Fermentation study for the production of hepatitis B virus pre-S2 antigen by the methylotrophic yeast Hansenula polymorpha.

Various physico-chemical parameters have been studied in order to improve the production of hepatitis B virus pre-S2 antigen (middle surface antigen) by the methylotrophic yeast Hansenula polymorpha. Antigen production was done in two steps: first, production of cells on glycerol (Phase 1), followed by induction of antigen expression with methanol (Phase 2). Dense cultures of H. polymorpha, equivalent to 35-40 g/l (dry weight), were readily obtained in small fermenters using minimal medium containing glycerol as carbon source. Antigen expression in this minimal medium, after induction with methanol, was however, low and never exceeded 1.6 mg/l of culture. Antigen production was greatly enhanced by adding complex organic nitrogen sources along with methanol at induction time; yeast extract was the best of all the sources tested. In shake flasks, antigen production was proportional to yeast extract concentration up to 7% (w/v) yeast extract, it became clear the the nutritional conditions for good antigen expression were different from those for good biomass production. The effects of yeast extract were reproduced in small fermenters: antigen levels reached 8-9 mg/l in medium containing 6% (w/v) yeast extract during induction with methanol. The mechanisms of yeast extract's effects are still unknown but are probably nutritional. The recombinant H. polymorpha strain produced both periplasmic and intracellular antigen. The periplasmic antigen was shown to be present as 20-22-nm particles and was therefore immunogenic. Immunoblotting indicated that part of the pre-S2 antigen was present as a 24-kDa degradation product. These studies have led to a 140-fold increase in volumetric productivity of antigen and to a 4.6-fold increase in specific production

Assessment of Platelet REACtivity After Transcatheter Aortic Valve Replacement : The REAC-TAVI Trial

The REAC-TAVI (Assessment of platelet REACtivity after Transcatheter Aortic Valve Implantation) trial enrolled patients with aortic stenosis (AS) undergoing transcatheter aortic valve replacement (TAVR) pre-treated with aspirin + clopidogrel, aimed to compare the efficacy of clopidogrel and ticagrelor in suppressing high platelet reactivity (HPR) after TAVI. Current recommendations support short-term use of aspirin + clopidogrel for patients with severe AS undergoing TAVR despite the lack of compelling evidence. This was a prospective, randomized, multicenter investigation. Platelet reactivity was measured at 6 different time points with the VerifyNow assay (Accriva Diagnostics, San Diego, California). HPR was defined as (P2Y reaction units (PRU) ≥208. Patients with HPR before TAVR were randomized to either aspirin + ticagrelor or aspirin + clopidogrel for 3 months. Patients without HPR continued with aspirin + clopidogrel (registry cohort). The primary endpoint was non-HPR status (PRU <208) in ≥70% of patients treated with ticagrelor at 90 days post-TAVR. A total of 68 patients were included. Of these, 48 (71%) had HPR (PRU 273 ± 09) and were randomized to aspirin + ticagrelor (n = 24, PRU 277 ± 08) or continued with aspirin + clopidogrel (n = 24, PRU 269 ± 49). The remaining 20 patients (29%) without HPR (PRU 133 ± 12) were included in the registry. Overall, platelet reactivity across all the study time points after TAVR was lower in patients randomized to ticagrelor compared with those treated with clopidogrel, including those enrolled in the registry (p < 0.001). The primary endpoint was achieved in 100% of patients with ticagrelor compared with 21% with clopidogrel (p < 0.001). Interestingly, 33% of clopidogrel responder patients at baseline developed HPR status during the first month after TAVR. HPR to clopidogrel is present in a considerable number of patients with AS undergoing TAVR. Ticagrelor achieves a better and faster effect, providing sustained suppression of HPR to these patients. (Platelet Reactivity After TAVI: A Multicenter Pilot Study [REAC-TAVI]; NCT02224066

Laser-assisted decay spectroscopy for the ground states of 180,182Au^180,182Au

status: publishe

Hyperfine anomaly in gold and magnetic moments of Ipi=11/2−I^pi=11/2^- gold isomers

status: publishe

Laser-assisted decay spectroscopy and mass spectrometry of 178Au^178Au

A comprehensive study of the isotope 178Au has been made at the CERN-ISOLDE facility, using resonance laser ionization. Two long-lived states in 178Au were identified—a low-spin ground state and a high-spin isomer—each of which were produced as pure beams. Using the ISOLTRAP precision Penning trap, the excitation energy of the isomeric state in 178Au was determined to be E∗=189(14)keV. The α-decay fine structure patterns of the two states were studied using the Windmill decay station, providing information on the low-lying states in the daughter nucleus 174Ir. Nuclear spin assignments of I(178Aug)=(2,3) and I(178Aum)=(7,8) are made based on the observed β-decay feeding and hyperfine structure intensity patterns. These spin assignments are used for fitting the hyperfine structures of the two states from which values for the magnetic dipole moments are extracted. The extracted moments are compared with calculations using additivity relations to establish the most probable configurations for 178Aug,m

Plasma-wall interaction studies within the EUROfusion consortium: Progress on plasma-facing components development and qualification

This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma-material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested in the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.European Commission; Consortium for Ocean Leadership 633053; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures

Change in structure between the I = 1/2 states in 181Tl and 177,179Au

The first accurate measurements of the α-decay branching ratio and half-life of the Iπ=1/2+ ground state in 181Tl have been made, along with the first determination of the magnetic moments and I=1/2 spin assignments of the ground states in 177,179Au. The results are discussed within the complementary systematics of the reduced α-decay widths and nuclear g factors of low-lying, Iπ=1/2+ states in the neutron-deficient lead region. The findings shed light on the unexpected hindrance of the 1/2+→1/2+, 181Tl→g177Aug α decay, which is explained by a mixing of π3s1/2 and π2d3/2 configurations in 177Aug, whilst 181Tlg remains a near-pure π3s1/2. This conclusion is inferred from the g factor of 177Aug which has an intermediate value between those of π3s1/2 and π2d3/2 states. A similar mixed configuration is proposed for the Iπ=1/2+ ground state of 179Au. This mixing may provide evidence for triaxial shapes in the ground states in these nuclei

L'analyse environnementale des Hépatotoxines : La spectrométrie de masse en temps de vol couplée à la chromatographie liquide

Cette étude concerne l'analyse des hépatotoxines par chromatographie liquide couplée au spectromètre de masse en temps de vol. Le spectromètre de masse offre la spécificité nécessaire pour l'identification et la quantification des analytes grâce à des ions caractéristiques différents. Une comparaison de la méthode développée avec les résultats obtenus grâce au test PP2A démontre également la complémentarité des 2 techniques