Measuring Public Value Through Local E-Government

In response to the fulfillment of public expectations and the shortcomings of new public management, one alternative approach that has received recent attention is the concept of public value. The use of information and communication technologies (ICTs) has provided an affordance for the development of e-government profiles that principally aim to create public value. As evaluative research, this project contributes to the quantitative development of the public value construct by establishing and assessing relationships between ICT and public value frameworks. Through the use of common website metrics and other previously used dichotomous indicators, the levels of digital public value are assessed under the key themes of efficiency; service delivery quality; trust and legitimacy; and outcome achievement offering a quantitative response to the research question of [How] should Ontario local governments leverage website utility to sustain digital public value in the post COVID era? Results from this study indicate that the themes of service delivery quality and trust and legitimacy account for nearly two-thirds of digital public value creation, suggesting that the dimensions of citizen satisfaction, citizen engagement, convenience, accessibility, trust, and transparency should be primary considerations for local governments. This study also shows that the efficiency theme provides the largest potential for improvement that local governments could consider to enhance their contribution toward digital public value

Beta asymmetry parameter in the decay of 114In

The beta asymmetry parameter A for the pure Gamow-Teller decay of 114In is reported. The low temperature nuclear orientation method was combined with a GEANT4 based simulation code allowing for the first time to address in detail the effects of scattering and of the magnetic field. The result, A = -0.994 +/- 0.010stat +/- 0.010syst, constitutes the most accurate value for the asymmetry parameter of a nuclear beta transition to date. The value is in agreement with the Standard Model prediction of A = -1 and provides new limits on tensor type charged weak currents.Comment: 11 pages, 2 figures; additional information was added on systematic effects, the magnetic field map and the calculation of the Qcos(theta) value

Experiments on Roll Waves in Air-Water Pipe Flow

Experiments on air-water two phase flow in inclined pipes have been made, with emphasis on the roll wave regime. The motivation for the work is the improving of 1D flow models for multiphase pipeline transport of oil and gas mixtures. Pressure and liquid fractions are recorded in time, together with video recordings. The results show that large amplitude roll waves have associated pressure jumps across the fronts. Some implications for the flow modelling are discussed

The half-life of 221^{221}Fr in Si and Au at 4K and at mK temperatures

The half-life of the $\alpha$ decaying nucleus $^{221}$Fr was determined in different environments, i.e. embedded in Si at 4 K, and embedded in Au at 4 K and about 20 mK. No differences in half-life for these different conditions were observed within 0.1%. Furthermore, we quote a new value for the absolute half-life of $^{221}$Fr of t$_{1/2}$ = 286.1(10) s, which is of comparable precision to the most precise value available in literature

Episkeletozoans and bioerosional ichnotaxa on isolated bones of Late Cretaceous mosasaurs and cheloniid turtles from the Maastricht area, the Netherlands

Isolated bones of three taxa of marine reptiles (Mosasaurus hoffmannii Mantell, Plioplatecarpus marshi Dollo and Allopleuron hofmanni (Gray)) from various levels within the Maastricht Formation (upper Maastrichtian) at the former ENCI-HeidelbergCement Group quarry (Maastricht, the Netherlands) exhibit bioerosional traces and encrustation. Episkeletozoans include dimyid, ostreid and monopleurid bivalves, at least three species of cheilostome and cyclostome bryozoans and two adnate calcareous foraminifera. The bones show biting traces (Gnathichnus pentax Bromley, Linichnus cf. serratus Jacobsen & Bromley and Machichnus isp.), as well as borings. The latter may be referred to Karethraichnus lakkos Zonneveld, Bartels, Gunnell & McHugh, which is here considered to be a junior synonym of Gastrochaenolites isp

Precision measurements of the 60^{60}Co β\beta-asymmetry parameter in search for tensor currents in weak interactions

