The BLAST Survey of the Vela Molecular Cloud: Dynamical Properties of the Dense Cores in Vela-D

The Vela-D region, according to the nomenclature given by Murphy & May (1991), of the star forming complex known as the Vela Molecular Ridge (VMR), has been recently analyzed in details by Olmi et al. (2009), who studied the physical properties of 141 pre- and proto-stellar cold dust cores, detected by the ``Balloon-borne Large-Aperture Submillimeter Telescope'' (BLAST) during a much larger (55 sq. degree) Galactic Plane survey encompassing the whole VMR. This survey's primary goal was to identify the coldest, dense dust cores possibly associated with the earliest phases of star formation. In this work, the dynamical state of the Vela-D cores is analyzed. Comparison to dynamical masses of a sub-sample of the Vela-D cores estimated from the 13CO survey of Elia et al. (2007), is complicated by the fact that the 13CO linewidths are likely to trace the lower density intercore material, in addition to the dense gas associated with the compact cores observed by BLAST. In fact, the total internal pressure of these cores, if estimated using the 13CO linewidths, appears to be higher than the cloud ambient pressure. If this were the case, then self-gravity and surface pressure would be insufficient to bind these cores and an additional source of external confinement (e.g., magnetic field pressure) would be required. However, if one attempts to scale down the 13CO linewidths, according to the observations of high-density tracers in a small sample of sources, then most proto-stellar cores would result effectively gravitationally bound.Comment: This paper has 12 pages and 6 figures. Accepted for publication by the Astrophysical Journal on July 19, 201

The impact of resources on decision making

Decision making is a significant activity within industry and although much attention has been paid to the manner in which goals impact on how decision making is executed, there has been less focus on the impact decision making resources can have. This article describes an experiment that sought to provide greater insight into the impact that resources can have on how decision making is executed. Investigated variables included the experience levels of decision makers and the quality and availability of information resources. The experiment provided insights into the variety of impacts that resources can have upon decision making, manifested through the evolution of the approaches, methods, and processes used within it. The findings illustrated that there could be an impact on the decision-making process but not on the method or approach, the method and process but not the approach, or the approach, method, and process. In addition, resources were observed to have multiple impacts, which can emerge in different timescales. Given these findings, research is suggested into the development of resource-impact models that would describe the relationships existing between the decision-making activity and resources, together with the development of techniques for reasoning using these models. This would enhance the development of systems that could offer improved levels of decision support through managing the impact of resources on decision making

Comportamiento mecánico en función de la temperatura de aleaciones wolfranio-vanadio

Libro de proceedings de: XI Congreso Nacional de Materiales, Zaragoza, 23 junio 2010En esta investigación se evalúa el comportamiento mecánico del wolframio puro y de dos de sus aleaciones con contenidos de 2% y 4% de vanadio, fabricadas mediante prensado isostático en caliente (HIP). La caracterización mecánica se ha realizado mediante ensayos de flexión en tres puntos en atmósfera oxidante a distintas temperaturas comprendidas entre temperatura ambiente y 1000 ºC. Adicionalmente, se han realizado ensayos en inmersión en nitrógeno líquido para los de -197 ºC. Estos últimos valores pueden servir para una determinación más precisa de la temperatura la transición dúctil-frágil en éstos materiales, y de su posible comportamiento plástico o frágil a temperatura ambiente. Mediante estos ensayos ha sido posible obtener la tenacidad de fractura, la resistencia mecánica, el límite elástico y el módulo de elasticidad en función de la temperatura. Así mismo, se ha determinado la densidad y la dureza Vickers para dos cargas distintas, lo que permitido determinar la influencia de este parámetro en la medida realizada. Adicionalmente, se han examinado mediante microscopia electrónica de barrido las superficies de fractura. De esta forma ha sido posible determinar el modo de rotura y analizar la relación de las propiedades mecánicas macroscópicas con los micromecanismos de fallo involucrados.Este trabajo ha sido financiado por EFDA/CIEMAT WP08-09-MAT-WWALLOY, Ministerio de Ciencia e Innovación, MAT2007-29278-E, BIA2004-04835, y MAT2009- 13979-C03-02, y Comunidad de Madrid, SS2009/MAT-1585 y S2009/ENE-1679Publicad

