114 research outputs found
On Extracting Mechanical Properties from Nanoindentation at Temperatures up to 1000C
Alloyed MCrAlY bond coats, where M is usually cobalt and/or nickel, are
essential parts of modern turbine blades, imparting environmental resistance
while mediating thermal expansivity differences. Nanoindentation allows the
determination of their properties without the complexities of traditional
mechanical tests, but was not previously possible near turbine operating
temperatures.
Here, we determine the hardness and modulus of CMSX-4 and an Amdry-386 bond
coat by nanoindentation up to 1000C. Both materials exhibit a
constant hardness until 400C followed by considerable softening,
which in CMSX-4 is attributed to the multiple slip systems operating underneath
a Berkovich indenter.
The creep behaviour has been investigated via the nanoindentation hold
segments. Above 700C, the observed creep exponents match the
temperature-dependence of literature values in CMSX-4. In Amdry-386,
nanoindentation produces creep exponents very close to literature data,
implying high-temperature nanoindentation may be powerful in characterising
these coatings and providing inputs for material, model and process
optimisations
Microcompression experiments on glasses ‐ strain rate sensitive cracking behavior
Figure 11 – microcompression experiments on glasses showing stable crack growth (a) and reversible deformation (b)
It is well known that the mechanical properties of glasses are closely related to their atomic structure. The exact structure-property-relationship, however, is only poorly understood even for fundamental mechanisms like shear and densification. Nanomechanical test methods like micropillar compression and nano indentation can help fill this gap. In this study a sodium-boro-silicate glass is quenched from different temperatures to induce changes in the atomic structure. Micropillar compression was used to introduce plastic deformation into these glasses at room temperature under a uniaxial stress state. By changing the strain rate it is shown that deformation shifts from completely reversible deformation, to stable crack growth, and finally brittle failure. It is shown that by changing the glass structure, the strain rates corresponding to these deformation regimes are shifted. Finally, the occurrence of shear and densification is discussed. These findings are analysed against the background of the glass structure.
Please click Additional Files below to see the full abstract
Room temperature deformation mechanisms of the C14 Laves Phase in the Mg‐Al‐Ca system
In order to improve the creep resistance of magnesium alloys and thereby increase their operating temperature, hard intermetallic phases can be incorporated in the microstructure. In particular the addition of Al or Ca to Mg results in the formation of a skeleton-like intermetallic structure at the grain boundaries. This structure consists predominately of Laves phases, which reduces the minimum creep rate by a few orders of magnitude. In bulk, these Laves phases are extremely brittle at low temperatures, limiting our understanding of the underlying mechanisms of plasticity. Additionally, the small size of the microstructural features in technical alloys make bulk-scale tests unsuitable for studying these phases. Using nanomechanical testing (nanoindentation and microcompression) in individual grains, cracking can be suppressed and plastic deformation can be observed [1]. Micropillars were milled using FIB in individual grains of a polycrystalline specimen, and orientations determined by EBSD to activate and interrogate slip systems. These data have then been combined with slip line analysis around indents. Such an approach reveals the presence of pyramidal, prismatic and basal slip at ambient conditions, with pyramidal 1st order being the predominant slip plane. Critical resolved shear stresses for these slip systems have been calculated, and TEM analysis of the deformation microstructure performed. This work therefore exemplifies how nanomechanical testing in conjunction with electron microscopy can extend the current knowledge of plasticity in macroscopically brittle crystals.
[1] S. Korte, W.J. Clegg, Studying Plasticity in Hard and Soft Nb–Co Intermetallics, Advanced Engineering Materials, 14, No. 11 (2012), 991-99
Using impact‐nanoindentation to test glasses at high strain rates and room temperature
In many daily applications glasses are indispensable, and novel applications demanding improved strength and crack resistance are appearing continuously. Up to now, the fundamental mechanical processes in glasses subjected to high strain rates at room temperature are largely unknown and thus guidelines for one of the major failure conditions of glass components are non-existent. Here, we elucidate this important regime for the first time using glasses ranging from a dense metallic glass to open fused silica by impact as well as quasi-static nano-indentation. We show that towards high strain rates, shear deformation becomes the dominant mechanism in all glasses accompanied by Non-Newtonian behavior evident in a drop of viscosity with increasing rate covering eight orders of magnitude. All glasses converge to the same limit stress determined by the theoretical hardness, thus giving the first experimental and quantitative evidence that Non-Newtonian shear flow occurs at the theoretical strength at room temperature
Gene expression analysis in the pathogenesis of chronic immune thrombocytopenia in children
