Re-examining models of shallow-water deltas: Insights from tank experiments and field examples

Shallow-water deltas remain enigmatic in terms of placing the observed facies within a coherent process-based depositional model. Here we report tank experiments on mouth-bar formation from shallow water pure and stratified jets that, combined with recent flume experiments on bedforms, suggest new interpretations of field observations from shallow-water delta outcrops. Our experiments imply that the height, geometry and bedforms of the mouth bars depend on the jet properties and grain size of the supplied sediment. Pure jets with very coarse-grained sediment formed a high and steep mouth bar that is characterised by steep angle-of-repose cross bedding with related avalanche processes (grain flows) on the lee side. The experiments with stratified jets imply that mouth-bar deposition and growth are dominated by supercritical density flows that evolve from the initial jets on the lee side of the growing mouth bar. In stratified jets with very coarse-grained sediment, deposition on the mouth-bar lee side was both from grain-flow avalanches and density flows. While deposition on the upper lee slope was dominated by grain flows, a concentric field of low relief, asymmetric, downflow-migrating bedforms evolved on the lower slope and beyond the mouth bar. In the stratified jet with medium-grained sediment a very low relief mouth bar formed within a concentric field of low, asymmetric, downflow-migrating bedforms covering the entire lee slope and the area beyond. Many previous field studies show that mouth bars deposited from dense stratified jets (hyperpycnal flows) are characterised by a distinct facies assemblage of coarse-grained cross-stratified or low-angle cross-stratified sandstone passing downslope into finer-grained plane-parallel, or “quasi-parallel” laminated sand and into climbing-ripple cross-laminated sandstone. Comparison to flume and tank experiments suggests that the proximal coarse-grained planar and trough cross-stratified sandstones could represent deposition by supercritical dunes that pass downslope into antidunes, characterised by sinusoidal stratification and/or low-angle cross stratification. The repeated vertical transition between antidune deposits and climbing-ripple cross-laminated sandstone may indicate the superposition of ripples onto antidunes in finer-grained sediments, indicating ripple formation under supercritical flow conditions. Similar bedforms/sedimentary structures have previously been interpreted as hummocky cross-stratification or swaley cross-stratification and attributed to combined flows in storm-dominated settings, which probably in some cases must be revised

Impact of Middle Pleistocene (Saalian) glacial lake-outburst floods on the meltwater-drainage pathways in northern central Europe: Insights from 2D numerical flood simulation

The terrestrial margins of the Middle Pleistocene ice sheets in northern central Europe were characterised by the formation of extensive ice-dammed lakes, which were controlled by the blockage of spillways by the ice margin. The largest ice-dammed lake had a volume of similar to 224 km(3) and formed in a late stage of the first Saalian ice advance (MIS 6) in central Germany. The failure of the ice dam in the bedrock-outlet channel triggered a major glacial lake-outburst flood. Flood-related erosional and depositional features include large-scale scours, trench-like channels, streamlined hills, giant bars and run-up deposits, indicating a wide spreading of the outburst flood in an early stage and the incision of trench-like valleys in a later stage. The incision of large valleys in the proximal flood pathway strongly impacted the regional drainage system by providing an efficient drainage network. The trench-like channels initiated by the lake-outburst flood became a crucial part of the ice-marginal drainage and subsequent fluvial system.The reconstructed outlet hydrographs imply peak discharges of 465,000-673,000 m(3)s(-1). The numerical simulation indicates flow depths of up to 87 m, flow velocities of up to 7 ms(-1), peaks of the bed shear stress of 2500 Nm(-2) and the inundation of large parts of northwestern Germany and the northern Netherlands. The numerical simulation of the outburst flood was conducted on both the modem digital elevation model and on palaeotopographic models, representing the palaeotopography prior to the outburst flood and during maximum flood-related incision, respectively.Distally, the outburst flood probably followed an east-west trending route through northwestern Germany and the central Netherlands into the ice-dammed lake in the southern North Sea Basin. The added water volume might have led to the overspill and drainage of the proglacial lakes in the central Netherlands and the North Sea Lake in a chain reaction, eventually opening an east-west trending meltwater-drainage pathway along the southwestern margin of the decaying ice sheet. (C) 2019 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Tectono-stratigraphic response of the Sandino Forearc Basin (N-Costa Rica and W-Nicaragua) to episodes of rough crust and oblique subduction

The southern Central American active margin is a world-class site where past and present subduction processes have been extensively studied. Tectonic erosion/accretion and oblique/orthogonal subduction are thought to alternate in space and time along the Middle American Trench. These processes may cause various responses in the upper plate, such as uplift/subsidence, deformation, and volcanic arc migration/ shut-off. We present an updated stratigraphic framework of the Late Cretaceous– Cenozoic Sandino Forearc Basin (SFB) which provides evidence of sedimentary response to tectonic events. Since its inception, the basin was predominantly filled with deep-water volcaniclastic deposits. In contrast, shallow-water deposits appeared episodically in the basin record and are considered as tectonic event markers. The SFB stretches for about 300 km and varies in thickness from 5 km (southern part) to about 16 km (northern part). The drastic, along-basin, thickness variation appears to be the result of (1) differential tectonic evolutions and (2) differential rates of sediment supply. (1) The northern SFB did not experience major tectonic events. In contrast, the reduced thickness of the southern SFB (5 km) is the result of at least four uplift phases related to the collision/accretion of bathymetric reliefs on the incoming plate: (i) the accretion of a buoyant oceanic plateau (Nicoya Complex) during the middle Campanian; (ii) the collision of an oceanic plateau (?) during the late Danian–Selandian; (iii) the collision/accretion of seamounts during the late Eocene–early Oligocene; (iv) the collision of seamounts and ridges during the Pliocene–Holocene. (2) The northwestward thickening of the SFB may have been enhanced by high sediment supply in the Fonseca Gulf area which reflects sourcing from wide, high relief drainage basins. In contrast, sedimentary input has possibly been lower along the southern SFB, due to the proximity of the narrow, lowland isthmus of southern Central America. Moreover, two phases of strongly oblique subduction affected the margin, producing strike-slip faulting in the forearc basin: (1) prior to the Farallon Plate breakup, an Oligocene transpressional phase caused deformation and uplift of the basin depocenter, triggering shallowing-upward of the Nicaraguan Isthmus in the central and northern SFB; (2) a Pleistocene–Holocene transtensional phase drives the NW-directed motion of a forearc sliver and reactivation of the graben-bounding faults of the late Neogene Nicaraguan Depression. We discuss arguments in favour of a Pliocene development of the Nicaraguan Depression and propose that the Nicaraguan Isthmus, which is the apparent rift shoulder of the depression, represents a structure inherited from the Oligocene transpressional phase

