Simulating disease transmission dynamics at a multi-scale level

We present a model of the global spread of a generic human infectious disease using a Monte Carlo micro-simulation with large-scale parallel-processing. This prototype has been constructed and tested on a model of the entire population of the British Isles. Typical results are presented. A microsimulation of this order of magnitude of population simulation has not been previously attained. Further, an efficiency assessment of processor usage indicates that extension to the global scale is feasible. We conclude that the flexible approach outlined provides the framework for a virtual laboratory capable of supporting public health policy making at a variety of spatial scales.high-performance computing; global modelling; disease transmission

Electric dipole moments and the search for new physics

Static electric dipole moments of nondegenerate systems probe mass scales for physics beyond the Standard Model well beyond those reached directly at high energy colliders. Discrimination between different physics models, however, requires complementary searches in atomic-molecular-and-optical, nuclear and particle physics. In this report, we discuss the current status and prospects in the near future for a compelling suite of such experiments, along with developments needed in the encompassing theoretical framework.Comment: Contribution to Snowmass 2021; updated with community edits and endorsement

AEDGE: Atomic Experiment for Dark Matter and Gravity Exploration in Space

Abstract: We propose in this White Paper a concept for a space experiment using cold atoms to search for ultra-light dark matter, and to detect gravitational waves in the frequency range between the most sensitive ranges of LISA and the terrestrial LIGO/Virgo/KAGRA/INDIGO experiments. This interdisciplinary experiment, called Atomic Experiment for Dark Matter and Gravity Exploration (AEDGE), will also complement other planned searches for dark matter, and exploit synergies with other gravitational wave detectors. We give examples of the extended range of sensitivity to ultra-light dark matter offered by AEDGE, and how its gravitational-wave measurements could explore the assembly of super-massive black holes, first-order phase transitions in the early universe and cosmic strings. AEDGE will be based upon technologies now being developed for terrestrial experiments using cold atoms, and will benefit from the space experience obtained with, e.g., LISA and cold atom experiments in microgravity. KCL-PH-TH/2019-65, CERN-TH-2019-12

The HEV Ventilator: at the interface between particle physics and biomedical engineering

A high-quality, low-cost ventilator, dubbed HEV, has been developed by the particle physics community working together with biomedical engineers and physicians around the world. The HEV design is suitable for use both in and out of hospital intensive care units, provides a variety of modes and is capable of supporting spontaneous breathing and supplying oxygen-enriched air. An external air supply can be combined with the unit for use in situations where compressed air is not readily available. HEV supports remote training and post market surveillance via a Web interface and data logging to complement standard touch screen operation, making it suitable for a wide range of geographical deployment. The HEV design places emphasis on the ventilation performance, especially the quality and accuracy of the pressure curves, reactivity of the trigger, measurement of delivered volume and control of oxygen mixing, delivering a global performance which will be applicable to ventilator needs beyond the COVID-19 pandemic. This article describes the conceptual design and presents the prototype units together with a performance evaluation.ISSN:2054-570

Phase I Upgrade of the Readout System of the Vertex Detector at the LHCb Experiment

This article describes the high-speed system designed to meet the challenging requirements for the readout of the new pixel VErtex LOcator (VELO) of the upgraded LHCb experiment. All elements of the electronics readout chain will be renewed to cope with the requirement of ~40-MHz full-event readout rate. The pixel sensors will be equipped with VeloPix ASICs and placed at ~5 mm from the Large Hadron Collider (LHC) beams in a secondary vacuum tank in an extremely high and nonhomogeneous radiation environment. The front-end (FE) ASICs with the highest occupancy will have to cope with pixel-hit rates above ~900 Mhits/s using up to four 5.13-Gb/s data readout links. Each module comprises six VeloPix ASICs, wire-bonded to two FE hybrid boards, while a third hybrid will employ a GBTx ASIC as the control interface. High-speed data will reach the wall of the vacuum chamber through low-mass flexible copper tapes. A custom board routes the signals outside the vacuum tank. On the air side, an optical and power board converts the electrical high-speed signals into optical signals for transmission from the underground cavern to the off-detector electronics that process data and send them to a farm of computers for further analysis. Several tests allowing the validation of the system are described here with special emphasis on a test with proton beams that confirms the correct operation of the whole readout hardware

