Polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB) in the equatorial Indian Ocean: Temporal trend, continental outflow and air-water exchange

Nineteen pairs of air and seawater samples collected from the equatorial Indian Ocean onboard the Shiyan I from 4/2011 to 5/2011 were analyzed for PCBs and HCB. Gaseous concentrations of Sigma(ICES)PCBs (ICES: International Council for the Exploration of the Seas) and HCB were lower than previous data over the study area. Air samples collected near the coast had higher levels of PCBs relative to those collected in the open ocean, which may be influenced by proximity to source regions and air mass origins. Dissolved concentrations of Sigma(ICES)PCBs and HCB were 1.4-14 pg L-1 and 0.94-13 pg L-1, with the highest concentrations in the sample collected from Strait of Malacca. Fugacity fractions suggest volatilization of PCBs and HCB from the seawater to air during the cruise, with fluxes of 0.45-34 ng m(-2) d(-1) and 0.36-18 ng m(-2) d(-1), respectively. (c) 2014 Elsevier Ltd. All rights reserved.Nineteen pairs of air and seawater samples collected from the equatorial Indian Ocean onboard the Shiyan I from 4/2011 to 5/2011 were analyzed for PCBs and HCB. Gaseous concentrations of Sigma(ICES)PCBs (ICES: International Council for the Exploration of the Seas) and HCB were lower than previous data over the study area. Air samples collected near the coast had higher levels of PCBs relative to those collected in the open ocean, which may be influenced by proximity to source regions and air mass origins. Dissolved concentrations of Sigma(ICES)PCBs and HCB were 1.4-14 pg L-1 and 0.94-13 pg L-1, with the highest concentrations in the sample collected from Strait of Malacca. Fugacity fractions suggest volatilization of PCBs and HCB from the seawater to air during the cruise, with fluxes of 0.45-34 ng m(-2) d(-1) and 0.36-18 ng m(-2) d(-1), respectively. (c) 2014 Elsevier Ltd. All rights reserved

Impact of environmental and innate factors on the food habit of Chinese perch Siniperca chuatsi (Basilewsky) (Percichthyidae)

Laboratory and field investigations were conducted to study the food habit of Chinese perch Siniperca chuatsi (Basilewsky) from first feeding through adult stage. Only fish larvae were consumed by Chinese perch larvae (2-21 days from hatching), and the presence of zooplankton did not have any significant effect on their survival rate. The ability of Chinese perch to feed on zooplankton is clearly limited by some innate factor. Instead of gill rakers, Chinese perch larvae have well-developed sharp teeth at the first feeding stage, and are well adapted to the piscivorous feeding habit unique to the larvae of Chinese perch, e.g. they bite and ingest the tails of other fish larvae. At the first feeding stage (2 days from hatching), daily rations were both very low, either in light or complete darkness. Although early-staged Chinese perch larvae (7-17 days from hatching) could feed in complete darkness, their daily rations were always significantly higher in light than in complete darkness. Late-staged Chinese perch larvae (21 days from hatching) were able to feed in complete darkness as well as in light, similar to the case of Chinese perch yearlings. Chinese perch yearlings (total length, 14-16 cm) consumed prey fish only and refused shrimp when visual cues were available (in light), but they consumed both prey when visual cues were not available (in complete darkness), suggesting that prey consumption by Chinese perch yearlings is affected by their sensory modality in predation. Both prey were found in the stomachs of similar-sized Chinese perch (total length, 14-32 cm) from their natural habitat, suggesting that shrimp are consumed by Chinese perch at night. Prey selection of Chinese perch with a length >38 cm, which consumed only fish in the field, appears to be based upon prey size instead of prey type. These results suggest that although environmental factors (e.g. light intensity) affect prey detection by Chinese perch, this fish is anatomically and behaviourally predisposed to prey on live fish from first feeding. This makes it a difficult fish to cultivate using conventional feeds.Laboratory and field investigations were conducted to study the food habit of Chinese perch Siniperca chuatsi (Basilewsky) from first feeding through adult stage. Only fish larvae were consumed by Chinese perch larvae (2-21 days from hatching), and the presence of zooplankton did not have any significant effect on their survival rate. The ability of Chinese perch to feed on zooplankton is clearly limited by some innate factor. Instead of gill rakers, Chinese perch larvae have well-developed sharp teeth at the first feeding stage, and are well adapted to the piscivorous feeding habit unique to the larvae of Chinese perch, e.g. they bite and ingest the tails of other fish larvae. At the first feeding stage (2 days from hatching), daily rations were both very low, either in light or complete darkness. Although early-staged Chinese perch larvae (7-17 days from hatching) could feed in complete darkness, their daily rations were always significantly higher in light than in complete darkness. Late-staged Chinese perch larvae (21 days from hatching) were able to feed in complete darkness as well as in light, similar to the case of Chinese perch yearlings. Chinese perch yearlings (total length, 14-16 cm) consumed prey fish only and refused shrimp when visual cues were available (in light), but they consumed both prey when visual cues were not available (in complete darkness), suggesting that prey consumption by Chinese perch yearlings is affected by their sensory modality in predation. Both prey were found in the stomachs of similar-sized Chinese perch (total length, 14-32 cm) from their natural habitat, suggesting that shrimp are consumed by Chinese perch at night. Prey selection of Chinese perch with a length >38 cm, which consumed only fish in the field, appears to be based upon prey size instead of prey type. These results suggest that although environmental factors (e.g. light intensity) affect prey detection by Chinese perch, this fish is anatomically and behaviourally predisposed to prey on live fish from first feeding. This makes it a difficult fish to cultivate using conventional feeds

