40 research outputs found
Shortwave radiative forcing and efficiency of key aerosol types using AERONET data
The shortwave radiative forcing (&Delta;<i>F</i>) and the radiative forcing efficiency (&Delta;<i>F</i><sup>eff</sup>) of natural and anthropogenic aerosols have been analyzed using estimates of radiation both at the Top (TOA) and at the Bottom Of Atmosphere (BOA) modeled based on AERONET aerosol retrievals. Six main types of atmospheric aerosols have been compared (desert mineral dust, biomass burning, urban-industrial, continental background, oceanic and free troposphere) in similar observational conditions (i.e., for solar zenith angles between 55&deg; and 65&deg;) in order to compare the nearly same solar geometry. The instantaneous &Delta;<i>F</i> averages obtained vary from −122 ± 37 Wm<sup>−2</sup> (aerosol optical depth, AOD, at 0.55 μm, 0.85 ± 0.45) at the BOA for the mixture of desert mineral dust and biomass burning aerosols in West Africa and −42 ± 22 Wm<sup>−2</sup> (AOD = 0.9 ± 0.5) at the TOA for the pure mineral dust also in this region up to −6 ± 3 Wm<sup>−2</sup> and −4 ± 2 Wm<sup>−2</sup> (AOD = 0.03 ± 0.02) at the BOA and the TOA, respectively, for free troposphere conditions. This last result may be taken as reference on a global scale. Furthermore, we observe that the more absorbing aerosols are overall more efficient at the BOA in contrast to at the TOA, where they backscatter less solar energy into the space. The analysis of the radiative balance at the TOA shows that, together with the amount of aerosols and their absorptive capacity, it is essential to consider the surface albedo of the region on which they are. Thus, we document that in regions with high surface reflectivity (deserts and snow conditions) atmospheric aerosols lead to a warming of the Earth-atmosphere system
Comprehensive tool for calculation of radiative fluxes: illustration of shortwave aerosol radiative effect sensitivities to the details in aerosol and underlying surface characteristics
The evaluation of aerosol radiative effect on broadband
hemispherical solar flux is often performed using simplified spectral and
directional scattering characteristics of atmospheric aerosol and underlying
surface reflectance. In this study we present a rigorous yet fast
computational tool that accurately accounts for detailed variability of both
spectral and angular scattering properties of aerosol and surface
reflectance in calculation of direct aerosol radiative effect. The tool is
developed as part of the GRASP (Generalized Retrieval of Aerosol and Surface
Properties) project. We use the tool to evaluate instantaneous and daily
average radiative efficiencies (radiative effect per unit aerosol optical
thickness) of several key atmospheric aerosol models over different surface
types. We then examine the differences due to neglect of surface reflectance
anisotropy, nonsphericity of aerosol particle shape and accounting only for
aerosol angular scattering asymmetry instead of using full phase function.
For example, it is shown that neglecting aerosol particle nonsphericity
causes mainly overestimation of the aerosol cooling effect and that
magnitude of this overestimate changes significantly as a function of solar
zenith angle (SZA) if the asymmetry parameter is used instead of detailed
phase function. It was also found that the nonspherical–spherical
differences in the calculated aerosol radiative effect are not modified
significantly if detailed BRDF (bidirectional reflectance distribution
function) is used instead of Lambertian approximation of surface
reflectance. Additionally, calculations show that usage of only angular
scattering asymmetry, even for the case of spherical aerosols, modifies the
dependence of instantaneous aerosol radiative effect on SZA. This effect can
be canceled for daily average values, but only if sun reaches the zenith;
otherwise a systematic bias remains. Since the daily average radiative
effect is obtained by integration over a range of SZAs, the errors vary with
latitude and season. In summary, the present analysis showed that use of
simplified assumptions causes systematic biases, rather than random
uncertainties, in calculation of both instantaneous and daily average
aerosol radiative effect. Finally, we illustrate application of the rigorous
aerosol radiative effect calculations performed as part of GRASP aerosol
retrieval from real POLDER/PARASOL satellite observations
Overview of the Chemistry-Aerosol Mediterranean Experiment/Aerosol Direct Radiative Forcing on the Mediterranean Climate (ChArMEx/ADRIMED) summer 2013 campaign