Readout firmware of the Vertex Locator for LHCb Run 3 and beyond

The new LHCb Vertex Locator (VELO) for LHCb, comprising a new pixel detector and readout electronics, will be installed in 2021 for data taking in Run 3 at the LHC. The electronics centers around the "VeloPix" ASIC at the front-end operating in a trigger-less readout at 40MHz. A custom serializer, called gigabit wireline transmitter (GWT), and associated custom protocol have been designed for the VeloPix. The GWT data are sent from the serializers of the VeloPix at a line rate of 5.12 Gb/s, reaching a total data rate of 2-3 Tb/s for the full VELO detector. Data are sent over 300-m optic-fiber links to the control and readout electronics cards for deserialization and processing in Intel Arria 10 FPGAs. Because of the VeloPix trigger-less design, latency variances up to 12 mu s can occur between adjacent datagrams. It is therefore essential to buffer and synchronize the data in firmware prior to onward propagation or suffer a huge CPU-processing penalty. This article will describe the architecture of the readout firmware in detail with focus given to the resynchronization mechanism and techniques for cauterization. Issues found during readout commissioning, and scaling resource utilization, along with the their solutions, will be illustrated. The latest results of the firmware data-processing chain can be presented as well as the verification procedures employed in simulation. Challenges for the next generation of the detector will also be presented with ideas for a readout processing solution.The new LHCb Vertex Locator (VELO) for LHCb, comprising a new pixel detector and readout electronics, will be installed in 2021 for data taking in Run 3 at the LHC. The electronics centers around the 'VeloPix' ASIC at the front-end operating in a trigger-less readout at 40MHz. A custom serializer, called gigabit wireline transmitter (GWT), and associated custom protocol have been designed for the VeloPix. The GWT data are sent from the serializers of the VeloPix at a line rate of 5.12 Gb/s, reaching a total data rate of 2-3 Tb/s for the full VELO detector. Data are sent over 300-m optic-fiber links to the control and readout electronics cards for deserialization and processing in Intel Arria 10 FPGAs. Because of the VeloPix trigger-less design, latency variances up to 12 $\mu \text{s}$ can occur between adjacent datagrams. It is therefore essential to buffer and synchronize the data in firmware prior to onward propagation or suffer a huge CPU-processing penalty. This article will describe the architecture of the readout firmware in detail with focus given to the resynchronization mechanism and techniques for cauterization. Issues found during readout commissioning, and scaling resource utilization, along with the their solutions, will be illustrated. The latest results of the firmware data-processing chain can be presented as well as the verification procedures employed in simulation. Challenges for the next generation of the detector will also be presented with ideas for a readout processing solution

The HEV Ventilator: at the interface between particle physics and biomedical engineering.

A high-quality, low-cost ventilator, dubbed HEV, has been developed by the particle physics community working together with biomedical engineers and physicians around the world. The HEV design is suitable for use both in and out of hospital intensive care units, provides a variety of modes and is capable of supporting spontaneous breathing and supplying oxygen-enriched air. An external air supply can be combined with the unit for use in situations where compressed air is not readily available. HEV supports remote training and post market surveillance via a Web interface and data logging to complement standard touch screen operation, making it suitable for a wide range of geographical deployment. The HEV design places emphasis on the ventilation performance, especially the quality and accuracy of the pressure curves, reactivity of the trigger, measurement of delivered volume and control of oxygen mixing, delivering a global performance which will be applicable to ventilator needs beyond the COVID-19 pandemic. This article describes the conceptual design and presents the prototype units together with a performance evaluation