The role of rock joint frictional strength in the containment of fracture propagation

The fracturing phenomenon within the reservoir environment is a complex process that is controlled by several factors and may occur either naturally or by artificial drivers. Even when deliberately induced, the fracturing behaviour is greatly influenced by the subsurface architecture and existing features. The presence of discontinuities such as joints, artificial and naturally occurring faults and interfaces between rock layers and microfractures plays an important role in the fracturing process and has been known to significantly alter the course of fracture growth. In this paper, an important property (joint friction) that governs the shear behaviour of discontinuities is considered. The applied numerical procedure entails the implementation of the discrete element method to enable a more dynamic monitoring of the fracturing process, where the joint frictional property is considered in isolation. Whereas fracture propagation is constrained by joints of low frictional resistance, in non-frictional joints, the unrestricted sliding of the joint plane increases the tendency for reinitiation and proliferation of fractures at other locations. The ability of a frictional joint to suppress fracture growth decreases as the frictional resistance increases; however, this phenomenon exacerbates the influence of other factors including in situ stresses and overburden conditions. The effect of the joint frictional property is not limited to the strength of rock formations; it also impacts on fracturing processes, which could be particularly evident in jointed rock masses or formations with prominent faults and/or discontinuities

A Criterion for Brittle Failure of Rocks Using the Theory of Critical Distances

This paper presents a new analytical criterion for brittle failure of rocks and heavily overconsolidated soils. Griffith’s model of a randomly oriented defect under a biaxial stress state is used to keep the criterion simple. The Griffith’s criterion is improved because the maximum tensile strength is not evaluated at the boundary of the defect but at a certain distance from the boundary, known as the critical distance. This fracture criterion is known as the Point Method, and is part of the Theory of Critical Distances, which is utilized in fracture mechanics. The proposed failure criterion has two parameters: the inherent tensile strength, ó0, and the ratio of the half-length of the initial crack/flaw to the critical distance, a/L. These parameters are difficult to measure but they may be correlated with the uniaxial compressive and tensile strengths, óc and ót. The proposed criterion is able to reproduce the common range of strength ratios for rocks and heavily overconsolidated soils (óc/ót=3-50) and the influence of several microstructural rock properties, such as texture and porosity. Good agreement with laboratory tests reported in the literature is found for tensile and low confining stresses.The work presented was initiated during a research project on “Structural integrity assessments of notch-type defects", for the Spanish Ministry of Science and Innovation (Ref.: MAT2010-15721)

Geological discontinuity persistence: Implications and quantification

Persistence of geological discontinuities is of great importance for many rock-related applications in earth sciences, both in terms of mechanical and hydraulic properties of individual discontinuities and fractured rock masses. Although the importance of persistence has been identified by academics and practitioners over the past decades, quantification of areal persistence remains extremely difficult; in practice, trace length from finite outcrop is still often used as an approximation for persistence. This paper reviews the mechanical behaviour of individual discontinuities that are not fully persistent, and the implications of persistence on the strength and stability of rock masses. Current techniques to quantify discontinuity persistence are then examined. This review will facilitate application of the most applicable methods to measure or predict persistence in rock engineering projects, and recommended approaches for the quantification of discontinuity persistence. Furthermore, it demonstrates that further research should focus on the development of persistence quantification standards to promote our understanding of rock mass behaviours including strength, stability and permeability

Rock Mass Classification

viii, 271 Hal.; 22 C