Magnetic Properties of 2-Dimensional Dipolar Squares: Boundary Geometry Dependence

By means of the molecular dynamics simulation on gradual cooling processes, we investigate magnetic properties of classical spin systems only with the magnetic dipole-dipole interaction, which we call dipolar systems. Focusing on their finite-size effect, particularly their boundary geometry dependence, we study two finite dipolar squares cut out from a square lattice with $\Phi=0$ and $\pi/4$, where $\Phi$ is an angle between the direction of the lattice axis and that of the square boundary. Distinctly different results are obtained in the two dipolar squares. In the $\Phi=0$ square, the ``from-edge-to-interior freezing'' of spins is observed. Its ground state has a multi-domain structure whose domains consist of the two among infinitely (continuously) degenerated Luttinger-Tisza (LT) ground-state orders on a bulk square lattice, i.e., the two antiferromagnetically aligned ferromagnetic chains (af-FMC) orders directed in parallel to the two lattice axes. In the $\Phi=\pi/4$ square, on the other hand, the freezing starts from the interior of the square, and its ground state is nearly in a single domain with one of the two af-FMC orders. These geometry effects are argued to originate from the anisotropic nature of the dipole-dipole interaction which depends on the relative direction of sites in a real space of the interacting spins.Comment: 21 pages, 13 figures, submitted to Journal of Physical Society Japa

Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar

This paper presents the effects of nano silica (NS), micro silica (MS) and combined NS and MS on bond behaviour of steel and polypropylene (PP) fibres in high volume fly ash (HVFA) mortar. Three types of bend configuration of hook-end steel fibre commercially available are considered, while the PP fibre was crimped shape. Three different fly ash contents of 40%, 50% and 60% (by wt) as partial replacement of ordinary Portland cement (OPC) are considered in HVFA mortar, while a control mortar containing 100% OPC was also considered. The NS and the MS was added as 2% and 10% (by wt), respectively as partial replacement of OPC in HVFA mortar containing 40% fly ash. In the case of combined NS and MS, 2% NS and 10% MS was used as partial replacement of OPC in HVFA mortar. However, in the case of HVFA mortars containing 40% fly ash and different NS and MS, total OPC content of 60% was kept constant in all HVFA mixes containing NS, MS and NS + MS. This was considered to compare these mixes with HVFA mortar containing 40% fly ash. Results indicate that maximum pull-out force of both steel and PP fibres decreases with increase in fly ash contents in HVFA mortars at both 7 and 28 days.The addition of 2% NS and 10% MS showed almost similar improvement in the maximum pull-out force of steel and PP fibres at both ages in HVFA mortar containing 40% fly ash. The combined use of 2%NS + 10%MS also improved the maximum pull-out force and higher than 2% NS and 10% MS. The reduction in large capillary pores in HVFA mortars containing nano and micro silica observed in Mercury Intrusion Porosity test improved the bond of steel and PP fibres in those mortar due to formation of additional calcium silicate hydrate (C-S-H) gel is believed to be the reason behind this improvement. The maximum pull-out force also increased with increase in number of bends in the hook-end of steel fibre in all mortars in this study at both 7 and 28 days. Extra energy absorbed by the higher number of bends is the reason of such improvement in maximum pull-out force. However, in the case of absorbed energy mixed results are observed in the case of different number of bends in steel fibre ends. Good correlations also exist between the maximum pull-out forces of all three types of steel fibres with compressive strength of mortars showing strong influence on the bond behaviour

Superconducting Transition Temperature in Heterogeneous Ferromagnet-Superconductor Systems

We study the shift of the the superconducting transition temperature $T_c$ in ferromagnetic-superconducting bi-layers and in a superconducting film supplied a square array of ferromagnetic dots. We find that the transition temperature in these two cases change presumably in opposite direction and that its change is not too small. We extend these results to multilayer structures. We predict that rather small external magnetic field $\sim 10$ Oe can change the transition temperature of the bilayer by 10% .Comment: 9 pages, 2 figure

