall, 19 (73.07%) patients had an improved or stabilized lung disease. After a 6-month follow-up, 12 (54.5%) of the 22 patients showed an improved or stabilized lung disease.Conclusions: Lung function was stabilized in a large proportion of patients unresponsive to cyclophosphamide therapy and a beneficial outcome emerged from the analysis of HRCT lung scans. There was no significant improvement of skin involvement, and the low dose was well tolerated. These data provide useful suggestions to design future randomized clinical trials for SSc therapeutics
Management of mixed cryoglobulinemia with rituximab: evidence and consensus-based recommendations from the Italian Study Group of Cryoglobulinemia (GISC)
Cryoglobulinemic vasculitis (CV) or mixed cryoglobulinemic syndrome (MCS) is a systemic small-vessel vasculitis characterized by the proliferation of B-cell clones producing pathogenic immune complexes, called cryoglobulins. It is often secondary to hepatitis C virus (HCV), autoimmune diseases, and hematological malignancies. CV usually has a mild benign clinical course, but severe organ damage and life-threatening manifestations can occur. Recently, evidence in favor of rituximab (RTX), an anti-CD 20 monoclonal antibody, is emerging in CV: nevertheless, questions upon the safety of this therapeutic approach, especially in HCV patients, are still being issued and universally accepted recommendations that can help physicians in MCS treatment are lacking. A Consensus Committee provided a prioritized list of research questions to perform a systematic literature review (SLR). A search was made in Medline, Embase, and Cochrane library, updated to August 2021. Of 1227 article abstracts evaluated, 27 studies were included in the SLR, of which one SLR, 4 RCTs, and 22 observational studies. Seventeen recommendations for the management of mixed cryoglobulinemia with rituximab from the Italian Study Group of Cryoglobulinemia (GISC) were developed to give a valuable tool to the physician approaching RTX treatment in CV
Preliminary classification criteria for the cryoglobulinaemic vasculitis
To develop preliminary classification criteria for the cryoglobulinaemic syndrome or cryoglobulinaemic vasculitis (CV)
- …