The Chemistry-Aerosol Mediterranean Experiment (ChArMEx; http://charmex.lsce.ipsl.fr) is a collaborative research program federating international activities to investigate Mediterranean regional chemistry-climate interactions. A special observing period (SOP-1a) including intensive airborne measurements was performed in the framework of the Aerosol Direct Radiative Impact on the regional climate in the MEDiterranean region (ADRIMED) project during the Mediterranean dry season over the western and central Mediterranean basins, with a focus on aerosol-radiation measurements and their modeling. The SOP-1a took place from 11 June to 5 July 2013. Airborne measurements were made by both the ATR-42 and F-20 French research aircraft operated from Sardinia (Italy) and instrumented for in situ and remote-sensing measurements, respectively, and by sounding and drifting balloons, launched in Minorca. The experimental setup also involved several ground-based measurement sites on islands including two ground-based reference stations in Corsica and Lampedusa and secondary monitoring sites in Minorca and Sicily. Additional measurements including lidar profiling were also performed on alert during aircraft operations at EARLINET/ACTRIS stations at Granada and Barcelona in Spain, and in southern Italy. Remote-sensing aerosol products from satellites (MSG/SEVIRI, MODIS) and from the AERONET/PHOTONS network were also used. Dedicated meso-scale and regional modeling experiments were performed in relation to this observational effort. We provide here an overview of the different surface and aircraft observations deployed during the ChArMEx/ADRIMED period and of associated modeling studies together with an analysis of the synoptic conditions that determined the aerosol emission and transport. Meteorological conditions observed during this campaign (moderate temperatures and southern flows) were not favorable to producing high levels of atmospheric pollutants or intense biomass burning events in the region. However, numerous mineral dust plumes were observed during the campaign, with the main sources located in Morocco, Algeria and Tunisia, leading to aerosol optical depth (AOD) values ranging between 0.2 and 0.6 (at 440 nm) over the western and central Mediterranean basins. One important point of this experiment concerns the direct observations of aerosol extinction onboard the ATR-42, using the CAPS system, showing local maxima reaching up to 150Mm(-1) within the dust plume. Non-negligible aerosol extinction (about 50Mm(-1)) has also been observed within the marine boundary layer (MBL). By combining the ATR- 42 extinction coefficient observations with absorption and scattering measurements, we performed a complete optical closure revealing excellent agreement with estimated optical properties. This additional information on extinction properties has allowed calculation of the dust single scattering albedo (SSA) with a high level of confidence over the western Mediterranean. Our results show a moderate variability from 0.90 to 1.00 (at 530 nm) for all flights studied compared to that reported in the literature on this optical parameter. Our results underline also a relatively low difference in SSA with values derived near dust sources. In parallel, active remote-sensing observations from the surface and onboard the F-20 aircraft suggest a complex vertical structure of particles and distinct aerosol layers with sea spray and pollution located within the MBL, and mineral dust and/or aged North American smoke particles located above (up to 6–7 km in altitude). Aircraft and balloon-borne observations allow one to investigate the vertical structure of the aerosol size distribution showing particles characterized by a large size (> 10 μm in diameter) within dust plumes. In most of cases, a coarse mode characterized by an effective diameter ranging between 5 and 10 μm, has been detected above the MBL. In terms of shortwave (SW) direct forcing, in situ surface and aircraft observations have been merged and used as inputs in 1-D radiative transfer codes for calculating the aerosol direct radiative forcing (DRF). Results show significant surface SW instantaneous forcing (up to (-90)Wm(-2) at noon). Aircraft observations provide also original estimates of the vertical structure of SW and LW radiative heating revealing significant instantaneous values of about 5 K per day in the solar spectrum (for a solar angle of 30 ) within the dust layer. Associated 3-D modeling studies from regional climate (RCM) and chemistry transport (CTM) models indicate a relatively good agreement for simulated AOD compared with observations from the AERONET/PHOTONS network and satellite data, especially for long-range dust transport. Calculations of the 3-D SW (clear-sky) surface DRF indicate an average of about -10 to -20Wm(-2) (for the whole period) over the Mediterranean Sea together with maxima (-50Wm(-2)) over northern Africa. The top of the atmosphere (TOA) DRF is shown to be highly variable within the domain, due to moderate absorbing properties of dust and changes in the surface albedo. Indeed, 3-D simulations indicate negative forcing over the Mediterranean Sea and Europe and positive forcing over northern Africa. Finally, a multiyear simulation, performed for the 2003 to 2009 period and including an ocean–atmosphere (O–A) coupling, underlines the impact of the aerosol direct radiative forcing on the sea surface temperature, O–A fluxes and the hydrological cycle over the Mediterranean.French National Research Agency (ANR)
