Internal and external cooling methods and their effect on body temperature, thermal perception and dexterity

© 2018 The Authors. Published by PLOS. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.1371/journal.pone.0191416© 2018 Maley et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Objective The present study aimed to compare a range of cooling methods possibly utilised by occupational workers, focusing on their effect on body temperature, perception and manual dexterity. Methods Ten male participants completed eight trials involving 30 min of seated rest followed by 30 min of cooling or control of no cooling (CON) (34C, 58% relative humidity). The cooling methods utilised were: ice cooling vest (CV0), phase change cooling vest melting at 14C (CV14), evaporative cooling vest (CVEV), arm immersion in 10C water (AI), portable water-perfused suit (WPS), heliox inhalation (HE) and ice slushy ingestion (SL). Immediately before and after cooling, participants were assessed for fine (Purdue pegboard task) and gross (grip and pinch strength) manual dexterity. Rectal and skin temperature, as well as thermal sensation and comfort, were monitored throughout. Results Compared with CON, SL was the only method to reduce rectal temperature (P = 0.012). All externally applied cooling methods reduced skin temperature (P0.05). Conclusion The present study observed that ice ingestion or ice applied to the skin produced the greatest effect on rectal and skin temperature, respectively. AI should not be utilised if workers require subsequent fine manual dexterity. These results will help inform future studies investigating appropriate pre-cooling methods for the occupational worker.This project is financially supported by the US Government through the Technical Support Working Group within the Combating Terrorism Technical Support Office.Published versio

Understanding user satisfaction evaluation in low occupancy sustainable workplaces

This paper presents the findings of a post-occupancy evaluation (POE) applied to a building in the UK. The design of the building was generated through an externally funded research project over two years from 2005 to 2007. The construction of the building was completed in 2010. After a period of occupancy, a POE of the building was carried out in 2015. The POE offered an opportunity to investigate the effect of occupant behaviour on the performance of the building and their level of comfort and satisfaction. We adopted a field survey method to evaluate the comfort and satisfaction of users by asking them a series of questions to analyse how they felt in different parts of the building throughout the course of the year. In our analysis, the users were prompted to provide a subjective measure of the building regarding a range of internal conditions such as air temperature, humidity, air movement, air quality, daylight, artificial light, and noise. The analysis supports the notion that in naturally-ventilated buildings some users may find the building to be hot in summer while cold in winter. The high level of control the users have over the operation of the building contributes to their comfort and satisfaction. The users demonstrated a tendency to be satisfied despite environmental factors and to forgive some aspects of the building which are not performing as they should. The paper offers a perspective on statistical user satisfaction in a low occupancy building and attempts to explain the role of workplace wellbeing on occupant perception of comfort in this case

An overt chemical protective garment reduces thermal strain compared with a covert garment in warm-wet but not hot-dry environments

© 2017 The Authors. Published by Frontiers Media. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3389/fphys.2017.00913© 2017 Maley, Costello, Borg, Bach, Hunt and Stewart. Objectives: A commercial chemical, biological, radiological and nuclear (CBRN) protective covert garment has recently been developed with the aim of reducing thermal strain. A covert CBRN protective layer can be worn under other clothing, with equipment added for full chemical protection when needed. However, it is unknown whether the covert garment offers any alleviation to thermal strain during work compared with a traditional overt ensemble. Therefore, the aim of this study was to compare thermal strain and work tolerance times during work in an overt and covert ensemble offering the same level of CBRN protection. Methods: Eleven male participants wore an overt (OVERT) or covert (COVERT) CBRN ensemble and walked (4 km·h-1, 1% grade) for a maximum of 120 min in either a wet bulb globe temperature [WBGT] of 21, 30, or 37°C (Neutral, WarmWet and HotDry, respectively). The trials were ceased if the participants' gastrointestinal temperature reached 39°C, heart rate reached 90% of maximum, walking time reached 120 min or due to self-termination. Results: All participants completed 120 min of walking in Neutral. Work tolerance time was greater in OVERT compared with COVERT in WarmWet (P 0.05). Conclusion: Those dressed in OVERT experienced lower thermal strain and longer work tolerance times compared with COVERT in a warm-wet environment. However, COVERT may be an optimal choice in a hot-dry environment. These findings have practical implications for those making decisions on the choice of CBRN ensemble to be used during work.This project is financially supported by the Australian Government, managed by the National Security Science and Technology Centre within the Defence Science and Technology Organization, and the US Government through the Technical Support Working Group within the Combating Terrorism Technical Support Office.Published versio