Glaciolacustrine deposits formed in an ice-dammed tributary valley in the south-central Pyrenees: new evidence for late Pleistocene climate

Combined geomorphic features, stratigraphic characteristics and sedimentologic interpretation, coupled with optically stimulated luminescence (OSL) dates, of a glacio-fluvio-lacustrine sequence (Linás de Broto, northern Spain) provide new information to understand the palaeoenvironmental significance of dynamics of glacier systems in the south-central Pyrenees during the Last Glacial Cycle (≈130 ka to 14 ka). The Linás de Broto depositional system consisted of a proglacial lake fed primarily by meltwater streams emanating from the small Sorrosal glacier and dammed by a lateral moraine of the Ara trunk glacier. The resulting glacio-fluvio-lacustrine sequence, around 55 m thick, is divided into five lithological units consisting of braided fluvial (gravel deposits), lake margin (gravel and sand deltaic deposits) and distal lake (silt and clay laminites) facies associations. Evolution of the depositional environment reflects three phases of progradation of a high-energy braided fluvial system separated by two phases of rapid expansion of the lake. Fluvial progradation occurred during short periods of ice melting. Lake expansion concurred with ice-dam growth of the trunk glacier. The first lake expansion occurred over a time range between 55 ± 9 ka and 49 ± 11 ka, and is consistent with the age of the Viu lateral moraine (49 ± 8 ka), which marks the maximum areal extent of the Ara glacier during the Last Glacial Cycle. These dates confirm that the maximum areal extent of the glacier occurred during Marine Isotope Stages 4 and 3 in the south-central Pyrenees, thus before the Last Glacial Maximum. The evolution of the Linás de Broto depositional system during this maximum glacier extent was modulated by climate oscillations in the northern Iberian Peninsula, probably related to latitudinal shifts of the atmospheric circulation in the southern North-Atlantic Ocean, and variations in summer insolation intensity

Depositional architecture and aggradation rates of sand-rich, supercritical alluvial fans: Control by autogenic processes or high-frequency climatic oscillations?

Alluvial fans are important paleoclimatic archives, that may record high-frequency climatic oscillations. However, climate signals may be overprinted or even be destroyed by autogenic processes caused by channel avulsion and lobe switching. Here we present new data from two different Late Pleistocene (MIS 3–2) alluvial fan systems in northern Germany and compare these systems to experimental alluvial fans and other field examples. The selected fan systems formed under similar climatic and tectonic conditions, but differ in size, type, and drainage area allowing to estimate the role of climate and autogenic controls on flow processes, facies architecture, and fan-stacking patterns. Luminescence dating is used to determine the timing of fan onset and aggradation. Fan onset occurred in response to climate change at the end of MIS 3 when temperatures decreased and periglacial climate conditions were established in northern central Europe. A related increase in sediment supply and strongly variable precipitation patterns probably promoted fan formation. The major period of fan aggradation was approximately between 33 and 18 ka, followed by fan inactivity, abandonment, and incision during the Lateglacial. The highest aggradation rates occurred during the early stage of fan building, when up to 35 m thick sediment accumulated within a few thousand years. Sand-rich, sheetflood-dominated fans are related to larger, low-gradient fan catchments. Steep depositional fan slopes (5°–17°) and short-lived high-energy floods promoted supercritical flow conditions. Well sorted, sediment-laden, rapidly waning flows favored the deposition and preservation of supercritical bedforms and allowed for the aggradation of stable antidunes. Steep, dip-slope catchments enhanced stream gradients and promoted the transport of coarser sediments. These fans have lower gradient slopes (2–6°) and are dominated by channelized flows, alternating with periods of unconfined sheetfloods. Meter-scale coarsening upward successions, characterized by sandy sheetflood deposits at the base, overlain by multilateral or smaller single-story gravelly channel fills may be related to high-frequency climatic fluctuations or seasonal fluctuations in water and sediment supply. These coarsening-upward successions are commonly bounded by a paleo-active layer, from which ice-wedge casts penetrate downwards. The comparison to experimental fans and other field examples implies that the recurrent pattern of multistory, multilateral and single-story channel bodies with a lateral offset to vertical stacking pattern most probably was controlled by autogenic switch in an avulsion-dominated system. The change in deposition from alluvial-dominated processes to aeolian sedimentation with minor alluvial influences during the Lateglacial records alternation of dry and ephemeral wetter phases that are related to rapid climatic variations. The main phase of aeolian sand-sheet deposition probably correlates with Heinrich event H1 between approximately 18–16 ka and reflects sedimentation in response to aridification and high mean wind speeds