BackgroundA complex multifactorial dysregulation of immune system, including cytokines and autoantibodies production, and also proteins modification underlay the primary mechanism of immune thrombocytopenia (ITP). Specific genetic profile of ITP patients is presumed, especially those with a long and complex natural history of the disease.Aim of the studyGene expression analysis of VNN1 and PPARγ in children with immune thrombocytopenia.Materials and methodsCandidate genes were identified with microarray cDNA procedure. For the validation of VNN1 and PPARγ expression changes we used qRT-PCR performed comparatively in samples of newly diagnosed ITP (ndITP, n=16), chronic ITP (cITP, n=8) and patients without thrombocytopenia (n=5).ResultsWe analyzed the data of patients, followed for at least 12 months after ITP diagnosis. No significant differences of VNN1 expression profile were found in between groups (p>0.05). Lower signatures of mean PPARγ normalized expression values were noticed in chronic ITP patients in contrast to newly diagnosed ITP subjects (p=0.009). Differences between VNN1/PPARγ ratio values found in ndITP group comparing to subjects with progression to cITP were close to statistical significance (p=0.054).ConclusionsAnalysis of the VNN1 and PPARγ expression profiles utility in children diagnosed with ITP requires further investigation
Recommended from our members
Complete and Prolonged Response to Immune Checkpoint Blockade in POLE-Mutated Colorectal Cancer
Enid Robertson Logan Faculty Fellowship Fund6 month embargo; published online: 21 June 2019This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]
Immunoglobulin and T Cell Receptor Gene High-Throughput Sequencing Quantifies Minimal Residual Disease in Acute Lymphoblastic Leukemia and Predicts Post-Transplantation Relapse and Survival
AbstractMinimal residual disease (MRD) quantification is an important predictor of outcome after treatment for acute lymphoblastic leukemia (ALL). Bone marrow ALL burden ≥ 10−4 after induction predicts subsequent relapse. Likewise, MRD ≥ 10−4 in bone marrow before initiation of conditioning for allogeneic (allo) hematopoietic cell transplantation (HCT) predicts transplantation failure. Current methods for MRD quantification in ALL are not sufficiently sensitive for use with peripheral blood specimens and have not been broadly implemented in the management of adults with ALL. Consensus-primed immunoglobulin (Ig), T cell receptor (TCR) amplification and high-throughput sequencing (HTS) permit use of a standardized algorithm for all patients and can detect leukemia at 10−6 or lower. We applied the LymphoSIGHT HTS platform (Sequenta Inc., South San Francisco, CA) to quantification of MRD in 237 samples from 29 adult B cell ALL patients before and after allo-HCT. Using primers for the IGH-VDJ, IGH-DJ, IGK, TCRB, TCRD, and TCRG loci, MRD could be quantified in 93% of patients. Leukemia-associated clonotypes at these loci were identified in 52%, 28%, 10%, 35%, 28%, and 41% of patients, respectively. MRD ≥ 10−4 before HCT conditioning predicted post-HCT relapse (hazard ratio [HR], 7.7; 95% confidence interval [CI], 2.0 to 30; P = .003). In post-HCT blood samples, MRD ≥10−6 had 100% positive predictive value for relapse with median lead time of 89 days (HR, 14; 95% CI, 4.7 to 44, P < .0001). The use of HTS-based MRD quantification in adults with ALL offers a standardized approach with sufficient sensitivity to quantify leukemia MRD in peripheral blood. Use of this approach may identify a window for clinical intervention before overt relapse
The role of CD8+ T cell clones in immune thrombocytopenia
Immune thrombocytopenia (ITP) is traditionally considered an antibody-mediated disease. However, a number of features suggest alternative mechanisms of platelet destruction. In this study, we use a multi-dimensional approach to explore the role of cytotoxic CD8+ T cells in ITP. We characterised patients with ITP and compared them to age-matched controls using immunophenotyping, next-generation sequencing of T cell receptor (TCR) genes, single-cell RNA sequencing, and functional T cell and platelet assays. We found that adults with chronic ITP have increased polyfunctional, terminally differentiated effector memory CD8+ T cells (CD45RA+CD62L-) expressing intracellular interferon-g, tumour necrosis factor-a, and Granzyme B defining them as TEMRA cells. These TEMRA cells expand when the platelet count falls and show no evidence of physiological exhaustion. Deep sequencing of the T cell receptor showed expanded T cell clones in patients with ITP. T cell clones persisted over many years, were more prominent in patients with refractory disease, and expanded when the platelet count was low. Combined single-cell RNA and TCR sequencing of CD8+ T cells confirmed that the expanded clones are TEMRA cells. Using in vitro model systems, we show that CD8+ T cells from patients with ITP form aggregates with autologous platelets, release interferon-g and trigger platelet activation and apoptosis through TCR-mediated release of cytotoxic granules. These findings of clonally expanded CD8+ T cells causing platelet activation and apoptosis provide an antibody-independent mechanism of platelet destruction, indicating that targeting specific T-cell clones could be a novel therapeutic approach for patients with refractory ITP
Micromechanical Properties of Injection-Molded Starch–Wood Particle Composites
The micromechanical properties of injection molded starch–wood particle composites were investigated as a function of particle content and humidity conditions.
The composite materials were characterized by scanning electron microscopy and X-ray diffraction methods. The microhardness
of the composites was shown to increase notably with the concentration of the wood particles. In addition,creep behavior under the indenter and temperature dependence
were evaluated in terms of the independent contribution of the starch matrix and the wood microparticles to the hardness value. The influence of drying time on the density
and weight uptake of the injection-molded composites was highlighted. The results revealed the role of the mechanism of water evaporation, showing that the dependence of water uptake and temperature was greater for the starch–wood composites than for the pure starch sample. Experiments performed during the drying process at 70°C indicated that
the wood in the starch composites did not prevent water loss from the samples.Peer reviewe
Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries
Abstract
Background
Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres.
Methods
This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries.
Results
In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia.
Conclusion
This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries
- …