Effects of 1.84 GHz radio-frequency electromagnetic field on sperm maturation in epididymis microenvironment

In recent years, intense interest has been drawn to the effects of radio-frequency electromagnetic field (RF-EMF) on reproduction. To explore the effects of RF-EMF on sperm maturation in epididymis microenvironment, 24 male Sprague Dawley (SD) rats were randomly divided into three exposed groups (SAR 1, 2 and 4 W/kg) and one sham group. The rats in exposed group were exposed to 1.84 GHz RFEMF for 5 days (1 h/day). After that, the rats were anaesthetized immediately and epididymis were taken out. Half of them were fixed in 4% formalin and the others were placed in tissue homogenate. The morphology of sperm and microstructure of epididymis were observed under microscope after hematoxylin eosin (HE) staining. Expression of Bin1b protein was detected by immunohistochemistry; the level of glutathione (GSH) and enzymes including superoxide dismutase (SOD), acid  phosphatase (ACP), alkaline phosphatase (ALP) and disaccharidase were determined by commercial kits. It was found that,  compared with sham group, the sperm morphology and microstructure of epididymis did not change obviously; similarly, there was no significant change in Bin1b protein expression and the levels of GSH, SOD, ACP and ALP in exposure group. These results  suggest that 1.84 GHz RF-EMF under this experimental condition could not affect the sperm maturation in epididymis  microenvironment of SD rats.Keywords: 1.84 GHz, radio-frequency electromagnetic field (RF-EMF), epididymis, sperm maturation, Bin1

Surface Morphology Evolution Mechanisms of InGaN/GaN Multiple Quantum Wells with Mixture N2/H2-Grown GaN Barrier

This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.Surface morphology evolution mechanisms of InGaN/GaN multiple quantum wells (MQWs) during GaN barrier growth with different hydrogen (H2) percentages have been systematically studied. Ga surface-diffusion rate, stress relaxation, and H2 etching effect are found to be the main affecting factors of the surface evolution. As the percentage of H2 increases from 0 to 6.25%, Ga surface-diffusion rate and the etch effect are gradually enhanced, which is beneficial to obtaining a smooth surface with low pits density. As the H2 proportion further increases, stress relaxation and H2 over- etching effect begin to be the dominant factors, which degrade surface quality. Furthermore, the effects of surface evolution on the interface and optical properties of InGaN/GaN MQWs are also profoundly discussed. The comprehensive study on the surface evolution mechanisms herein provides both technical and theoretical support for the fabrication of high-quality InGaN/GaN heterostructures.Peer reviewe

Methodology and applications of city level CO2 emission accounts in China

China is the world's largest energy consumer and CO2 emitter. Cities contribute 85% of the total CO2 emissions in China and thus are considered as the key areas for implementing policies designed for climate change adaption and CO2 emission mitigation. However, the emission inventory construction of Chinese cities has not been well researched, mainly owing to the lack of systematic statistics and poor data quality. Focusing on this research gap, we developed a set of methods for constructing CO2 emissions inventories for Chinese cities based on energy balance table. The newly constructed emission inventory is compiled in terms of the definition provided by the IPCC territorial emission accounting approach and covers 47 socioeconomic sectors, 17 fossil fuels and 9 primary industry products, which is corresponding with the national and provincial inventory. In the study, we applied the methods to compile CO2 emissions inventories for 24 common Chinese cities and examined uncertainties of the inventories. Understanding the emissions sources in Chinese cities is the basis for many climate policy and goal research in the future

Exergetic, economic and carbon emission studies of bio-olefin production via indirect steam gasification process

The indirect steam gasification of biomass to olefins (IDBTO) coupled with CO2 utilization was proposed and simulated. Energy and exergy efficiencies, net CO2 emissions, and economic evaluation were performed against IDBTO as well as the direct oxygen-steam gasification of biomass to olifins (DBTO). The influences of unreacted gas recycling fraction (RU) and CO2 to dry biomass mass ratio (CO2/B) on the thermodynamic performance of the processes were also studied. The results showed that the yields of olefins of DBTO and IDBTO were 17 wt% and 19 wt%, respectively, the overall energy and exergy efficiencies of the IDBTO were around 49% and 44%, which were 8% and 7% higher than those of the DBTO process, respectively. A higher RU was found favor higher energy and exergy efficiencies for both routes. Besides, for the IDBTO process, it is found that the addition of CO2 to gasification system led to an improvement in both energy efficiency and exergy efficiency by around 1.6%. Moreover, life-cycle net CO2 emission was predicted to be -4.4 kg CO2 eq./ kg olefins for IDBTO, while for DBTO, it was -8.7 kg CO2 eq./ kg. However, the quantitative economic performance of IDBTO was superior to that of the DBTO process

光机集成仿真前处理中点云边界检测技术

To resolve the data processing problem of point cloud for optical surface in general interface of optical;mechanical integrated simulation, the surface data processing method based on point cloud boundary detection was presented. First, the surface data preprocessing method in integrated simulation was discussed and effect of boundary detection in surface preprocessing data was also referred. Then, boundary detection algorithm referring to several techniques was researched including the data organization of point cloud, the small tangential plane fitting algorithm of the K;nearest neighbor node and the judgment of boundary node. Based on the research of point cloud boundary detection algorithm, the primary data structure and the program realization was discussed and by the extraction of demonstrated surface point cloud, the algorithm of boundary detection was proved to be right and effective. The algorithm of boundary detection provides the new technical reference for data process of optical surface. © 2016, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved