Working Group 5: Measurements technology and active experiments

Technology issues identified by working groups 5 are listed. (1) New instruments are needed to upgrade the ability to measure plasma properties in space. (2) Facilities should be developed for conducting a broad range of plasma experiments in space. (3) The ability to predict plasma weather within magnetospheres should be improved and a capability to modify plasma weather developed. (4) Methods of control of plasma spacecraft and spacecraft plasma interference should be upgraded. (5) The space station laboratory facilities should be designed with attention to problems of flexibility to allow for future growth. These issues are discussed

Proceedings of the Spacecraft Charging Technology Conference: Executive Summary

Aerospace environments are reviewed in reference to spacecraft charging. Modelling, a theoretical scheme which can be used to describe the structure of the sheath around the spacecraft and to calculate the charging currents within, is discussed. Materials characterization is considered for experimental determination of the behavior of typical spacecraft materials when exposed to simulated geomagnetic substorm conditions. Materials development is also examined for controlling and minimizing spacecraft charging or at least for distributing the charge in an equipotential manner, using electrical conductive surfaces for materials exposed to space environment

Fcc-bcc transition for Yukawa interactions determined by applied strain deformation

Calculations of the work required to transform between bcc and fcc phases yield a high-precision bcc-fcc transition line for monodisperse point Yukawa (screened-Couloumb) systems. Our results agree qualitatively but not quantitatively with previously published simulations and phenomenological criteria for the bcc-fcc transition. In particular, the bcc-fcc-fluid triple point lies at a higher inverse screening length than previously reported.Comment: RevTex4, 9 pages, 6 figures. Discussion of phase coexistence extended, a few other minor clarifications added, referencing improved. Accepted for publication by Physical Review

Stress-associated metabolites vary with both season and habitat across populations of a climate sentinel species

Relating physiological stress to habitat quality could refine conservation efforts. Habitat quality, which is often inferred from patch occupancy or demographic rates, might be measured in a more timely and nuanced way using metrics of physiological stress. To understand whether stress-associated hormones vary with metrics of habitat quality, we measured fecal glucocorticoid metabolite (FGM) levels in the American pika (Ochotona princeps), a small mammal with well-defined habitat (talus), which can vary in quality depending on the presence of subsurface ice features. In spring and fall 2018, we collected feces noninvasively from pika territories in taluses “with” or “without” subsurface ice to capture seasonal variation in FGM between habitat types. We used linear mixed effects models to explore the interactions among season, habitat metrics (including subsurface ice status), and subsurface temperature as predictors of FGM. We found support for interacting effects on FGM levels, which covaried with season, elevation, putative ice presence, graminoid to forb ratio, graminoid cover, and measures of acute subsurface heat exposure. However, only one subsurface temperature metric differed according to putative presence of subsurface ice. Our results contribute to the growing evidence that FGMs might be developed as a tool to assess habitat quality

First comparison of French and Australian OsHV-1 µvars by bath exposure

Economically devastating mortality events of farmed and wild shellfish due to infectious disease have been reported globally. Currently, one of the most significant disease threats to Pacific oyster Crassostrea gigas culture is the ostreid herpesvirus 1 (OsHV-1), in particular the emerging OsHV-1 microvariant genotypes. OsHV-1 microvariants (OsHV-1 μvars) are spreading globally, and concern is high among growers in areas unaffected by OsHV-1. No study to date has compared the relative virulence among variants. We provide the first challenge study comparing survival of naïve juvenile Pacific oysters exposed to OsHV-1 μvars from Australia (AUS μvar) and France (FRA μvar). Oysters challenged with OsHV-1 μvars had low survival (2.5% exposed toAUS μvar and 10% to FRA μvar), and high viral copy number as compared to control oysters(100% survival and no virus detected). As our study was conducted in a quarantine facility located~320 km from the ocean, we also compared the virulence of OsHV-1 μvars using artificial seawater made from either facility tap water (3782 μmol kg−1seawater total alkalinity) or purchased distilled water (2003 μmol kg−1). Although no differences in survival or viral copy number were detected in oysters exposed to seawater made using tap or distilled water, more OsHV-1 was detected in tanks containing the lower-alkalinity seawater, indicating that water quality may be important for virus transmission, as it may influence the duration of viral viability outside of the hos

On the Formation of Planetesimals via Secular Gravitational Instabilities with Turbulent Stirring

We study the gravitational instability (GI) of small solids in a gas disk as a mechanism to form planetesimals. Dissipation from gas drag introduces secular GI, which proceeds even when standard GI criteria for a critical density or Toomre's $Q$ predict stability. We include the stabilizing effects of turbulent diffusion, which suppresses small scale GI. The radially wide rings that do collapse contain up to $\sim 0.1$ Earth masses of solids. Subsequent fragmentation of the ring (not modeled here) would produce a clan of chemically homogenous planetesimals. Particle radial drift time scales (and, to a lesser extent, disk lifetimes and sizes) restrict the viability of secular GI to disks with weak turbulent diffusion, characterized by $\alpha \lesssim 10^{-4}$. Thus midplane dead zones are a preferred environment. Large solids with radii $\gtrsim 10$ cm collapse most rapidly because they partially decouple from the gas disk. Smaller solids, even below $\sim$ mm-sizes could collapse if particle-driven turbulence is weakened by either localized pressure maxima or super-Solar metallicity. Comparison with simulations that include particle clumping by the streaming instability shows that our linear model underpredicts rapid, small scale gravitational collapse. Thus the inclusion of more detailed gas dynamics promotes the formation of planetesimals. We discuss relevant constraints from Solar System and accretion disk observations.Comment: Accepted for publication in the Astrophysical Journal; 20 pages, 10 figure

