Crystallized InBiS3 thin films with enhanced optoelectronic properties

In this paper, a one-step thermal evaporation approach was used for fabrication of indium bismuth sulphide thin films, and the synergetic effects of co-evaporation of two sources (indium granules and Bi2S3 powders) were investigated using different characterization techniques. X-ray diffraction (XRD) analysis confirmed the crystalline orthorhombic structure for the postannealed samples. Surface roughness and crystal size of the obtained film samples were increased with increasing annealing temperatures. Analysis using X-ray photoelectron spectroscopy showed the formation of the InBiS3 structure for the obtained films, which is also confirmed by the XRD results. The optical absorption coefficient value of the annealed samples was found to be in the order of 10⁵cm-1 in the visible region of the solar spectrum. The optical band gap energy and electrical resistivity of the fabricated samples were observed to decrease (from 2.2 to 1.3 eV, and from 0.3 to 0.01 Ω-cm, respectively) with increasing annealing temperatures (from 200 to 350°C), indicating the suitability of the prepared InBiS3 thin films for solar cell applications

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Solid-State Limited Nucleation of NiSi/SiC Core-Shell Nanowires by Hot-Wire Chemical Vapor Deposition

This work demonstrated a growth of well-aligned NiSi/SiC core-shell nanowires by a one-step process of hot-wire chemical vapor deposition on Ni-coated crystal silicon substrates at different thicknesses. The NiSi nanoparticles (60 to 207 nm) acted as nano-templates to initially inducing the growth of these core-shell nanowires. These core-shell nanowires were structured by single crystalline NiSi and amorphous SiC as the cores and shells of the nanowires, respectively. It is proposed that the precipitation of the NiSi/SiC are followed according to the nucleation limited silicide reaction and the surface-migration respectively for these core-shell nanowires. The electrical performance of the grown NiSi/SiC core-shell nanowires was characterized by the conducting AFM and it is found that the measured conductivities of the nanowires were higher than the reported works that might be enhanced by SiC shell layer on NiSi nanowires. The high conductivity of NiSi/SiC core-shell nanowires could potentially improve the electrical performance of the nanowires-based devices for harsh environment applications such as field effect transistors, field emitters, space sensors, and electrochemical devices

Transmission of Tuberculosis and Reproduction Number Using Lyapunov Function of SIR Model

This paper studies the mechanism of transmission of Tuberculosis (TB) caused by the mycobacterium tuberculosis bacteria. TB is an airborne disease that endangering human population globally. Mathematical modelling of tuberculosis was developed using the Susceptible-Infected-Recovered (SIR) model in this analysis. The model generated by the four-dimensional, nonlinear dynamic system is reduced to three dimensions, with some assumptions. Then, the model will be analyzed by creating a mathematical theorem that will prove the existence of a TB event, the disease-free equilibrium phase, and the TB endemic disease stage. By using the Lyapunov function method, the three theorems can be proved. The basic reproduction number R0 also can be obtained from the model. If the basic reproduction number R0 ≤ 1, then the disease-free equilibrium is global asymptotically stable and if R0 > 1, then the endemic equilibrium is asymptotically stable globally. Carrying out a simulation using data in a selected region, the result of the model successfully describes and forecast the number of TB cases and it may also be used for assessing the TB disease status

In vitro larvicidal effects of ethanolic extract of Curcuma longa Linn. on Haemonchus larval stage

Aim: Gastrointestinal helminthosis is a global problem in small ruminant production. Most parasites have developed resistance to commonly available anthelminthic compounds, and there is currently an increasing need for new compounds with more efficacies. This study evaluated the in vitro effects of ethanolic extract of Curcuma longa (EECL) as a biological nematicide against third stage Haemonchus larvae (L3) isolated from sheep. Materials and Methods: Haemonchus L3 were cultured and harvested from the feces of naturally infected sheep. EECL was prepared and three concentrations; 50, 100, and 200 mg/mL were tested for their efficacies on Haemonchus L3. Levamisole at concentration 1.5 and 3 mg/mL were used as positive controls. Results: EECL showed anthelmintic activity in a dose-dependent manner with 78% worm mortality within 24 h of exposure at the highest dose rate of 200 mg/mL. There was a 100% worm mortality rate after 2 h of levamisole (3 mg/mL) admisntration. However, there was a comparable larvicidal effect between when levamisole (1.5 mg/mL) and EECL (200 mg) were administered. Conclusion: The study shows that EECL does exhibit good anthelmintic properties at 200 mg/mL which is comparable with levamisole at 1.5 mg/mL