Seroprevalence of avian influenza A (H5N1) virus among poultry workers in Jiangsu Province, China: an observational study

<p>Abstract</p> <p>Background</p> <p>Since 2003 to 06 Jan 2012, the number of laboratory confirmed human cases of infection with avian influenza in China was 41 and 27 were fatal. However, the official estimate of the H5N1 case-fatality rate has been described by some as an over estimation since there may be numerous undetected asymptomatic/mild cases of H5N1 infection. This study was conducted to better understand the real infection rate and evaluate the potential risk factors for the zoonotic spread of H5N1 viruses to humans.</p> <p>Methods</p> <p>A seroepidemiological survey was conducted in poultry workers, a group expected to have the highest level of exposure to H5N1-infected birds, from 3 counties with habitat lakes of wildfowl in Jiangsu province, China. Serum specimens were collected from 306 participants for H5N1 serological test. All participants were interviewed to collect information about poultry exposures.</p> <p>Results</p> <p>The overall seropositive rate was 2.61% for H5N1 antibodies. The poultry number was found associated with a 2.39-fold significantly increased subclinical infection risk after adjusted with age and gender.</p> <p>Conclusions</p> <p>Avian-to -human transmission of avian H5N1 virus remained low. Workers associated with raising larger poultry flocks have a higher risk on seroconversion.</p

A single residue substitution in the receptor-binding domain of H5N1 hemagglutinin is critical for packaging into pseudotyped lentiviral particles

© 2012 Tang et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.Background: Serological studies for influenza infection and vaccine response often involve microneutralization and hemagglutination inhibition assays to evaluate neutralizing antibodies against human and avian influenza viruses, including H5N1. We have previously characterized lentiviral particles pseudotyped with H5-HA (H5pp) and validated an H5pp-based assay as a safe alternative for high-throughput serological studies in BSL-2 facilities. Here we show that H5-HAs from different clades do not always give rise to efficient production of H5pp and the underlying mechanisms are addressed. Methodology/Findings: We have carried out mutational analysis to delineate the molecular determinants responsible for efficient packaging of HA from A/Cambodia/40808/2005 (H5Cam) and A/Anhui/1/2005 (H5Anh) into H5pp. Our results demonstrate that a single A134V mutation in the 130-loop of the receptor binding domain is sufficient to render H5Anh the ability to generate H5Anh-pp efficiently, whereas the reverse V134A mutation greatly hampers production of H5Cam-pp. Although protein expression in total cell lysates is similar for H5Anh and H5Cam, cell surface expression of H5Cam is detected at a significantly higher level than that of H5Anh. We further demonstrate by several independent lines of evidence that the behaviour of H5Anh can be explained by a stronger binding to sialic acid receptors implicating residue 134. Conclusions: We have identified a single A134V mutation as the molecular determinant in H5-HA for efficient incorporation into H5pp envelope and delineated the underlying mechanism. The reduced binding to sialic acid receptors as a result of the A134V mutation not only exerts a critical influence in pseudotyping efficiency of H5-HA, but has also an impact at the whole virus level. Because A134V substitution has been reported as a naturally occurring mutation in human host, our results may have implications for the understanding of human host adaptation of avian influenza H5N1 virusesThis work was supported by grants from the Research Fund for the Control of Infectious Diseases of Hong Kong (RFCID#08070972), the Area of Excellence Scheme of the University Grants Committee (grant AoE/M-12/-06 of the Hong Kong Special Administrative Region, China), the French Ministry of Health, and the RESPARI project of the Institut Pasteur International Network

