74 research outputs found
Calculation of 1/m^3 terms in the total semileptonic width of D mesons.
We calculate the 1/ corrections in the inclusive semileptonic widths
of mesons. We show that these are due to the novel penguin type operators
that appear at this level in the transition operator. Taking into account the
nonperturbative corrections leads to the predicted value of the semileptonic
width significantly lower than the experimental value. The worsen the
situation or at the very least, within uncertainty, give small contribution. We
indicate possible ways out. It seems most probable that violations of duality
are noticeable in the energy range characteristic to the inclusive decays in
the charm family. Theoretically these deviations are related to divergence of
the high-order terms in the power expansion in the inverse heavy quark mass.Comment: Final version accepted for publication in Physical Review D (19
pages, 5 figures appended as two PS files at the end of the LATEX file
Results of final focus test beam
International audienceThe beam experiments of Final Focus Test Beam (FFTB) started in September 1993 at SLAC, and have produced a 1.7 μm×75 nm spot of 46 GeV electron beam. A number of new techniques involving two nanometer spot-size monitors have been developed. Several beam diagnostic/tuning schemes are applied to achieve and maintain the small spot. This experiment opens the way toward the nanometer world for future linear collider
Observation of charmless hadronic B decays
Four candidates for charmless hadronic B decay are observed in a data sample of four million hadronic Z decays recorded by the ALEPH detector at LEP. The probability that these events come from background sources is estimated to be less than 10(-6). The average branching of weakly decaying B hadrons (a mixture of B-d(0), B-s(0) and Lambda(b) weighted by their production The average branching ratio of weakly decaying B hadrons (a mixture of B-d(0) cross sections and lifetimes, here denoted B) into two long-lived charged hadrons (pions, kaons or protons) is measured to be Br(B-->h(+)h(-))=(1.7(-0.7)(+1.0)+/-0.2)x10(-5). The relative branching fraction Br(B-d(s)(0)-->pi(+)pi(-)(K-))/Br(B-d(s)(0)-->h(+)h(-)) is measured to be 1.0(-0.3-0.1)(+0.0+0.0). In addition, branching ratio upper limits are obtained for a variety of exclusive charmless hadronic two-body decays of B hadrons
Four-fermion production in collisions at centre-of-mass energies of 130 and 136 GeV
Four-fermion events have been selected in a data sample of 5.8 pb−1 collected with the aleph detector at centre-of-mass energies of 130 and 136 GeV. The final states , ℓ+ℓ−ℓ+ℓ−, , and have been examined. Five events are observed in the data, in agreement with the Standard Model predictions of 6.67±0.38 events from four-fermion processes and 0.14−0.05+0.19 from background processes
The Compact Linear Collider (CLIC) - 2018 Summary Report
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years
Recommended from our members
Alignment of the SLC Final Focus system using beam orbits
Beam based alignment is being routinely applied in the SLC Final Focus and has proved to be a very useful tool for determining the quality of the zeroth order orbit as defined by various beam line elements. Given the stringent requirement on the beam quality at the interaction point, a well aligned beam line is essential in that it minimizes the confusion which would otherwise arise in the higher order optics, the demand called on the correctors which also serve as optical knobs, and the problem associated with the background radiation. In the SLC final focus we have been relying on an interplay between the field survey and the orbit analysis to achieve this purpose. Mechanical alignment generally provides coordinate information of various beam line elements and offset values inferred from these data and the model of the beam line. Beam based alignment is done mainly by recording the beam orbit under controlled experiment where optical elements or orbit conditions are varied. Due to the complexity of the beamline layout and special power supply configuration in the SLC Final Focus, the latter method is useful only when coupled with off-line analysis which disentangles the data taken at each measurement. In this report we describe the techniques used and the underlying principle, the procedure as applied in the Final Focus, the outcome of this exercise and some problems encountered. 6 figs
Fit of the unitarity triangle parameters
This report contains the results of the Workshop on the CKM Unitarity Triangle, held at CERN on 13-16 February 2002 to study the determination of the CKM matrix from the available data of K, D, and B physics. This is a coherent document with chapters covering the determination of CKM elements from tree level decays and K and B meson mixing and the global fits of the unitarity triangle parameters. The impact of future measurements is also discussed
- …