Molecular stabilization of chemically exfoliated bare MnPS3 layers

Transition metal chalcogenophosphates of general formula MPX3 have attracted recent interest in the field of 2D materials due to the possibility of tuning their properties upon reaching the 2D limit. Several works address this challenge by dry mechanical exfoliation. However, only a few of them use a scalable approach. In this work, we apply a general chemical protocol to exfoliate MnPS3. The method employs in the first step chemical intercalation and liquid phase exfoliation and in the second step the addition of molecules used as capping agents on the inorganic layers. Therefore, molecules of different nature prompt the quality of the exfoliated material and its stabilization in an aqueous solution, opening the possibility of using these functionalized layers in several fields. Here we illustrate this possibility in electrochemistry. Thus, we show that when polyethylenimine is used as the capping agent, it is possible to reach a compromise between the stability of high quality MnPS3 flakes in aqueous suspension and their optimum performance as an electrocatalytic system for HER activity

The black hole population in low-mass galaxies in large-scale cosmological simulations

Recent systematic searches for massive black holes (BHs) in local dwarf galaxies led to the discovery of a population of faint Active Galactic Nuclei (AGN). We investigate the agreement of the BH and AGN populations in the Illustris, TNG, Horizon-AGN, EAGLE, and SIMBA simulations with current observational constraints in low-mass galaxies. We find that some of these simulations produce BHs that are too massive, and that the BH occupation fraction at z=0 is not inherited from the simulation seeding modeling. The ability of BHs and their host galaxies to power an AGN depends on BH and galaxy subgrid modeling. The fraction of AGN in low-mass galaxies is not used to calibrate the simulations, and thus can be used to differentiate galaxy formation models. AGN fractions at z=0 span two orders of magnitude at fixed galaxy stellar mass in simulations, similarly to observational constraints, but uncertainties and degeneracies affect both observations and simulations. The agreement is difficult to interpret due to differences in the masses of simulated and observed BHs, BH occupation fraction affected by numerical choices, and an unknown fraction of obscured AGN. Our work advocates for more thorough comparisons with observations to improve the modeling of cosmological simulations, and our understanding of BH and galaxy physics in the low-mass regime. The mass of BHs, their ability to efficiently accrete gas, and the AGN fraction in low-mass galaxies have important implications for the build-up of the entire BH and galaxy populations with time.Comment: Accepted in MNRAS, 21 pages, 11 figures, 1 tabl

Retrospective cohort analysis of Spanish national trends of coronary artery bypass grafting and percutaneous coronary intervention from 1998 to 2017

Introduction Spain is one of the countries with the lowest rates of revascularisation and highest ratio of percutaneous coronary intervention (PCI) to coronary artery bypass grafting (CABG). Objectives To investigate the changes and trends in the two revascularisation procedures between 1998 and 2017 in Spain. Design Retrospective cohort study. Analysis of in-hospital outcomes. Setting Minimum basic data set from the Spanish National Department of Health: mandatory database collecting information of patients who are attended in the Spanish public National Health System. Participants 603 976 patients who underwent isolated CABG or PCI in the Spanish National Health System. The study period was divided in four 5-year intervals. Patients with acute myocardial infarction on admission were excluded. Primary and secondary outcomes We investigated the volume of procedures nationwide, the changes of the risk profile of patients and in-hospital mortality of both techniques. Results We observed a 2.2-fold increase in the rate of any type of myocardial revascularisation per million inhabitants-year: 357 (1998) to 776 (2017). 93 682 (15.5%) had a coronary surgery. PCI to CABG ratio rose from 2.2 (1998-2002) to 8.1 (2013-2017). Charlson's index increased by 0.8 for CABG and 1 for PCI. The median annual volume of PCI/hospital augmented from 136 to 232, while the volume of CABG was reduced from 137 to 74. In the two decades, we detected a significant reduction of CABG in-hospital mortality (6.5% vs 2.6%, p<0.001) and a small increase in PCI (1.2% vs 1.5%, p<0.001). Risk adjusted mortality rate was reduced for both CABG (1.51 vs 0.48, p<0.001), and PCI (1.42 vs 1.05, p<0.001). Conclusion We detected a significant increase in the volume of revascularisations (particularly PCI) in Spain. Risk-adjusted in-hospital mortality was significantly reduce