Shrinking and Splitting of drainage basins in orogenic landscapes from the migration of the main drainage divide

International audienceClimate, and in particular **the spatial pattern of precipitation, is thought to affect* *the topographic and tectonic evolution of mountain belts through erosion. Numerical model simulations of landscape erosion controlled **by horizontal tectonic motion or orographic precipitation result in the asymmetric topography that characterizes most natural mountain belts, and in a continuous migration of the main drainage divide. The effects of such a migration have, however, been challenging to observe in natural settings. Here I document the effects of a lateral precipitation gradient on a landscape undergoing constant uplift in a laboratory modelling experiment. In the experiment, the drainage divide migrates towards the drier, leeward side of the mountain range, causing the drainage basins on the leeward side to shrink and split into* *smaller basins. This mechanism results in a progressively increasing number of drainage basins on the leeward side of the mountain range as the divide migrates, such that the expected relationship between the spacing of drainage basins and the location of the main drainage divide is maintained. I propose that this mechanism could clarify the drainage divide migration and topographic asymmetry found in active orogenic mountain ranges, as exemplified by the Aconquija Range of Argentin

Hydrodynamic Analysis of a Wave Energy Converter (WEC)

Honorable Mention Winner The UNF CREW competing in the U.S. Department of Energy 2021 Marine Energy Collegiate Competition developed a Wave Energy Converter (WEC) for quick deployment in disaster relief areas. When natural disasters disable coastal power grids, a WEC can be easily deployed close to shore and serve as a source of electricity. The ocean waves move magnets through a coil wired within the WEC to generate electricity. To initiate the design process, ANSYS AQWA software simulated both the oceanic environment and the device’s response in the WEC’s testing conditions. AQWA allows the user to change device dimensions easily and optimize the design ahead of physical construction. The resulting WEC proof of concept minimized prototype manufacturing waste and cost by eliminating poor designs in advance. The simulated geometry neglected hollow sections and used unidirectional, regular waves to account for software limitations. The software simulated the WEC for 20 seconds in an oceanic environment with a 40-meter depth and a 0.25-meter amplitude regular wave. Simulations produced graphs and animations describing the forces acting on the WEC as well as the WEC’s movement. The animation proved that the WEC reacts well in similar physical testing conditions. Based on the simulation results, the team constructed a 3D model for small-scale testing. Future investigations will involve more complex designs. Research conducted onward will focus on mass-damper systems and contact surfaces provided in the software

Optimization of Power Performance of a Wave Energy Converter

With climate change on the rise, unprecedented dependence on electricity, and an increased incidence of extreme weather, the UNF team participating in the U.S. Department of Energy 2021 Marine Energy Collegiate Competition: Powering the Blue Economy wants to give an alternative solution to provide renewable energy in areas that lose electricity as a result of a natural disaster, or that due to their isolated location cannot use traditional renewable energy sources. This led to the creation of the Osprey C.R.E.W (Cheap Reliable Energy from Waves). The Osprey C.R.E.W. is a wave energy converter that uses the vertical motion of the ocean waves to generate electricity. The principle of energy conversion is Faraday’s Law of Electromagnetic Induction, which states that a magnetic field moving past a conductor will generate electricity. The UNF team has developed a numerical simulation to test how different parameters influence the output and has built three small-scale prototypes that have been tested in a wave tank. A medium-sized prototype and a wave pool are being constructed, with the expectation that the size will also increase the output

Cost Analysis of Osprey C.R.E.W.

Renewable energy adoption is on the rise in the U.S. and abroad. More than ever, energy sourcing needs to shift away from harmful fossil fuels and towards fully renewable energy sources. Adapting from traditional fossil fuel energy sources to renewable energy sources is paramount for environmental health and public health. Fossil fuels emit harmful pollutants, which have led to changing weather conditions and exasperated natural disasters. Existing renewable sources are not ideal, either. For instance, solar cannot run continuously and wind turbines are subject to weather changes. The recent energy debacle in Texas shows the need for alternative renewable energy sources. The Osprey C.R.E.W. wave energy converter (WEC) alleviates many of the current problems existing renewable energy systems cannot solve. First, it provides reliable and constant service. With other renewable energy services, there will be stops in production. However, there are no stops in wave energy because the waves are constant. Another positive of the WEC device is that their deployments are flexible and scalable. This means that energy production levels can be changed rapidly and without delay. The average cost per device falls significantly with seamless scalability, making large increments of devices procured in a relatively cost-effective manner. Cost comparisons between competing energy sources show that the WEC is very cost-efficient as well. The cost of producing wave energy is found to be more efficient than solar energy and wind alternatives. Our cost figures also show that Osprey C.R.E.W provides a very competitive alternative to the primary fossil fuel producers such as coal and fuel