Photonics and fracture toughness of heterogeneous composite materials

Fracture toughness measures the resistance of a material to fracture. This fundamental property is used in diverse engineering designs including mechanical, civil, materials, electronics and chemical engineering applications. In spite of the advancements made in the past 40 years, the evaluation of this remains challenging for extremely heterogeneous materials such as composite concretes. By taking advantage of the optical properties of a thin birefringent coating on the surface of opaque, notched composite concrete beams, here we sense the evolution of the maximum shear stress distribution on the beams under loading. The location of the maximum deviator stress is tracked ahead of the crack tip on the experimental concrete samples under the ultimate load, and hence the effective crack length is characterised. Using this, the fracture toughness of a number of heterogeneous composite beams is evaluated and the results compare favourably well with other conventional methods using combined experimental and numerical/analytical approaches. Finally a new model, correlating the optically measured shear stress concentration factor and flexural strength with the fracture toughness of concretes is proposed. The current photonics-based study could be vital in evaluating the fracture toughness of even opaque and complex heterogeneous materials more effectively in future

The SDF-1α/CXCR4 Axis is Required for Proliferation and Maturation of Human Fetal Pancreatic Endocrine Progenitor Cells

The chemokine receptor CXCR4 and ligand SDF-1α are expressed in fetal and adult mouse islets. Neutralization of CXCR4 has previously been shown to diminish ductal cell proliferation and increase apoptosis in the IFNγ transgenic mouse model in which the adult mouse pancreas displays islet regeneration. Here, we demonstrate that CXCR4 and SDF-1α are expressed in the human fetal pancreas and that during early gestation, CXCR4 colocalizes with neurogenin 3 (ngn3), a key transcription factor for endocrine specification in the pancreas. Treatment of islet like clusters (ICCs) derived from human fetal pancreas with SDF-1α resulted in increased proliferation of epithelial cells in ICCs without a concomitant increase in total insulin expression. Exposure of ICCs in vitro to AMD3100, a pharmacological inhibitor of CXCR4, did not alter expression of endocrine hormones insulin and glucagon, or the pancreatic endocrine transcription factors PDX1, Nkx6.1, Ngn3 and PAX4. However, a strong inhibition of β cell genesis was observed when in vitro AMD3100 treatment of ICCs was followed by two weeks of in vivo treatment with AMD3100 after ICC transplantation into mice. Analysis of the grafts for human C-peptide found that inhibition of CXCR4 activity profoundly inhibits islet development. Subsequently, a model pancreatic epithelial cell system (CFPAC-1) was employed to study the signals that regulate proliferation and apoptosis by the SDF-1α/CXCR4 axis. From a selected panel of inhibitors tested, both the PI 3-kinase and MAPK pathways were identified as critical regulators of CFPAC-1 proliferation. SDF-1α stimulated Akt phosphorylation, but failed to increase phosphorylation of Erk above the high basal levels observed. Taken together, these results indicate that SDF-1α/CXCR4 axis plays a critical regulatory role in the genesis of human islets

Genetically-Based Olfactory Signatures Persist Despite Dietary Variation

Individual mice have a unique odor, or odortype, that facilitates individual recognition. Odortypes, like other phenotypes, can be influenced by genetic and environmental variation. The genetic influence derives in part from genes of the major histocompatibility complex (MHC). A major environmental influence is diet, which could obscure the genetic contribution to odortype. Because odortype stability is a prerequisite for individual recognition under normal behavioral conditions, we investigated whether MHC-determined urinary odortypes of inbred mice can be identified in the face of large diet-induced variation. Mice trained to discriminate urines from panels of mice that differed both in diet and MHC type found the diet odor more salient in generalization trials. Nevertheless, when mice were trained to discriminate mice with only MHC differences (but on the same diet), they recognized the MHC difference when tested with urines from mice on a different diet. This indicates that MHC odor profiles remain despite large dietary variation. Chemical analyses of urinary volatile organic compounds (VOCs) extracted by solid phase microextraction (SPME) and analyzed by gas chromatography/mass spectrometry (GC/MS) are consistent with this inference. Although diet influenced VOC variation more than MHC, with algorithmic training (supervised classification) MHC types could be accurately discriminated across different diets. Thus, although there are clear diet effects on urinary volatile profiles, they do not obscure MHC effects