Neuromuscular adaptations after 12 weeks of light- vs. heavy-load power-oriented resistance training in older adults

This study aimed to determine the specific adaptations provoked by power oriented resistance training using light (LL-PT, 40% 1-RM) vs. heavy (HL-PT, 80% 1-RM) loads in older adults. Using a randomized within-subject study design, 45 older adults (>65 years) completed an 8-week control period (CTR) followed by 12 weeks of unilateral LL-PT vs. HL-PT on a leg press. The 1-RM, theoretical force at zero velocity (F0), maximal unloaded velocity (V0), and maximal muscle power (Pmax) were determined through a force-velocity relationship test. Isometrically, the rate of force development (RFD) and the corresponding muscle excitation of the knee extensor muscles were assessed. In addition, muscle cross-sectional area (CSA) and architecture of two quadriceps muscles were determined. Changes after CTR, LL-PT and HL-PT were compared using linear mixed models. HL PT provoked greater improvements in 1-RM and F0 (effect size (ES) = 0.55‒0.68; p < 0.001) than those observed after LL-PT (ES = 0.27−0.47; p ≤ 0.001) (post hoc treatment effect, p ≤ 0.057). By contrast, ES of changes in V0 was greater in LL-PT compared to HL-PT (ES = 0.71, p < 0.001 vs. ES = 0.39, p < 0.001), but this differ ence was not statistically significant. Both power training interventions elicited a moderate increase in Pmax (ES = 0.65‒0.69, p < 0.001). Only LL-PT improved early RFD (ie, ≤100 ms) and muscle excitation (ES = 0.36‒0.60, p < 0.05). Increased CSA were noted after both power training programs (ES = 0.13‒0.35, p < 0.035), whereas pennation angle increased only after HL-PT (ES = 0.37, p = 0.004). In conclusion, HL-PT seems to be more effective in improving the capability to gen erate large forces, whereas LL-PT appears to trigger greater gains in movement velocity in older adults. However, both interventions promoted similar increases in muscle power as well as muscle hypertrophy

C(sp3)-C(sp3) bond formation via electrochemical alkoxylation and subsequent Lewis acid promoted reactions

A two-step transition metal-free methodology for the C(sp3)−C(sp3) functionalisation of saturated N-heterocyclic systems is disclosed. First, aminal derivatives are generated through the anodic oxidation of readily accessible carboxylic acids. Then, in the presence of BF3 ⋅ OEt2, iminium ions are unmasked and rapidly alkylated by organozinc reagents under flow conditions. Secondary, tertiary and quaternary carbon centers have been successfully assembled using this methodology. Such an approach is especially relevant to drug discovery since it increases C(sp3)-functionalities rapidly within a molecular framework. As proof of concept, our methodology was applied to derivatization of peptides and an API

Nonstandard work arrangements and configurations of firm and societal systems

In this study, we proposed and empirically confirmed that the use of nonstandard working arrangements (NSWAs) varies according to firm system and societal cluster. Utilizing the configurational, institutional and cultural perspectives, we explored antecedents to the use of four NSWAs across firms in six countries, expanding the scope of variables examined in relation to NSWAs and capturing context as a way of broadening the theory base on the subject. We found a tendency toward greater use of NSWAs among firm systems that foster internal socialization and career advancement over time as well as national contexts that promote employment protection and/or Institutional Collectivism. Finally, we found national context to be a significant determinant of firm system, reinforcing the importance of aligning national with organizational-level antecedents to the study of NSWAs. © 2015 Taylor & Francis