The $\beta$-asymmetry parameter $\widetilde{A}$ for the Gamow-Teller decay of $^{60}$Co was measured by polarizing the radioactive nuclei with the brute force low-temperature nuclear-orientation method. The $^{60}$Co activity was cooled down to milliKelvin temperatures in a $^3$He-$^4$He dilution refrigerator in an external 13 T magnetic field. The $\beta$ particles were observed by a 500 ${\mu}m$ thick Si PIN diode operating at a temperature of about 10 K in a magnetic field of 0.6 T. Extensive GEANT4 Monte-Carlo simulations were performed to gain control over the systematic effects. Our result, $\widetilde{A} = -1.014(12)_{stat}(16)_{syst}$, is in agreement with the Standard-Model value of $-0.987(9)$, which includes recoil-order corrections that were addressed for the first time for this isotope. Further, it enables limits to be placed on possible tensor-type charged weak currents as well as other physics beyond the Standard Model

Hyperfine Field and Hyperfine Anomalies of Copper Impurities in Iron

A new value for the hyperfine magnetic field of copper impurities in iron is obtained by combining resonance frequencies from experiments involving {\beta}-NMR on oriented nuclei on 59-Cu, 69-Cu, and 71-Cu with magnetic moment values from collinear laser spectroscopy measurements on these isotopes. The resulting value, i.e., Bhf(CuFe) = -21.794(10) T, is in agreement with the value adopted until now but is an order of magnitude more precise. It is consistent with predictions from ab initio calculations. Comparing the hyperfine field values obtained for the individual isotopes, the hyperfine anomalies in Fe were determined to be 59{\Delta}69=0.15(9)% and 71{\Delta}69=0.07(11)%.Comment: 6 pages, 2 figures, 3 table

Localized Surface Plasmon Resonance Biosensing with Large Area of Gold Nanoholes Fabricated by Nanosphere Lithography

Localized surface plasmon resonance (LSPR) has been extensively studied as potential chemical and biological sensing platform due to its high sensitivity to local refractive index change induced by molecule adsorbate. Previous experiments have demonstrated the LSPR generated by gold nanoholes and its biosensing. Here, we realize large uniform area of nanoholes on scale of cm2 on glass substrate by nanosphere lithography which is essential for mass production. The morphology of the nanoholes is characterized using scanning electron microscope and atomic force microscope. The LSPR sensitivity of the nanoholes to local refractive index is measured to be 36 nm/RIU. However, the chip has demonstrated high sensitivity and specificity in biosensing: bovine serum albumin adsorption is detected with LSPR peak redshift of 27 nm, and biotin-streptavidin immunoassay renders a LSPR redshift of 11 nm. This work forms a foundation toward the cost-effective, high-throughput, reliable and robust chip-based LSPR biosensor

Microfabrication and Applications of Opto-Microfluidic Sensors

A review of research activities on opto-microfluidic sensors carried out by the research groups in Canada is presented. After a brief introduction of this exciting research field, detailed discussion is focused on different techniques for the fabrication of opto-microfluidic sensors, and various applications of these devices for bioanalysis, chemical detection, and optical measurement. Our current research on femtosecond laser microfabrication of optofluidic devices is introduced and some experimental results are elaborated. The research on opto-microfluidics provides highly sensitive opto-microfluidic sensors for practical applications with significant advantages of portability, efficiency, sensitivity, versatility, and low cost

Dielectric nanohole array metasurface for high-resolution near-field sensing and imaging

Dielectric metasurfaces support resonances that are widely explored both for far-field wavefront shaping and for near-field sensing and imaging. Their design explores the interplay between localised and extended resonances, with a typical trade-off between Q-factor and light localisation; high Q-factors are desirable for refractive index sensing while localisation is desirable for imaging resolution. Here, we show that a dielectric metasurface consisting of a nanohole array in amorphous silicon provides a favourable trade-off between these requirements. We have designed and realised the metasurface to support two optical modes both with sharp Fano resonances that exhibit relatively high Q-factors and strong spatial confinement, thereby concurrently optimizing the device for both imaging and biochemical sensing. For the sensing application, we demonstrate a limit of detection (LOD) as low as 1 pg/ml for Immunoglobulin G (IgG); for resonant imaging, we demonstrate a spatial resolution below 1 µm and clearly resolve individual E. coli bacteria. The combined low LOD and high spatial resolution opens new opportunities for extending cellular studies into the realm of microbiology, e.g. for studying antimicrobial susceptibility