ANR-11-BS56-0006ADEMEFrench Atomic Energy CommissionCNRS-INSU and Meteo-France through the multidisciplinary programme MISTRALS (Mediterranean Integrated Studies aT Regional And Local Scales)CORSiCA project - Collectivite Territoriale de Corse through Fonds Europeen de Developpement Regional of the European Operational ProgramContrat de Plan Etat-RegionEuropean Union's Horizon 2020 research and innovation program
654169Spanish Ministry of Economy and Competitivity
TEC2012-34575Science and Innovation
UNPC10-4E-442European Union (EU)Department of Economy and Knowledge of the Catalan Autonomous Government
SGR 583Andalusian Regional Government
P12-RNM-2409Spanish Government
CGL2013-45410-R
26225
The role of iron and black carbon in aerosol light absorption
International audienceIron is a major component of atmospheric aerosols, influencing the light absorption ability of mineral dust, and an important micronutrient that affects oceanic biogeochemistry. The regional distribution of the iron concentration in dust is important for climate studies; however, this is difficult to obtain since it requires in-situ aerosol sampling or simulation of complex natural processes. Simultaneous studies of aerosol chemical composition and radiometric measurements of aerosol optical properties, which were performed in the Negev desert of Israel continuously for about eight years, suggest a potential for deriving a relationship between chemical composition and light absorption properties, in particular the spectral single-scattering albedo. The two main data sets of the present study were obtained by a sun/sky radiometer and a stacked filter unit sampler that collects particles in coarse and fine size fractions. Analysis of chemical and optical data showed the presence of mixed dust and pollution aerosol in the study area, although their sources appear to be different. Spectral SSA showed an evident response to increased concentrations of iron, black carbon equivalent matter, and their mixing state. An empirical relationship that relates the spectral SSA, the percentage of iron in total particulate mass, and the pollution components was derived. Results calculated using this relationship were compared with measurements from dust episodes in several locations around the globe. The comparison reveals that dust over the eastern Mediterranean and Saudi Arabia contains less iron than that over Asia and the Sahara desert
Internally mixed aerosols observed by individual particle analysis and effect on optical properties
Combined use of TEM/EDX, microRaman and AFM for characterizing single atmospheric particles
Characterization of Saharan dust properties transported towards Europe in the frame of the FENNEC project: a case study
In the framework of the FENNEC experiment (6 to 30 June 2011) an effort has been dedicated to characterize Saharan dust plumes transported towards southern Europe. Hence, a multi instrumented field campaign has been conducted. Ground based nitrogen Raman LIDAR (GBNRL) has been deployed in southern Spain close to Marbella, simultaneously with airborne lidar (AL) performing measurements over both the tropical Atlantic Ocean and the western Africa (from 2 to 23 June). The GBNRL was equipped with co-polar and cross-polar channels to perform continuous measurements of the dust aerosols trapped in the troposphere. It was developed by LSCE with the support of the LEOSPHERE Company. The French FALCON 20 research aircraft operated by SAFIRE (Service des Avions Francais Instrumentés pour la Recherche en Environnement) carried the AL Leandre Nouvelle Generation (LNG) as well as a dropsonde releasing system and radiometers. A major, one week long, dust event has been sampled over Spain from 25 June to 1 July with high optical depth (>0.5 at 355nm) and particular depolarization ratios (15 to 25%). Backtrajectory studies suggest that the dust particles observed were from dust uplifts that occurred in Southern Morocco and Northern Mauritania. The event has been also documented 3 days before by the AL flying over Mauritania. AERONET sunphotometer measurements of aerosol properties, along the dust plume transport path appear to be coherent with both the lidar and the backtrajectory analysis. These analysis exhibit a likely major contribution from the Western Sahara sources to the Southern Europe. Such a contribution may impact the visibility and then the airtrafic, modify the tropospheric chemistry, and add nutrients to both the Mediterranean Sea and the continental surfaces. It can also affect the health of European populations. We will present strategy of the experiment and the case study built from measurements performed at the end of June