Coupling a model of human thermoregulation with computational fluid dynamics for predicting human-environment interaction

This paper describes the methods developed to couple a commercial CFD program with a multi-segmented model of human thermal comfort and physiology. A CFD model is able to predict detailed temperatures and velocities of airflow around a human body, whilst a thermal comfort model is able to predict the response of a human to the environment surrounding it. By coupling the two models and exchanging information about the heat transfer at the body surface the coupled system can potentially predict the response of a human body to detailed local environmental conditions. This paper presents a method of exchanging data, using shared files, to provide a means of dynamically exchanging simulation data with the IESD-Fiala model during the CFD solution process. Additional code is used to set boundary conditions for the CFD simulation at the body surface as determined by the IESD-Fiala model and to return information about local environmental conditions adjacent to the body surface as determined by the CFD simulation. The coupled system is used to model a human subject in a naturally ventilated environment. The resulting ventilation flow pattern agrees well with other numerical and experimental work

Acute taurine supplementation enhances thermoregulation and endurance cycling performance in the heat

This study investigated the effects of oral taurine supplementation on cycling time to exhaustion at a fixed-intensity and thermoregulation in the heat. In a double-blind, randomised crossover design, 11 healthy males participated in a time to exhaustion test in the heat (35°C, 40% RH), cycling at the power output associated with ventilatory threshold, 2 h after ingesting: Taurine (50 mg kg-1) or placebo (3 mg kg-1 maltodextrin). Core and mean skin temperature, mean sweat rate, heart rate, rating of perceived exertion (RPE), thermal comfort and thermal sensation were measured during exercise and blood lactate concentration (B[La]) was measured after exercise. Taurine supplementation increased time to exhaustion by 10% (25.16 min vs. 22.43 min, p = 0.040), end sweat rate by 12.7% (687 nL min-1 vs. 600 nL min-1, p = 0.034) and decreased B[La] by 16.5% (5.75 mmol L-1 vs. 6.85 mmol L-1, p = 0.033). Core temperature was lower in the final 10% of the time to exhaustion (38.5°C vs. 38.1°C, p = 0.049). Taurine supplementation increased time to exhaustion and local sweating, while decreasing RPE and core temperature in the later stages of exercise, as well as reducing post-exercise B[La]. This study provides the evidence of taurine's role in thermoregulatory processes. These findings have implications for the short-term preparation strategies of individuals exercising in the heat. Based on these findings, a single dose of taurine 2 h prior to training or competition would provide an ergogenic and thermoregulatory effect

Prognostic potential of body composition indices in detecting risk of musculoskeletal injury in army officer cadet profiles.

OBJECTIVES: High values in most of the body composition indices have been related to musculoskeletal injuries, but limited data exists on the accuracy of these diagnoses when detecting musculoskeletal injuries in military populations. METHODS: The suitability of body fat percentage, body mass index, fat mass index and fat free mass index to identify injury risk was examined in a group of army officer recruits. All body composition diagnoses were measured in 268 male army officer recruits prior to the commencement of basic combat training. Musculoskeletal injury was identified using codes from the International Classification of Diseases. The area under the curve, in the receiver operating characteristic curve, was used to quantify the overall ability to discriminate between those who were injured and those who were not. RESULTS: The statistics indicated that all indices, apart from body mass index, had a significant possibility to detect musculoskeletal injury potential (p 22, for fat mass index >6.5 and for fat free mass index <16.5. CONCLUSION: Body mass index values can not similarly detect the possibility of occurrence of musculoskeletal injuries in army officer recruits, just as other body composition diagnoses related to fat mass or/and free fat mass. However, the cut off-points related to the overall diagnostic performance of each body composition index should be used with caution and in accordance with the aims of each experimental setting